SS4PJT_6.4.0 - Documentation Index

Table of Contents

• Welcome
• What is IBM Connect:Direct?
  • IBM Connect:Direct Servers and Clients
  • IBM Connect:Direct User Interfaces
• Working With IBM Connect:Direct
  • Local Node Definition
  • Remote Node Definitions
  • Defining the Work IBM Connect:Direct Will Perform
    • Process Language
    • Creating IBM Connect:Direct Processes
  • Managing the Work
    • Tools to Help You Manage Processes
• Extending the Capabilities of IBM Connect:Direct
  • Enhanced Security
    • Connect:Direct Secure Plus
    • Secure Proxy
  • Enterprise Management with Control Center
  • Process Integration with B2B Integrator
  • Unattended File Management with Connect:Direct Integrated File Agent
  • Other Tools/Options to Extend Capabilities
  • IBM Connect:Direct FTP+
• IBM Sterling Connect:Direct for UNIX
  • Connect:Direct for UNIX Overview
    • Process Manager
    • Command Manager
    • Session Manager
    • User Authorization
    • Process Restart
    • Archive Statistics Files
    • Sample Processes, Shell Scripts, and API Programs
    • Configuration Files
  • Release Notes
    • New Features and Enhancements
    • Hardware and Software Requirements
      • Libraries to Install
      • Supported File Systems
      • Virtualization and public cloud support
    • Known Restrictions
    • Support policy for Container Delivery Models
  • Planning
    • Conventions to Observe When Installing Connect:Direct for UNIX
    • Worksheet Instructions
      • Installation Worksheet
      • Customization Worksheet
      • User Authorization Information File Worksheet
      • CLI/API Configuration File Worksheet
      • Network Map Remote Node Information File Worksheet (TCP/IP)
      • Server Authentication Key File Worksheet
      • Client Authentication Key File Worksheet
    • Preparing to Install Connect:Direct for UNIX in a Cluster Environment
      • High-Availability Cluster Environments
      • Load-Balancing Cluster Environments
    • Malware and Virus Scanning Guidelines
    • Installer Signature Verification
  • Installing
    • Installation Overview
    • Installing Connect:Direct for UNIX
      • Preparing to Install Connect:Direct for UNIX in a Cluster Environment
        • High-Availability Cluster Environments
        • Load-Balancing Cluster Environments
      • Conventions to Observe When Installing Connect:Direct for UNIX
      • Special Considerations
      • Installation Worksheets
        • Installation Worksheet
        • Customization Worksheet
        • User Authorization Information File Worksheet
        • CLI/API Configuration File Worksheet
        • Network Map Remote Node Information File Worksheet (TCP/IP)
        • Server Authentication Key File Worksheet
        • Client Authentication Key File Worksheet
      • Installing IBM Connect:Direct
      • Customizing Connect:Direct for UNIX
      • Setting Up the IBM Connect:Direct Server
        • Customizing the User Authorization Information File
        • Creating an Authentication Key File
      • Setting Up the Connect:Direct for UNIX Client
        • Configuring Connect:Direct for UNIX Using Root Privilege
        • Customizing the Owner and Permissions for the Executable Files
      • Upgrading to Connect:Direct Integrated File Agent
      • Defining High-Availability Settings in the Configuration Files
        • Setting Up Additional Configuration Requirements in a SunCluster 3.X Environment
        • Configuring Additional Requirements in a SunCluster 2.2 Environment
      • Setting Up Additional Configuration Requirements for IBM HACMP
      • Setting Up Additional Configuration Requirements for Hewlett-Packard MC/ServiceGuard
    • Installing Connect:Direct Secure Plus
      • Connect:Direct Server and its Client connections
    • Installing Connect:Direct File Agent
    • Connect:Direct for UNIX silent installation
      • Sterling Connect:Direct for UNIX silent installation options file and command-line parameters
      • cdinstall_a script operation
      • Basic installation and configuration
      • Installing Connect:Direct for UNIX
      • Upgrading or applying a fix pack to Connect:Direct for UNIX
      • Uninstalling Connect:Direct for UNIX
      • Complete installation and configuration
      • Installing Connect:Direct for UNIX with optional files
      • Upgrading or applying a fix pack to Connect:Direct for UNIX with optional files
      • Configuring and monitoring Connect:Direct for UNIX with Control Center
    • Verifying the Installation
    • Uninstalling Connect:Direct for UNIX
    • Deploying IBM Sterling Connect:Direct for UNIX Container
      • Planning
        • Verifying System Requirements
        • Azure Kubernetes Cluster Platform
        • Installing OpenShift Container platform
        • Brief about IBM Sterling Connect:Direct for UNIX Container
        • Application license requirements
        • IBM Licensing and Metering service
        • Standard Privilege Mode in IBM Sterling Connect:Direct for UNIX Container
        • Standard User Mode in IBM Sterling Connect:Direct for UNIX Container
        • Certificates files for Secure Plus
        • Security Context Constraints requirements
        • Hardening RedHat OpenShift Cluster
        • Encrypting etcd data
        • Running External Utilities/Tools
        • Configure AWS CloudWatch for Rendering Container Logs (EKS)
      • Installing
        • Setting up your registry server
        • Setting up Namespace or project
        • Installing and configuring IBM Licensing and Metering service
        • Downloading IBM Sterling Connect:Direct for UNIX Container
          • Online Cluster
          • Offline (Airgap) Cluster
            • Prerequisites
            • Prepare a host
            • Set environment variables and download CASE files
          • Image Signature Verification
        • Applying Pod Security Standard Kubernetes Cluster
        • SecurityContextConstraints (SCC) for IBM Connect:Direct for UNIX Container
        • Creating storage for Data Persistence
        • Creating secret
        • Configuring- Understanding values.yaml
        • Installing IBM Connect:Direct for Unix using Helm chart
        • Validating the Installation
      • Post-installation tasks
      • Upgrade, Rollback, and Uninstall
        • Upgrade – Upgrading a Release
        • Rollback – Recovering from failure
        • Uninstall – Deleting a Release
      • Known Limitations
      • Migrating to Connect:Direct for UNIX Container
      • Migration from Helm 2 to Helm 3
      • Troubleshooting
        • Troubleshooting IBM Sterling Connect:Direct for UNIX Container
        • Troubleshooting Cluster Resources
  • Upgrading
    • Upgrading Guidelines
    • Upgrading to Connect:Direct Integrated File Agent
    • Upgrading via Control Center Director while using systemd service
  • Administration Guide
    • Password Storage
    • Maintaining configuration files
      • Modifying configuration files
    • Maintaining the Initialization Parameters
      • Contents of the initialization parameters file
      • Updating records
        • Path record
        • Node name record
        • PAM service record
        • Quiesce/resume record
        • Priority record
        • Restrict record
        • Remote node connection record
        • Transmission Control Queue record
        • Connect:Direct Secure Plus record
        • Global Copy record
        • Global Run Task record
        • Statistics file information record
        • Server authentication record
        • User exit record
        • Secure cdpmgr initialization procedure
        • License record
        • install.agent record
        • Backup locations record
        • cd.file.agent Record
        • port.check record
      • Firewall navigation record
    • Maintaining the client configuration file
      • Contents of the client configuration file
        • API configuration record
        • CLI configuration record
        • Client authentication record
    • Maintaining the network map file
      • Contents of the network map file
      • Local node connection record
      • TCP/IP Default Record
      • Remote Node Connection Record
    • Maintaining access information files
      • User Authorization Information File
        • Local User Information Record
        • Remote User Information Record
        • API User Information Record
      • Strong Access Control File
      • Automatic Detection of Shadow Passwords
      • Limiting Access to the Program Directory
      • Security Exit
    • Maintaining client and server authentication key files
      • Key File Format
      • Key File Parameters
      • Sample Client Authentication Key File
      • Authentication Process
        • Server Authentication Parameters
        • Client Authentication Parameters
      • Session Establishment
    • Firewall Navigation
      • Implement Firewall Navigation
