Installing a controller fan module

Edit online

About this task

Refer to Figure 1 and Figure 2 when performing this procedure, but ignore the directional arrow—since you will insert the module into the slot—rather than remove it.
Important: Handle the controller fan carefully, and avoid damaging connectors.

Procedure

  1. Check for damage, especially to all module connectors.
  2. Align the controller fan module for use in the fan slot that is accessible from the top panel.
  3. Insert the controller fan module into the slot, and gently press down on the module until it seats firmly in its connector.
  4. Verify that the Controller Fan Status LED is off. Verify that the front panel LED states show no amber module faults.
  5. If replacing multiple fans, repeat this procedure.