Appliance physical interface
This section provides an overview of the components and summary of appliance features.
External features
The front panel of the system is shown below in the figure. Each drive is mounted on a drive carrier assembly with a push-down lever for quick installation and removal. Each populated disk drive carrier has an LED display that indicates the status of the disk drive (see Table 2):
| Status | Color |
| No drive present | Off |
| Activity | Flashing Green |
| Idle – no activity | Off |
| Fault | Amber |
CAUTION:
To maintain proper airflow and cooling inside the chassis, all drive slots must
have a disk driver carrier or tray. The system should never be operated with empty drive
slots.
Note: See the figure showing Right Front Panel Detail – SFF ODP for more details about the
Power/LED display features.
| Item | Description |
| 1 | Left/Right Handle |
| 2 | Pull Tag |
| 3 | SAS/SATA Drives Bays |
| 4 | Operational Display Panel (ODP) |
| 5 | USB 2.0 port |
| Item | Description |
| 1 | Power On/Off |
| 2 | UID |
| 3 | USB 2.0 (1x) port |
| 4 | System Power LED
|
| 5 | UID |
| 6 | Network Activity |
| 7 | Power Fault |
| 8 | System Health |
| Item | Description |
| 1 | PSU 2 |
| 2 | PSU 1 |
| 3 | Quad Port 10Gb NIC (AJ5W feature) or Quad Port 10GBase-T NIC(AJ5J feature as shown in rear panel image) |
| 4 | UID |
| 5 | 10GbE LAN Port (2x) |
| 6 | USB 3.0 ports (2x) |
| 7 | Management Ethernet (IPMI) port |
| 8 | VGA port |
System Components
The following figure identifies the components of the system and displays the locations of the components which you can replace (CRU).
| Item | Description |
| 1 | OS drives |
| 2 | System Fans (7x) |
| 3 | DIMM Slots1 |
| 4 | CMOS battery |
| 5 | PCIe Slot for (C10) External Disk Controller (M10 Raid Card |
| 6 | Not used |
| 7 | PSU (2x) |
| 8 | CPU Heat Sink and CPU1 |
| 9 | Asset Tag |
- 1 Field Replaceable Unit (FRU) only