      • Firewall Rules
      • TCP Firewall Configuration Example
    • Specifying connection information
      • IP Addresses
      • Host Names
      • Port Numbers
      • Multiple Addresses, Host Names, and Ports
      • About Using Masks for IP Address Ranges
    • Using Connect:Direct in a test mode
      • Processing Flow of the Test Mode
      • Preparing the NDMPXTBL Parameter Table
        • NDMPXTBL Parameter Table
      • Sample Test Scenarios
    • Stopping IBM Connect:Direct
  • User Guide
    • Connect:Direct Commands
      • Abbreviations for Common IBM Connect:Direct Commands
      • Restricting the Scripts and UNIX Commands Users Can Execute
      • IBM Connect:Direct Command Syntax
    • Using CLI
      • Starting the CLI
      • Stopping the CLI
      • CLI Commands
      • CLI Job Control
      • CLI History Commands
    • Controlling and Monitoring Processes
      • Process Queuing
        • The Execution Queue
        • The Wait Queue
        • The Timer Queue
        • The Hold Queue
      • Submitting a Process
        • Scheduling IBM Connect:Direct Activity
        • Example - Submit a Process That Runs Every Week
        • Example - Submit a Process with a Start Time Specified
        • Example - Submit a Process with No File Value
        • Example - Submit a Process and Turn On Tracing
      • Changing Process Parameters
      • Deleting a Process from the TCQ
      • Removing a Process from the Execution Queue
      • Viewing a Process in the TCQ
      • Monitoring Process Status in the TCQ
      • Determining the Outcome of a Process
      • Generating a Detailed Output Report for a Process
      • Generating a Summary Report for a Process
    • IBM Sterling Connect:Direct Utilities
      • Creating a Translation Table
      • Compiling a Translation Table Using the ndmxlt Utility
      • Example—Creating a Translation Table
      • Example—Modifying a Model Translation Table
      • Using Translation During File Transfer Operations
      • Translation Table Error Messages
      • Accessing IBM Connect:Direct Messages
        • Message File Content
        • Message File Record Format
        • Displaying Message Text
      • Precompressing/Decompressing Files Using the Standalone Batch Compression Utility
        • Special Considerations for Using the Standalone Batch Compression Utility
        • Using the Standalone Batch Compression Utility
        • Example—Precompress a Text File
        • Example—Precompress a Text File With Codepage Conversion
        • Example—Precompress a Binary File
        • Example—Decompress a Text File
        • Examples—csdacomp Command Help
        • Example—Decompress a File on the Remote Node During the Copy Step
        • Example—Send Precompressed File to z/OS and Storing It as Precompressed
      • Validate Configuration Files
      • Configuration Reports
        • Generating a Configuration Report on the Base Installation
        • Generating a Configuration Report on Connect:Direct Secure Plus for UNIX
    • Writing Custom Programs
      • Compiling Custom Programs
      • Writing Custom C Programs
        • Creating a Connection to IBM Connect:Direct Using ndmapi_connect() or ndmapi_connect_c()
        • Terminating a Connection Using ndmapi_disconnect() or ndmapi_disconnect_c()
        • Receiving Responses Using ndmapi_recvresp() or ndmapi_recvresp_c()
        • Sending a Command to IBM Connect:Direct Using ndmapi_sendcmd() or ndmapi_sendcmd_c()
      • Writing Custom C++ Programs
    • Writing User Exits
      • User Exit Functions
        • Initializing Communications with exit_child_init() or exit_child_init_c()
        • Waiting for a Message Using recv_exit_msg() or recv_exit_msg_c()
        • Passing a File Descriptor Using send_exit_file() or send_exit_file_c()
        • Sending a Message to IBM Connect:Direct Using send_exit_msg() or send_exit_msg_c()
      • Overview of User Exit Messages
        • Statistics Exit Message
        • File Open Exit Messages
        • Security Exit Messages
        • User Exit Stop Message
        • Copy Control Block
      • Exit Log Files
  • Secure Plus
    • Before You Begin
      • Security Concepts
      • Identifying Expert Security Administrator
      • Assessing Security Requirements of Trading Partners
      • Planning Your Implementation of IBM Connect:Direct
      • Completing the Worksheets
    • Plan Your Implementation of the TLS Protocol
      • Overview of the TLS Protocol
      • Protocol Support
        • Transport Layer Security Protocol (TLS)
        • NIST SP800-131a and Suite B support
      • Self-Signed and CA-Signed Certificates
        • Certificate Terminology
    • Secure Plus Tools
      • Secure+ Admin Tool
      • Secure+ Parameters File
      • Secure+ Access File
      • Strong Password Encryption Parameters File
      • Connect:Direct Secure Plus Command Line Interface
    • Set Up Connect:Direct Secure Plus
      • Install Connect:Direct Secure Plus
      • Starting the Secure+ Admin Tool
        • Accessing Secure+ Admin Tool Help
      • Populating the Secure+ Parameters File
    • Node Configuration Overview
      • Import Existing Certificates
      • Create PKCS12 Key Store
      • Configuring the Connect:Direct Secure Plus .Local Node Record
      • Customize Remote Node Records
      • Configuring a Remote Node Record
      • Validating the Configuration
      • Configure External Authentication in the .SEAServer Record
      • Configure Strong Password Encryption
        • Disabling Strong Password Encryption
        • Enabling Strong Password Encryption
        • Resetting Passwords
        • Decryption Failure
    • Configure Certificate Authentication for Client API Connections
    • Automate Setup with the Secure+ CLI
      • Automation Scripts
        • Configure Connect:Direct Secure Plus to Use the TLS Protocol
      • Sample Script
    • Configure Secure Plus Using the Command Line Interface
      • Start and Set Up the Secure+ CLI
        • Starting the Secure+ CLI
        • Control the Display of Commands
        • Control Help
      • Encrypt Passwords to Use with the Secure+ CLI
      • Maintain the Secure+ Parameters File
        • Display Information
      • Manage PKCS12 Keystore
      • Update the .Local Node Record
      • Manage Remote Node Records
        • Create a Remote Node Record
        • Update the Remote Node Record
        • Display a Remote Node Record
        • Delete a Remote Node Record
      • Update the .Client Node Record
      • Maintain the Sterling External Authentication Server Record
        • Update the Sterling External Authentication Server Record
        • Display the Sterling External Authentication Record
      • Strong Password Encryption
        • Update the .Password File
        • Display the .Password File
    • Maintain Connect:Direct Secure Plus
      • Node List Field Descriptions
      • Viewing Node Record Change History
      • Viewing Information about the Secure+ Parameters File
      • Modify a Connect:Direct Secure Plus Configuration
        • Disabling Connect:Direct Secure Plus
        • Deleting a Remote Node Record
        • Resecuring the Secure+ Parameters File and Secure+ Access file
    • Accessing Connect:Direct Secure Plus Statistics
      • IBM Connect:Direct CLI Select Statistics Detail
      • Session Start (SSTR) Record
      • Copy Termination (CTRC) Record
    • Secure Plus Audits
      • Access Secure+ Parameters File Audit Logs
      • Secure+ Parameters File Audit Log Entries
      • IBM Connect:Direct Secure Plus Certificate Auditing
        • Certificate Audit Log Entries
        • Access Certificate Audit Logs
        • Certificate Audit Log Error Reporting
    • Configuration Worksheets
      • Local Node Security Feature Definition Worksheet
      • Remote Node Security Feature Definition Worksheet
    • Use the LCU to Configure Encrypted Passwords
    • Self-signed Certificate for Integrated File Agent
  • Using object store providers
    • Setting up Connect:Direct Node on object store providers
    • Setting up Connect:Direct Node for object store providers
    • Setting up CA certificates used for secure connections to an object store
    • Credentials
    • Endpoints
    • Amazon S3 bucket arn and access points
    • Stores Properties
    • Logging
    • Override Mechanism
    • Integrated File Agent
    • Limitations
  • HSAO 2: Using Connect:Direct with IBM Aspera faspio Gateway
  • IBM Control Center Director Support
    • Configuring Connect:Direct for Server and Upgrade Management
    • Configuring Connect:Direct for License Governance
    • Configuring Connect:Direct after New Install
    • Configuring Connect:Direct for Custom Locations of Connect:Direct Backups and Installation Programs
  • High Availability
    • Defining High-Availability Settings in the Configuration Files
