Command parameters for the edit mode
| Parameter | Value Format | Recommended Value | Example |
|---|---|---|---|
|
channel data port |
ethX |
The Ethernet port name to be used for this network |
eth0 |
|
channel data ip |
xxx.xxx.xxx.xxx |
IP address of the node |
1.2.3.4 |
|
channel data netmask |
xxx.xxx.xxx.xxx |
Network Mask for the IP range of the node |
255.255.255.0 |
|
channel data gateway |
xxx.xxx.xxx.xxx |
IP address of the Network Gateway |
1.2.3.1 |
|
channel data ipv6_ip |
xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx |
IPv6 address of the node |
fe00:d7::2/64 |
|
channel data ipv6_netmask |
0-127 |
Network Mask for the IPv6 range of the node |
64 |
|
channel data ipv6_gateway |
xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx |
IPv6 address of the Network Gateway |
fe00:d7::1 |
|
system hostname |
host.domain.com |
Fully Qualified Domain Name of the node |
node1234.example.com |
|
system dns |
xxx.xxx.xxx.xxx, xxx.xxx.xxx.xxx |
Two or three IP addresses for DNS Servers, comma-separated only |
8.8.8.8,8.8.4.4 |
|
port |
ethX mtu #\##\# |
eth0 mtu 1500 |
eth0 mtu 1500 |
|
system organization |
Company |
Company Name |
IBM® |
|
system orgunit |
OrgName |
Department or Organizational Name to which the node belongs |
Popconfig |
|
system city |
City |
City in which the node is located |
Chicago |
|
system state |
State |
State or Province in which the node is located |
Illinois |
|
system country |
XX |
Two-letter ISO Country code for the Country in which the node is located. See (ISO 3166 Country Codes) |
US |
|
manager ip |
xxx.xxx.xxx.xxx |
IP Address of the Manager Appliance CAUTION: Skip this step if configuring with the Manager Node.
|
1.2.3.4 |
|
manager ipv6_ip |
xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx |
IPv6 Address of the Manager Appliance CAUTION: Skip this step if configuring with the Manager Node.
|
fe00:d7::6/64 |
|
system ntpservers |
Fully Qualified Domain Name of the NTP Servers. Note: Only run on the Manager Node
|
pool1.ntp.org, pool2.ntp.org |