Enclosure variants
Medium and Large Disk Enclosure variants are described.
The IBM COS Medium and Large Disk Enclosure
is configured as an expansion enclosure, as shown in the table below. The enclosure supports 106
qualified disk drive modules installed via the top panel.
- Hot-swappable expanders support 96 disks attached to four 24 hard disk drive base planes (12
disks x 8 rows)
If an expander is removed for replacement, the 24 hard disk drive base plane will continue to operate while the high-availability card is replaced.
- The 10 hard disk drive base plane PCBA supports 10 disks (2 disks x 5 rows).
| Description of configuration | PSUs1 | System fans2 | IOMs3 | IOM fans2 | Disks | HS expanders |
|---|---|---|---|---|---|---|
| 12 Gb/s direct dock LFF | 2 | 4 | 1 | 2 | 106 | 4 |
| Enclosure location of CRU variant | Rear | Rear | Rear | Top | Top | Top |
- 1 Redundant PSUs must be compatible modules of the same type (both AC).
- 2 For adequate cooling, four rear-panel system fans are required, and two IOM fans provide cooling for the IOMs (accessed via the top panel).
- 3 Hot-swappable expanders support 12 disk drive slots per disk bay (8 bays total).