      • Setting Up Additional Configuration Requirements in a SunCluster 3.X Environment
      • Configuring Additional Requirements in a SunCluster 2.2 Environment
    • Setting Up Additional Configuration Requirements for IBM HACMP
    • Setting Up Additional Configuration Requirements for Hewlett-Packard MC/ServiceGuard
  • Troubleshooting
    • Running System Diagnostics
    • Connect:Direct Secure Plus Troubleshooting
    • Troubleshooting Sterling Connect:Direct Integrated File Agent
• IBM Sterling Connect:Direct for Microsoft Windows
  • Release Notes
    • New Features and Enhancements
    • Hardware and Software Requirements
    • Special Considerations
    • Known Restrictions
      • Restrictions for IBM Sterling Connect:Direct for Microsoft Windows
    • Installation Notes
      • Installation Notes for Connect:Direct Integrated File Agent
      • Connect:Direct Secure Plus for Microsoft Windows
    • Upgrading Guidelines
      • Upgrading Guidelines for IBM Connect:Direct for Microsoft Windows
      • Upgrading Guidelines for Related Software
  • Getting Started Guide
    • Prepare for the Installation of IBM Sterling Connect:Direct for Microsoft Windows
      • Requirements for Copying Files To and From Network Servers
      • Configure Microsoft Windows User Privileges
      • Customize a Connect:Direct Logon Account
      • Configure TCP/IP Connectivity
      • IBM Connect:Direct for Microsoft Windows Installation Worksheet
      • Install and Configure Database Software
      • Automate the Connect:Direct for Microsoft Windows Installation
    • Installing IBM Connect:Direct for Microsoft Windows
      • Installation Overview
        • IBM Connect:Direct for Microsoft Windows Installation Icons
        • Install Connect:Direct for Microsoft Windows
          • Connect:Direct Server and its Client connections
        • Install Connect:Direct Server
        • Upgrade IBM Connect:Direct for Microsoft Windows
        • Add Connect:Direct for Microsoft Windows Components
        • Repair Connect:Direct for Microsoft Windows Components
        • Remove Connect:Direct for Microsoft Windows Components
        • Uninstall Connect:Direct for Microsoft Windows
        • Add Initialization Parameters to Support Firewall Navigation
        • Firewall Configuration Example
        • IBM Sterling Control Center Director Support
          • Configuring Connect:Direct for Windows for Server and Upgrade and Restore Management
          • Configuring Connect:Direct for Windows for License Governance
          • Configuring Connect:Direct for Windows for New Install Task
    • Automate Installation
      • About Silent Installations
      • Customize Initialization Information for a Silent Installation
      • CD_SRVR.INI Parameter Values
      • Customize IBM Connect:Direct for Microsoft Windows Configuration Information
      • Run a Silent Installation
        • Suppressing an Automatic Reboot
      • Perform an Unattended Uninstallation
    • Malware or Virus Scanning Guidelines
  • Configuring the Connect:Direct Local Node
  • Accessing the Local Node Using Integrated Web services
  • About Local Functional Authorities
    • Defining User Authority
    • Modifying a User Authority Using Integrated Connect:Direct Web Services
    • Deleting a User Authority Using Integrated Connect:Direct Web Services
    • Defining a Group Authority
    • Modifying a Group Authority Using Integrated Connect:Direct Web Services
    • Sequencing Group Authorities Using Integrated Connect:Direct Web Services
    • Deleting a Group Authority
  • Define Remote User Proxies
  • Creating or Modifying a Remote User Proxy
  • Deleting a Remote User Proxy Using Integrated Connect:Direct Web Services
  • Define and Manage the Connect:Direct Network
  • About Defining the Network Map
  • Define Remote Node Information
  • Creating or Modifying a Remote Node Definition
  • Creating or Modifying Communications Mode definition
  • Deleting a Network Map Entry using Integrated Connect:Direct Web Services
  • Printing and Viewing Node and Network Map Definitions
  • View the Sample Configuration Files
  • Customizing Configuration Files
  • Adding an Encrypted Password for a User Proxy
  • Validating Configuration Files for Use with Connect:Direct
  • Applying Updated Configuration Information
  • Stopping Connect:Direct for Microsoft Windows
  • Stopping IBM Connect:Direct for Microsoft Windows Using the Services Facility
  • Stopping IBM Connect:Direct for Microsoft Windows Using the CLI
  • Stopping IBM Connect:Direct for Microsoft Windows from the Admin Tool Utility
  • About Processes
  • Establishing Preferences
  • Creating a Process
  • Commands and Statements
    • Add a Copy Statement to a Process
    • Adding a Submit Statement
    • Adding a Run Task Statement
    • Adding a Run Job Command
    • Adding an If Statement
    • Adding an Else Statement
    • Adding an Endif Statement
    • Adding or Modifying a Goto Statement
    • Add an Exit Statement
  • Process or Command Options
  • Setting Security Options
  • Setting Control Functions for a Command or Process
  • Assigning Values to Symbolic Variables
  • Specifying Accounting Data
  • Add Comments
  • Validating Process Content
  • Saving a Process
  • Copying a Process
  • Changing a Submitted Process
  • SMTP Notification
  • Manage Processes
  • Understanding the TCQ
  • TCQ Logical Queues
  • View Processes in the TCQ
  • Creating a Process Monitor
  • Monitoring Processes Based on Selection Criteria
  • The Process Monitor Output
  • Using the Output Display
  • Notification
  • Changing Process Notification
  • View Process Statistics
  • The Statistics Monitor Window
  • Delete Statistics Records
  • Control Statistics File Content
  • Creating a Statistics Report
  • Selecting Statistics Based on Process Name or Number
  • Statistics Report Output
  • Understand the Microsoft Windows Event Logging Facility
  • Control Event Log Content
  • Filter the Event Log
  • Viewing Messages
  • Manage a Connect:Direct Server
  • Starting the Admin Tool Utility
  • About the Toolbar
  • Starting and Stopping a Connect:Direct Server
  • Configuring a IBM Connect:Direct Server
  • Work with Active Directory
  • Adding an Active Directory Entry
  • Deleting an Active Directory Entry
  • Creating an Active Directory Report
  • Diagnose a Server Problem Using Traces
  • Defining a Trace
  • Stopping a Trace
  • Trace Startup Parameters
  • Recover from a Problem
  • Process Step Restart
  • Automatic Session Retry
  • Checkpoint/Restart
  • Restart During Run Task Operations
  • Troubleshoot Connect:Direct Problems
  • Network Map Communications Mode Object Worksheet
  • Network Map Communications Path Object Worksheet
  • Network Map Remote Node Object Worksheet
  • User Functional Authorization Worksheet
  • Remote User Proxy Worksheet
  • Change Connect:Direct for Microsoft Windows Settings
  • Sample Initialization Parameters Format
  • Changing Initialization Parameters
    • Miscellaneous Parameters
    • Local Node Parameters
    • Transmission Control Queue Parameters
    • Global Copy Parameters
    • Statistics Parameters
    • Install Agent Parameters
    • License Information Parameters
    • Port Check Parameters
    • New Install Task Parameters
    • Integrated File Agent Parameters
    • Integrated Web Services Parameters
  • Specify IP Addresses, Host Names, and Ports
    • IP Addresses
    • Host Names
    • Port Numbers
    • Multiple Addresses, Host Names, and Ports
    • Use Masks for IP Address Ranges
  • Submit Processes Using the CLI Command
  • Creating a Configuration File to Connect to a Server
  • Invoke the CLI
  • Terminating the CLI
  • CLI Commands
  • Command Syntax
  • Piping Conventions
  • Submit Process Command
  • Change Process Command
  • Delete Process Command
  • Select Process Command
  • Select Message Command
  • Select Statistics Command
  • Traceoff Command
  • Traceon Command
  • Help Command
  • Stop Connect:Direct
  • Translation Tables
  • Modify a Translation Table Using Integrated Connect:Direct Web Services
  • About the Client Connection Utility
  • Start the Client Connection Utility
  • Add a Node
  • Deleting a Node
  • Adding a User with Client Connection Utility
  • Deleting a User with the Client Connection Utility
  • Updating a Node or User
  • Defining a Default Node or User
  • Importing Registry Settings
  • Exporting Registry Settings
  • Printing Registry Settings
  • Use Connect:Direct in Test Mode
  • Preparing the NDMPXTBL Parameter Table
  • Sample Test Scenarios
  • Local Impersonation
    • Managing no-password proxies for Domain Accounts
      • Creating a Proxy without password for a Remote User
      • Defining User privilege to Create/Update Proxies
    • Accessing shared network drive
      • Constrained Delegation
  • Authenticating client connection
  • Implementing Client Authentication
  • Configuring Connect:Direct Windows for Authentication Management
  • Certificate Authentication for Client API Connections
  • Self-signed Certificate for Integrated File Agent
  • API Proxy
  • HSAO 2: Using Connect:Direct with IBM Aspera faspio Gateway
  • About Connect:Direct Secure Plus
    • Secure Plus Microsoft Windows Video Tutorials
  • Security Concepts
    • Transport Layer Security Protocol (TLS)
    • NIST SP800-131a and Suite B support
  • Connect:Direct Secure Plus Tools
  • Plan the Connect:Direct Secure Plus Configuration
  • Summary of Processing Using Connect:Direct Secure Plus
    • TLS Connect:Direct Secure Plus Data Exchange
  • IBM Connect:Direct Secure Plus for Microsoft Windows Documentation
  • Set Up Connect:Direct Secure Plus
  • Start Secure+ Admin Tool
  • Prepare to Set Up Connect:Direct Secure Plus
    • Populate the Connect:Direct Secure Plus Parameters File
  • Node Configuration Overview
  • Import Existing Certificates
  • Create PKCS12 Key Store
  • Configure the Connect:Direct Secure Plus .Local Node Record
  • Configure Connect:Direct Secure Plus Remote Node Record
  • Validate the Configuration
  • Enable or Disable External Authentication for a Remote Node
  • Configure External Authentication in the .SEAServer Record
  • Sample Scripts
  • Configure Secure Plus Using the Command Line Interface
    • Start and Set Up the Connect:Direct Secure Plus CLI
    • Use LCU Files to Encrypt Passwords for Use with the Connect:Direct Secure Plus CLI
    • Manage the Parameters File
    • Manage PKCS12 Keystore
    • Update the .Local Node Record
    • Manage Remote Node Records
    • Update the .Client Node Record
    • Update the .PswdExit Node Record
    • Manage the External Authentication ServerRecord
    • Maintain the .Password File (Strong Password Encryption)
  • Connect:Direct Secure Plus Node List
  • View Connect:Direct Secure Plus Parameters File Information
  • View Connect:Direct Secure Plus Node Record Change History
  • Disable Connect:Direct Secure Plus
  • Delete a Connect:Direct Secure Plus Remote Node Record
  • Resecure Connect:Direct Secure Plus Parameters and Access Files
  • View Statistics
  • Connect:Direct Secure Plus Parameters File Auditing
  • Connect:Direct Secure Plus Certificate Auditing
  • Troubleshooting
  • Local Node Security Feature Definition Worksheet
  • Remote Node Security Feature Definition Worksheet
  • Certificate File Layout
  • Validate the Configuration
  • Exchange Data and Verify Results
  • Configure Connect:Direct Secure Plus to Use the TLS Protocol
  • Configure Encrypted Passwords Using the LCU
  • Create an LCU File
  • IBM Connect:Direct for Microsoft Windows SDK Overview
  • Edit Connection Settings with the Client Connection Utility
  • Start the Client Connection Utility
  • Add and Delete Node Connection Definitions
  • Add a Node
  • Delete a Node
  • Add a User
  • Delete a User
  • Update Node Properties
  • Define a Default Node or Default User
  • Import Registry Settings
  • Export Registry Settings
  • Print Registry Settings Report
  • The C Applications Programming Interface
  • Compile and Debug
  • Activate Tracing
  • Standard C API
  • View Sample Programs
  • Compile and Debug
  • Manipulate Nodes
  • Create an Object to Connect to a Node
  • Manage Connections
  • View Information
  • Control the Return of Information
  • Execute Connect:Direct Commands
  • Manage Exception Conditions
  • Manage Administrative Functions
  • Multithreaded Access and Blocking
  • Objects On The Stack
  • Submit Process
  • Display Select Statistics Results
  • Apply Automation Servers
  • Create Virtual Servers Using the Node Factory
  • Use Automation Objects
  • User Exits
  • Apply Enhanced Security
  • Apply Automated File Opening
  • Password Exit
  • Structure Types
  • NETMAP_DESC_STRUCT Structure
  • USER_STRUCT Structure
  • MESSAGE_STRUCT Structure
  • NETMAP_MODE_SNA Structure
  • NETMAP_MODE_TCP Structure
  • NETMAP_NODE_STRUCT Structure
  • NETMAP_PATH_STRUCT Structure
  • PROCESS_STRUCT Structure
  • NODE_STRUCT Structure
  • STATISTICS_STRUCT Structure
  • TRACE_STRUCT Structure
  • TRANSLATE_STRUCT Structure
  • C++ Class and the C API Functions Return Codes
  • Sterling Connect:Direct for Microsoft Windows .Net SDK Overview
  • Sample Programs
  • Add the .Net Class Interface
  • About Classes
  • Connect to a Sterling Connect:Direct for Microsoft Windows Node
  • Disconnect Nodes
  • Submit Processes
  • Manage Processes
  • Retrieve Statistics
  • Node Properties
  • Process Class
  • Process Properties
  • Statistic Class
  • Statistic Properties
• IBM Sterling Connect:Direct for z/OS
  • Release Notes
    • New Features and Enhancements
    • Hardware and Software Requirements
    • POSIX Environment and System Libraries
    • MBCS Transfers
    • License Key File
    • Special Product Considerations
      • Other Product Considerations
      • Transmission Control Queue Considerations
      • Miscellaneous Considerations
      • UDT Special Considerations
      • IBM Connect:Direct Secure Plus Considerations
      • Connect:Direct File Agent Special Considerations
  • Upgrading IBM Connect:Direct
    • Migrating an Existing Network Map
    • Migrating existing STATS files
      • Migrate Stats data to Version 6
      • Backout or Migrate STATS data back to Previous Version
    • Using the DGA#FXAL REXX Exec
    • Migrating CICS from Prior Releases
  • Configuration Guide
    • Before you Install
      • Installation Requirements
        • VSAM Files DASD Requirement and Description
          • Authorization File (AUTH)
          • Checkpoint File (CKPT)
          • IBM Sterling Connect:Direct for z/OS Message File (MSG)
          • Network Map File (NETMAP)
          • Statistics Directory of Archive Files
          • Statistics Files
          • Transmission Control Queue (TCQ) and Index (TCX)
            • Enlarging the TCQ
          • Type File (TYPE)
          • CICS Files
      • Virtual Storage Requirements
        • Storage Requirements in a IBM Connect:Direct Plex Environment
      • Preparing TCP/IP Configuration (Optional)
        • TCP/IP Support
        • IBM Dynamic Virtual IP Address (Dynamic VIPA) Support
        • Implementing TCP Stack Affinity
        • Global TCP/IP SOURCEIP
        • Exploit z/OS Encryption Readiness Technology (zERT)
      • Security Planning
      • Planning for Parallel Sessions and Process Recovery
      • Planning the Network Map
      • Planning for Disaster Recovery Testing
      • Planning for Connect:Direct File Agent
      • Traces in Startup JCL
    • Configuring IBM Sterling Connect:Direct for z/OS
      • Define the IBM Connect:DirectVSAM Files
      • Define VTAM Resources
      • Building a Test IBM Connect:Direct Configuration (optional)
      • Building the Initialization Parameter File
      • Installing the ISPF IUI
        • Allocation Methods for IUI data sets
          • TSO Logon Procedure Allocation Example
          • Example of TSO CLIST Allocation Outside ISPF
          • Example of TSO REXX Allocation Outside ISPF
          • Example of TSO CLIST Allocation Inside ISPF
          • Example of TSO REXX Allocation Inside ISPF
        • Invoke the IUI Main Dialog (DGADISTR)
          • Invoke the IUI MSG Dialog (DGADGDSP)
        • Unallocation of IUI Data Sets
        • Using a Panel Option and Screen Prompts with Permanent Allocations to Implement the IUI
          • Invoking a CLIST Inside ISPF
          • Using a REXX EXEC Invoked Inside ISPF
        • Multiple Concurrent IUI Sessions
          • Different Release Levels used by Multiple Concurrent IUI Sessions
        • IUI Load Module Search
          • Checking for IUI ISPLLIB LIBDEF Support
          • IUI Stage 1 Exits
      • Start IBM Connect:Direct
      • Signing On to IBM Connect:Direct
        • Signing On through the IUI Interface
        • Signing On through the Operator Interface
      • Customizing the Product
    • VTAM Definitions
      • Defining APPLID of Local DTF
      • APPLID for IUI and Batch Sessions
        • Defining APPLID for Loop-Back Processing
        • Defining Logmode Table Entries
          • z/OS Nodes
          • OpenVMS and HP NonStop (Tandem) Nodes
          • i5/OS SNUF (LU0) Nodes
          • LU6.2 Nodes
          • LU6.2 SNA Services Manager
        • Cross-Domain Resource Manager Minor Nodes
        • Defining Cross-Domain Resources
        • Defining APPLIDS for Multiple DTFs
        • Defining Network or Domain Names
      • VTAM and NCP Parameters
        • Selecting RU Size for SNA Sessions
          • Understanding RU Sizing
        • Effects of NCP Parameters
          • Calculating Minimum Value of NCP TRANSFR
          • Changing the TRANSFR Parameter
      • VTAM Definitions for Full Networking IBM Connect:Direct
        • Node A Definitions
        • Node B Definitions
      • Network or Domain Name in Cross-Domain Network
        • SNA Node A
        • SNA Node B
    • Customizing the Product
      • Installing Connect:Direct File Agent
      • Customizing Connect:Direct File Agent
      • Configuring Connect:Direct File Agent
      • Backing Out the Connect:Direct File Agent Installation
      • Planning for Apsera FASP for Connect:Direct for z/OS
      • HSAO 2: Using Connect:Direct with IBM Aspera faspio Gateway
    • Customizing the Spool Transfer Feature
      • Assembling DGASVPSA
    • Customizing VPS/CDI
      • VPS.CNTL
      • VPS/CDI Interface Program
      • VPS/CDI Startup Procedure
      • Restarting VPS
      • Customizing Sample Processes
    • HP OpenView for SNMP Traps Customization
      • Importing the IBM Connect:Direct Trap Configuration File
      • Import the IBM Connect:Direct MIB
    • NetView for SNMP Customization
      • Customizing Tivoli NetView with the Tivoli Enterprise Console
      • Customizing Tivoli NetView without the Tivoli Enterprise Console
      • Disabling SNMP Traps
    • Configuring IBM Connect:Direct without SNA Support
    • Overriding IBM Sterling Connect:Direct for z/OS Default Language Environment Run-Time Options
    • IBM Connect:Direct Enqueue Resource Management
    • Initialization Errors
      • Overriding IBM Connect:Direct Initialization Parameters
      • Initialization Errors
  • CICS Administration and User Guide
    • CICS Interface
      • CICS Screen Conventions
        • System Fields
        • PF Keys
      • About the IBM Sterling Connect:Direct for z/OS CICS Documentation
    • Configuring the CICS Interface
      • Activate the CICS Component - Optional
      • Build the CICS Configuration File through ISPF
      • Load IBM Connect:Direct CICS Option into the CICS System Definition
      • Customize the CICS Interface Overview
        • Customize and Install the IBM Connect:Direct CICS Resource Definition Source
        • Modify Your CICS Startup
        • Starting the IBM Connect:Direct for z/OS CICS Interface
      • Tune the CICS Interface
        • File I/O Buffers
        • Auxiliary or Main Temporary Storage
        • Transaction Priorities and Class Assignments
    • Using the Administration System
      • The Administration Primary Menu
    • Maintaining Configuration Information
      • Configuration Categories
      • Accessing the Configuration Screen
      • Updating the Control Record
      • Updating DTF Node Records
      • Updating Network Node Records
    • Working with the Administration Interface
      • Operating the CICS Interface
        • Monitor Transaction
        • Interface Tasks
        • Interface Startup
        • Interface Subtask Management
        • Interface Request Management
        • Interface VTAM Session
    • Viewing Node Status
      • Viewing the Work Queue Screen
    • Signon Defaults
      • Accessing the Signon Defaults Screen
      • Viewing User Status
    • Operational Considerations
      • Signing On to Multiple DTFs from a Single IUI
      • Signing On to a Single DTF from Multiple IUI Facilities
      • Performing an Immediate or Uncontrolled Shutdown
      • Restarting Task ABENDS
      • Accessing Accounting and Logging Information
      • Using the Extended Submit Facility (ESF)
      • Specifying IBM Connect:Direct Signon Parameters
      • About IBM Connect:Direct CICS Data
    • Signing On and Off CICS
      • Signing On
        • Auto-Signon
        • Auto-ReSignon
        • Status Alert Screen
      • Using the Primary Menu
      • Using the SN Option for Multiple Terminal Signon
      • Updating Your Signon Defaults
      • Using the ESF Session Mode Option
      • Signing Off
    • About Copying Files
      • Generating a Copy File from Connect:Direct for CICS
      • Copying a File from Your Node to Your Node
    • Building, Modifying, and Submitting Processes through CICS
      • Submit Process Screen
      • Security Override Screen
    • Selecting a Process through CICS
      • Determining the Status of a Submitted Process
      • Viewing Summary Information
      • Viewing Process Detail
    • Selecting Statistics through CICS
      • Viewing Process Statistics
      • Viewing Statistics Summary Information
    • Displaying CICS Messages
      • Displaying Product Messages
      • Displaying the Last Message
    • Displaying Your CICS User Profile
    • CICS Messages and Problem Isolation
      • Product Messages
      • Problem Isolation
  • Administration Guide
    • Basic System Administrative
      • IBM Connect:Direct Native Command Structure
      • Managing Tasks
        • Displaying Task Status
          • Selecting a Task through the Batch Interface
          • Selecting a Task through the IUI
        • Removing Tasks from Execution
          • Removing Tasks from Execution through the Batch Interface
          • Removing Tasks from Execution through the IUI
      • IBM Connect:Direct Secure Plus Commands
        • Certificate Validity Check Used by IBM Connect:Direct Secure Plus
          • The Certificate Expiration Validation Command
        • A TLS/SSL Environment Refresh
        • IBM Connect:Direct Secure Plus Display
      • Displaying Initialization Parameter Settings
        • Using the INQUIRE INITPARM Command from the Batch Interface
        • Issuing the INQUIRE INITPARM Command through the IUI
        • Modifying Initialization Parameter Settings while IBM Connect:Direct is Running
        • Using the MODIFY INITPARMS Command from the Batch Interface
        • Issuing the MODIFY INITPARMS Command through the IUI
        • Backing up the Global and Local Initialization Parameter Files
          • Space Requirements for Using the Backup Feature
        • Manually Backing Out or Restoring
      • Displaying IBM Connect:Direct/Plex Status
        • Using the INQUIRE CDPLEX Command from the Batch Interface
        • Issuing the INQUIRE CDPLEX Command through the IUI
      • Displaying Module Maintenance History
        • Using the INQUIRE MAINT Command from the Batch Interface
        • Issuing the INQUIRE MAINT Command through the IUI
        • Using the Native Command Screen
        • Using Spool Transfer Interface
      • Stopping IBM Connect:Direct
        • Stopping IBM Connect:Direct through the Batch Interface
        • Stopping IBM Connect:Direct through the IUI
      • Suspending and Resuming Quiesce and Trace Settings
        • Suspending or Resuming Processing on a Node through the Batch Interface
        • Suspending or Resuming Processing on a Node through the IUI
        • Suspending or Resuming Processing on Nodes through the Modify Nodes Screen
        • Modify Nodes Screen
      • Global Signon Defaults
    • Implementing Security
      • User Specified Program Limitation Feature
      • Security Exits
      • SIGNON Command Sequence
        • Security during Signon Command
        • Process Execution Sequence
      • Implementing Security Exits
        • Stage 1 Signon Security Exit
        • Stage 2 Security Exit
          • Considerations for Systems with z/OS UNIX System Services
          • Sample Source Modules in the SDGASAMP Library
          • DGASECUR Parameters
          • Generating IBM RACF PassTickets
          • IBM Connect:Direct Functional Authority
          • Example Functional Authority Profiles
          • Functional Authority Validation Sequence
          • Functional Authority Privileges
          • Example 1 - Broadening Privileges for General Users
          • Example 2 - Forcing the Confirm Prompt for General Users
          • Example 3 - Defining Additional Levels of Functional Authority
          • Example 4 - Assigning Read-Only Authority to a User Authorization Level
          • Example 5 - Defining a New Administrator Level
          • Example 6 - Defining a Surrogate for User IDs with No Password
        • Run Job Security Exit
        • Run Task Security Exit
      • IBM Connect:Direct Secure Point-of-Entry
      • Trusted Node Security
        • Cross-Domain Signon Environment
        • Data Direction Restriction
      • Implementing a CA-ACF2 Environment
      • Implementing an IBM RACF Environment
        • Providing Program Access to Data Sets (PADS)
      • Implementing a CA-TOP SECRET Environment
      • Configuring Firewall Navigation
        • Firewall Navigation Rules Overview
          • Firewall Configuration Examples
        • Session Establishment
      • Troubleshooting Security Errors
    • Maintaining User Authorization
      • Authorization File
        • INSERT USER and UPDATE USER Commands
          • Inserting and Updating Users through the Batch Interface
            • Example of Adding a User Record
            • Example of Updating a User Record
          • Inserting and Updating Users through the IUI
        • Deleting Users from the Authorization File
          • Deleting Users through the Batch Interface
            • Example of Deleting a User Record
          • Deleting Users through the IUI
        • Selecting User Information from the Authorization File
          • Selecting a User through the Batch Interface
          • Selecting a User through the IUI Interface
    • Certificate-based Authentication for Client Connections
      • Configuring API certificate authentication
    • Multi-Factor Authenication(MFA) Support (API PROXY)
    • Maintaining the Type File
      • Overriding File Attributes
      • INSERT TYPE and UPDATE TYPE Commands
        • Inserting and Updating Type Files through the Batch Interface
        • Inserting and Updating Type Files through the IUI
      • DELETE TYPE Command
        • Deleting Types Files through the Batch Interface
        • Deleting Type Files through the IUI
      • SELECT TYPE Command
        • Selecting Type Records through the Batch Interface
        • Selecting Type Records through the IUI
    • Maintaining the Network Map
      • Local Node Entry
        • Local Node Positional Parameters
        • Local Node Keyword Parameters
      • When to Define the Local Node as the Adjacent Node
        • Adjacent Node Entry
        • Positional Parameters for Adjacent Node Entries
        • Keyword Parameters for Adjacent Node Entries
        • Using Alternate Communications Paths
        • PNODE=SNODE Processing
        • TCP/IP Considerations
          • TCP/IP Port Number
          • Viewing a TCP Listen Status Report
          • VTAM Independence
          • TCP/IP API Communications
          • Example - Defining a TCP/IP Default Entry
        • Channel-to-Channel Support
      • Node Usage Information Maintenance
      • Netmap Conversion and Fallback
      • API Signons
        • Adjacent Node API Signon Definition Examples
      • Examples of Local and Adjacent Node Records
        • Alternate Communications Path Examples
        • IBM Connect:Direct for z/OS Adjacent Node Examples
          • TCP/IP
          • SNA LU6.2
          • Trusted Node
          • VM/ESA SNA LU0 Adjacent Node Example
          • OpenVMS Adjacent Node Example
          • Microsoft Windows Adjacent Node Example
          • UNIX Adjacent Node Examples
          • Stratus VOS Adjacent Node Examples
          • i5/OS Adjacent Node Examples
      • How to Update the Network Map
        • Updating the Network Map while IBM Connect:Direct is Not Executing
        • Updating the Network Map while IBM Connect:Direct is Running
        • Using $$ACTION VERBS in the Network Map
        • Updating the Netmap through the Batch Interface
        • Updating the Netmap through the IUI Interface
        • $$ACTION Verb Examples
      • Viewing the Network Map
      • Target node alternate communication via Secure proxy for SSL error
    • Configuring a IBM Connect:Direct/Plex Environment
      • A New IBM Connect:Direct/Plex Environment
        • Setting Up a New IBM Connect:Direct/Plex Environment
      • Advanced IBM Connect:Direct:/Plex Configuration Considerations
        • IBM Connect:Direct/Plex System File Considerations
        • Local Node Naming Considerations
        • Strategies for Communicating with Non-Plex Servers
          • Using Alternate Communication Paths to Define the IBM Connect:Direct/Plex
          • Forcing All Processes to One IBM Connect:Direct Server
          • Define a Unique Node Name for Each IBM Connect:Direct Server
      • Converting an Existing Stand-Alone Server to a Plex Environment
        • Converting an Existing Production Server to a Plex Environment
      • Converting Two Existing Stand-Alone Server Systems to a Plex Environment
        • Converting a Standalone Server System into One IBM Connect:Direct/Plex Setup
      • Additional IBM Connect:Direct/Plex Configuration Examples
        • Configuration Examples Using One IBM Connect:Direct for z/OS System
          • Scenario 1 – External Nodes Communicate with One IBM Connect:Direct Server
          • Scenario 2 – External Nodes Communicate with Individual IBM Connect:Direct Servers
          • Scenario 3 – External Nodes Communicate with Both IBM Connect:Direct Servers
        • Configuration Example Using Two IBM Connect:Direct for z/OS Systems
      • Connect:Direct Workload Recovery
    • Configuring Extended Recovery
      • Setting Up Extended Recovery for a IBM Connect:Direct/Stand-Alone Server
      • Setting Up Extended Recovery for a IBM Connect:Direct/Plex Environment
    • Configuring Process Library support
      • Operations on Process Library support
    • Configuring Integrated File Agent Support
      • Installing File Agent
      • Configuring File Agent
      • Reinstalling File Agent
      • Starting and stopping File Agent
    • Configuring SNMP Support
      • Identifying Trap Variables
        • Type Events
        • Initialization Events
        • Shutdown Events
        • API Events
        • Execution Events
        • STATS Events
        • Miscellaneous Events
      • Setting Up SNMP
        • After SNMP Setup
        • INQUIRE SNMP Command Displays the SNMP Trap Table
        • Issuing the INQUIRE SNMP Command through the IUI
        • Using the INQUIRE SNMP Command from the Batch Interface
    • IBM Connect:Direct Exits
      • Statistics Exit
        • Sample Statistics Exits
        • Statistics Exit Calling Conventions
        • Statistics Records
      • Submit Exit
        • Sample Submit Exits
        • Submit Exit Processing Flow
        • Stage 1 Submit Exit
        • Stage 2 Submit Exit
        • Control Block Format
        • Modifiable TCQE Fields
        • Conversion of Parallel Session Values
      • ALLOCATION EXIT
        • Sample Allocation Exits
        • Restrictions and Requirements
        • How the Allocation Exit Executes
        • How to Calculate Addresses and Values
        • Copy Control Block Definitions
        • Copy Control Block Modifications
        • DDESCR Control Block Format
      • I/O Exit
        • Sample I/O Exit
        • Specifying the I/O Exit in the COPY Statement
        • Specify the I/O Exit in the TYPE File
        • I/O Exit Access to Control Blocks
        • I/O Exit Requests
        • Normal Input Calling Sequence
        • Normal Output Calling Sequence
      • Data Exit
        • Sample Data Exits
        • Data Exit Access to Control Blocks
        • Data Exit Requests
        • Normal Input Calling Sequence
        • Normal Output Calling Sequence
      • Tapemount Exit
        • Sample Tapemount Exit
      • Process Exit for Testing (DGAXPRCT)
        • Flow of the DGAXPRCT Exit
        • Setting Up and Using the DGAXPRCT Exit
          • Enable the DGAXPRCXT Exit
          • Include Required DD Statements
          • Edit the DGAXPRXCT Parameter Table
        • Sample Test Scenarios
        • Reusing the DGAXPRCT Exit
        • DGAXPRCT Output
    • Custom Messages in the Message Library
      • Message IDs
    • Customizing Submit Screens
      • Step 1 - Modify the Existing Menu DGA@SM03
      • Step 2 - Define General Purpose Process
      • Step 3 - Provide a New Submit Screen
    • Administering Statistics
      • Tools to Monitor the Statistics Facility
        • INQUIRE STATISTICS Command
        • S2 Statistics Records
        • SS Statistics Records
        • Using the DGASSTAT Utility to Determine File Usage
      • Optimizing Statistics Files
      • Change the File Pair Configuration
        • File Pair Verification
        • File Pair List Verification
      • Archiving Statistics
        • Archiving Using a Predefined Process
        • Timing the Archive
        • Using the SELECT STATISTICS Command with Archived Statistics
        • Maintaining an Archive File Directory
        • Archive-Related Utilities
        • Sample Archiving Setup
      • Displaying the Status of the Statistics Logging Facility
        • Statistics Inquiry through the Batch Interface
        • Statistics Inquiry through the IUI Interface
      • Displaying the Statistics Archive File Directory
        • Viewing the Statistics Archive Directory through the Batch Interface
        • Viewing the Statistics Archive Directory through the IUI Interface
      • Switching the Statistics File Pair
        • Initiating a Statistics File Pair Switch through the Batch Interface
        • Initiating a Statistics File Pair Switch through the IUI Interface
      • Recording Statistics for Specific Record Types
        • Excluding Statistics Logging through the Batch Interface
        • Excluding Statistics Logging through the IUI Interface
      • Notifying IBM Connect:Direct of Statistics File Archival
        • Issuing Archive Notification through the Batch Interface
        • Issuing Archive Notification through the IUI Interface
    • Managing the Transmission Control Queue
      • Configure the TCQ
      • How to Troubleshoot the TCQ
        • Using the TCQ/TCX Repair Utility (DGADTQFX)
          • Using IDCAMS ALTER
          • Regenerating the Netmap
        • DGADTQFX Examples
        • DGADTQFX Output
    • Supporting DBCS and MBCS
      • Overview of DBCS
      • Translation Tables
      • Customize Translation Tables
        • DBCS
        • END
        • NAME=[tablename | XLATE]
        • TITLE=[title name | DBCS TRANSLATION TABLE]
        • DEFAULT=nnnn
        • RULES
        • SBCS
        • Comments
        • Sample Preprocessor Input Data Stream
        • Sample JCL to EXECUTE the Preprocessor
      • Alternate Logic Applied to DBCS and SBCS Translation (LOGIC =B | (B,RC) )
      • MBCS Conversions
    • Performance Tuning
      • Analyzing TCP/IP Performance
        • General TCP/IP Problems
        • Problems Involving Executing IBM Connect:Direct Processes
      • How to Improve BSAM Data Transfer Rates
        • Troubleshooting BSAM Data Transfers
          • Problems Involving Checkpoints
      • Increasing Throughput and Decreasing CPU Utilization
        • Compression Control Feature
          • CPU Usage Examples
        • Using Extended Compression
        • zIIP Exploitation Feature
        • zIIP with SSL System Trace
        • Considerations When Using IBM Connect:Direct Secure Plus
    • Using zFBA for File Transfer
      • How zFBA works with IBM Connect:Direct
      • Special Considerations when using zFBA with IBM Connect:Direct
      • zFBA Error Handing
    • Using zEDC with IBM Connect:Direct
    • Using PDSE Version 2 with IBM Connect:Direct
      • Propagation
      • Limitations
      • Copy all member generations
    • Using PS-E Version 2 with IBM Connect:Direct
      • Propagation
      • Version of Created PS-E Data Set
      • Limitations
    • Simultaneous Session Reporting and Asset Tracking Reporting
      • SMF Record Layout
      • H2 and HW Statistic Record layout
      • Reporting
    • Isolating Problems
      • Providing Dumps to Customer Support
        • IBM Connect:Direct Data Transmission Facility (DTF) Dumps
        • IBM Connect:Direct IUI ABEND Dumps
        • DGADBATC Batch Dumps
        • DGA#CBAT Batch Dumps
        • VSAM File Dumps
        • Suppressing Dumps for Specific ABEND Codes
      • Resolving the Problem
      • Reviewing IBM Connect:Direct Messages and Sense Codes
        • Interactive Use of the IBM Connect:Direct Message Facility
          • Displaying an ABEND Message
      • Examine Output from Select Commands
        • SELECT STATISTICS Command
      • Verify File Attributes
      • Common Errors
        • Signon and IUI/API Errors
        • IBM Connect:Direct DTF Session-Establishment Errors
        • IBM Connect:Direct DTF Out-of-Storage ABENDS
        • Allocation and Open Errors
        • Transmission Errors
        • Operator Interface Errors
      • Diagnostic Tools
        • Security Traces
          • Starting a Security Trace for the First Time in the DTF
          • Turning a Security Trace On and Off in the DTF After Initial Setup
          • Starting a Security Trace in the IUI (ISPF)
        • IBM Connect:Direct Function Traces
          • Debug Settings
          • Displaying DEBUG Settings
          • Using the INQUIRE DEBUG Command from the Batch Interface
          • Issuing the INQUIRE DEBUG Command through the IUI
          • DEBUG Initialization Parameter
          • IBM Connect:Direct MODIFY Command
          • Issuing the MODIFY Command Through the Batch Interface
          • Examples of MODIFY Command through the Batch Interface
          • Issuing the MODIFY Command through the IUI
          • Examples of MODIFY Commands through the IUI
          • Modify Trace and Debug Settings Through the Modify Nodes Screen
        • IBM Connect:Direct Automatic Traces
        • DD Statements in Startup JCL
    • Global Initialization Parameters
      • ABEND.CODES.NODUMP=(ABEND code list)
      • ABEND.RUNTASK = (DUMP | ABEND.CODES.NODUMP)
      • ALLOC.CODES = (allocation errors)
      • ALLOC.MSG.LEVEL = INFO | WARN | SEVERE
      • ALLOC.RETRIES = number of retries
      • ALLOC.WAIT = hh:mm:ss
      • ALLOCATION.EXIT = modname
      • ALTCOMM.SSP = YES|NO or= Y|N
      • CDPLEX = NO | YES
      • CDPLEX.MAXSERVER = maximum number of servers | 4
      • CDPLEX.TIMER = 5 | number of minutes
      • CDPLEX.WLM.GOAL = (NO | YES)
      • CHECK.CERT.EXPIRE = NO | YES
      • CHECK.CERT.EXPIRE.TIME = 00:00:00 | HH:MM:SS
      • CHECK.CERT.EXPIRE.WARN.DAYS = 30 | nnn
      • CKPT = nK | nM
      • CKPT.DAYS = number of days
      • CKPT.MODE = (RECORD | BLOCK BLOCK | RECORD PDS | NOPDS NOPDS | PDS VSAM | NOVSAM VSAM | NOVSAM)
      • COMPRESS.EXT = ALLOW | DISALLOW
      • COMPRESS.NEGO.FAIL = STEP | PROCESS
      • COMPRESS.NETMAP.OVERRIDE = ALLOW | DISALLOW
      • COMPRESS.STD = ALLOW | DISALLOW
      • CONFIRM.COLD.START = YES | NO
      • CRC = (OFF | ON, YES, No)
      • CTCA = NO | YES
      • CTCA.TIMER = number of seconds
      • DATEFORM = (MDY | DMY | YMD | YDM)
      • DEBUG = nnnnnnnn
      • DEFAULT.PERMISS = (text_permissions | 644, binary_permissions | 755)
      • DESC.CRIT = (descriptor code)
      • DESC.NORM = (n,n,...)
      • DESC.TAPE = (n,n,...)
      • DSNTYPE = YES | NO
      • ECZ.COMPRESSION.LEVEL = 1 | n
      • ECZ.MEMORY.LEVEL = 4 | n
      • ECZ.WINDOWSIZE = 13 | nn
      • ESF.WAIT = hh:mm:ss
      • EXPDT = (TT,DD,TD,DT) (if multiple values EXPDT = TT | DD | TD | DT | ALL | NONE (if only one value)
      • EXTENDED.RECOVERY = NO | YES
      • EXTERNAL.STATS.ALLOWED = NONE|ALL|(rec_type,app_descr)|list
      • FASP = ( NO | SSP , NO | SSP)
      • FASP.FILESIZE.THRESHOLD = nnn | nK | nM | nG
      • FASP.BANDWIDTH = nnn | nK | nM | nG
      • FASP.POLICY = FAIR | FIXED | HIGH | LOW
      • FIPS = NO | YES
      • FILE.AGENT.PATH = file agent absolute directory path
      • GDGALLOC = GENERATION | DSNAME
      • GDGENQ = YES|NO
      • IMMEDIATE.SHUTDOWN = I | R | (I, nnn | 60) | (R, nnn | 60)
      • INITPARM.BACKUP = member
      • INVOKE.ALLOC.EXIT = SEND|RECV|BOTH
      • INVOKE.ALLOC.EXIT.ON.RESTART = YES|NO
      • INVOKE.SPOE.ON.SNODEID = NO|YES
      • MAX.AGE = (nnn , * | *(nnn) | ALL | ALL(nnn) | status_type | status_type (nnn) , list)
      • MAX.AGE.TOD = time
      • MAXPRIMARY = number of PNODE sessions
      • MAXPROCESS = number of executing PNODE and SNODE Processes
      • MAXRETRIES = number of retries
      • MAXSECONDARY = number of SNODE sessions
      • MAXSTGIO = maximum storage used for sequential data set transfers for system-determined NCP, maximum I/O storage for user-specified NCP)
      • MAX.TAPE = number of tape Processes | NONE | NOLIMIT
      • MAXUSERS = number of users
      • MCS.CLIST = console operator CLIST library file name
      • MCS.SIGNON = (SIGNON USERID = (user ID,password))
      • MULTI.COPY.STAT.RCD=not set | CT | MC | M2
      • NETMAP.CHECK = NO | (ALL | TCP, ALL | BOTH | NODENAME, FAIL | WARN | PASS)
      • NETMAP.CHECK.ON.CALL= YES | NO
      • NODE.QUIESCE.OFF = NODENAME
      • NODE.QUIESCE.ON = NODENAME
      • NODE.TRACE.OFF = NODENAME
      • NODE.TRACE.ON = (NODENAME,nnnnnnnn)
      • NON.SWAPABLE = YES | NO
      • PDSE.SHARING = YES | NO
      • PDSENQ = YES | NO
      • PROCESS.RETENTION = YES | NO
      • PROPAGATE.SMSCLASS = (NO|COND|YES, NO|COND|YES, NO|COND|YES)
      • PROPAGATE.SPACE = (NO|YES, NO|YES)
      • PROPAGATE.DCB=(NO|YES, NO|YES)
      • PROPAGATE.DSNTYPE = NO|YES
      • PROPAGATE.DSNTYPE.EXTENDED= EXTPREF|EXTREQ
      • PRTYDEF = Process priority
      • QUIESCE = YES | NO
      • QUIESCE.NODE = node name
      • REMOTE.DUMMY.PASSWORD = [ YES | INTERNAL ]
      • REQUEUE = YES | NO
      • RESET.ORIGIN.ON.SUBMIT = YES | NO
      • REUSE.SESSIONS = YES | NO
      • ROUTCDE.CRIT = (route code)
      • ROUTCDE.NORM = (route code)
      • ROUTCDE.TAPE = (route code)
      • RUN.JOB.EXIT = modname
      • RUNJOBID = USER | CD
      • RUN.TASK.EXIT = modname
      • RUNTASK.RESTART = YES | NO
      • S+CMD.ENFORCE.SECURE.CONNECTION = YES | NO
      • SECURE.DSN = filename
      • SECURE.SSL.PATH.PREFIX = prefix
      • SECURITY.EXIT | SECURITY = module name | (module name,DATASET|ALL,PSTKT) | (module name,DATASET|ALL) | OFF
      • SECURITY.NOTIFY = YES | NO | HOLD
      • SERVER.MSU = number|2147483647
      • SERVER.TYPE = [PROD | TEST]
      • SESSION.HIGHWATER.SMF = (133 | 128-255, 1-60) | NO
      • SNA = YES | NO
      • SNMP = YES | NO
      • SNMP.DSN = data set name | data set name (member)
      • SNMP.MANAGER.ADDR = hostname | IP address
      • SNMP.MANAGER.PORTNUM = port-number
      • SNODE.ARCH.RECALL.WAIT = NO | YES
      • STAT.ARCH.CONFIRM = YES | NO
      • STAT.BUFFER.ESDSDATA | STAT.BUFFER.KSDSINDX | STAT.BUFFER.KSDSDATA
      • STAT.ERROR = ABEND | DISABLE
      • STAT.EXCLUDE = (record type list)
      • STAT.INIT = WARM | COLD
      • STAT.QUEUE.ELEMENTS = statistics record queue size
      • STAT.SNODEID = (NO | YES,NO | YES)
      • STAT.SWITCH.SUBMIT = dsn [member]
      • STAT.SWITCH.TIME = (hh:mm:ss , ...)
      • STAT.TPREC = (start_time, end_time, snaps_per_hour)
      • STAT.USER = (user ID, [password])
      • STATISTICS.EXIT = modname | (modname[,MANAGER | SERVER | BOTH])
      • STRNO.MSG = number | 10
      • SUBMIT.EXIT = modname
      • SYSOUT = class
      • TAPE.PREMOUNT = YES | NO | LIST
      • TAPEIO = BSAM | EXCP
      • TAPEMOUNT.EXIT = modname
      • TCP = OES | NO
      • TCP.API.LISTEN = ((addr , port) , (addrn , portn))
      • TCP.API.DISCONNECT.ERROR.MESSAGE = Yes | No
      • TCP.API.TIMER = 00:00:00 | hh:mm:ss
      • TCP.CONNECT.TIMEOUT= 30 | number of seconds
      • TCP.FMH.TIMER=hh:mm:ss
      • TCP.FMH.TIMER.RETRIES=n
      • TCP.LISTEN = ((addr , port) , (addrn , portn))
      • TCP.RUNTASK.TIMER = hh:mm:ss
      • TCP.SOURCEIP = (IPv4 address or DNS | IPv6 address or DNS)
      • TCP.SRC.PORTS
      • TCP.SRC.PORTS.LIST.ITERATIONS = number of scans
      • TCP.TIMER = wait time
      • TCQ = WARM | COLD
      • TCQ.THRESHOLD = NO | YES | nn
      • THIRD.DISP.DELETE = YES | NO
      • THIRD.DISP.DELETE.X37
      • TRACE.BUFFER = nnn | 2
      • TRANS.SUBPAS = YES|NO
      • UPPER.CASE = YES|NO
      • V2.BUFSIZE = (maximum transmission buffer size, TCP/IP send/receive buffer size)
      • WTMESSAGE = NO | YES | (YES,nnn)
      • WTRETRIES = hh:mm:ss | 00:03:00
      • XCF.NAME = XCF group name
      • ZEDC = ON|OFF|PREFERRED
      • ZFBA = YES|NO
      • ZIIP = NONE | EXTCOMP | SSLTLS | ALL | PROJECT
      • IBM Connect:Direct System File Initialization Parameters
        • AUTHDSN = dsn
        • CKPTDSN = dsn
        • MSGDSN = dsn
        • NETDSN = dsn
        • STAT.ARCH.DIR = archive directory file name
        • STAT.DSN.BASE | STAT.FILE.PAIRS
        • TYPEDSN = dsn
    • Local Initialization Parameters
      • CDPLEX.INITPARM.BACKUP = member
      • CDPLEX.MANAGER = NO | YES
      • CDPLEX.MSGID = NONE | xx
      • CDPLEX.PLEXCLASSES = (*,plexclass,…,plexclass)
      • CDPLEX.REDIRECT
      • CDPLEX.REDIRECT.EXCEPTION = ((Mgr-IP, Ext_Svr-IP, Ext_Svr-port, Exception-IP, Exception-port),...)
      • CDPLEX.SERVER = IBM Connect:Direct/Server name
      • CDPLEX.SERVER.JOBDSN = data set name
      • CDPLEX.SERVER.JOBMEM = ((member name,server name),…)
      • CDPLEX.SERVER.NODE = node name
      • CDPLEX.TIMER = 5 | number of minutes
      • CDPLEX.VTAM = (VTAM-APPL,P/S-Node-APPL)
  • User Guide
    • Introduction to IBM Connect:Direct commands
      • Supported commands
      • Writing IBM Connect:Direct commands
        • Native format
        • Command example
        • Command syntax
        • Indicating case sensitivity
        • Indicating selection criteria
        • Indicating output destination
    • The batch interface
      • Batch interface job requirements
        • Processing rules
      • Sample job stream to run the batch interface
        • DDNAMES for DGADBATC
        • DGADBATC EXEC parameters
        • DGADBATC return codes with DGADCHLA
      • Using the MAXDELAY keyword parameter to synchronize submitted Processes
        • SIGNON Parm Options
        • MAXDELAY Restart
        • DGADBATC Parm Options
        • MAXDELAY Limitations and Restrictions
        • How MAXDELAY Affects PROCESS Submission
        • MAXDELAY Parm Options
    • The batch interface for PDS/PDSE copy
      • Batch interface job requirements for PDS/PDSE copy
        • Processing rules
      • Sample job stream to run the batch interface for PDS/PDSE copy
        • DDNAMES for DGA#CBAT
        • DGA#CBAT EXEC parameters
        • DGA#CBAT return codes with DGADCHLA
      • Using the MAXDELAY keyword parameter to synchronize submitted Processes for PDS/PDSE copy
        • SIGNON Parm Options
        • MAXDELAY Restart
        • DGA#CBAT Parm Options
        • MAXDELAY Limitations and Restrictions
        • How MAXDELAY Affects PROCESS Submission
        • MAXDELAY Parm Options
    • The Interactive User Interface (IUI)
      • Primary Options Menu
        • Navigating the Interactive User Interface
          • Using Branch Commands
        • Using the PF Keys
          • Browsing the IUI Display
        • Displaying Your User Authorization
        • Getting Help
      • Operator Tables
      • Messages
        • Message Example
        • Messages in a IBM Connect:Direct/Plex Environment
        • Viewing and Printing Messages Using Different Criteria
        • Viewing a Message List
        • Printing Messages
    • The Application Program Interface
      • DGADCHLA Program
        • Required Parameters for DGADCHLA
        • Extracting Return Codes
        • UICB Fields
        • DGADCHLA Return Codes
          • Extract Fields for DGADCHLA Return Codes
      • DGADCHLA Examples
      • Sample Job Stream for Executing the Program
    • Managing Sessions
      • Signing On to IBM Connect:Direct for z/OS
        • Timeout Problems
        • Using SIGNON through the IUI
          • Viewing Your Current Signon Parameters
          • Setting Up Signon Defaults
        • SIGNON Command
          • Using SIGNON through the Batch Interface
        • Signing On to the API
        • Signing On to Multiple Sessions
          • Master Session
          • Non-Master Session
          • SIGNOFF Sequence
          • Switching Nodes
          • Using the Batch Interface for Multiple Session SIGNON
          • Using the IUI Multiple Session SIGNON Command
      • Swap Node Command
        • Using SWAP NODE through the IUI
        • Using SWAP NODE through the Batch Interface
      • Sign Off Command
        • Using SIGNOFF Through the IUI
        • Using SIGNOFF through the Batch Interface
      • Sequencing the SIGNON, SWAP NODE, and SIGNOFF Commands
    • Building, Modifying, and Submitting Processes
      • Process Routing
      • Process Queuing
        • Process Selection
        • Intelligent Session Retry
        • Process Execution Example
        • Process Management in a IBM Connect:Direct/Plex
          • Example: Process Management Steps
      • SUBMIT Command
        • SUBMIT Command Examples
        • Submitting Processes through the Batch Interface
      • Submitting Processes through the IUI
        • IUI Submit Options
        • Validating Processes from the SB, DF, and CF IUI Options
      • Using the SB IUI Option to Submit a Predefined Process
      • Using the DF IUI Option to Create, Edit, and Submit Processes
        • Modifying and Submitting a Process Using the DF IUI Option
        • Creating and Submitting a New Process Using the DF IUI Option
        • Submitting a Process Using the DF IUI Option
        • Using Statement Models to Create a Process
      • Using the CF IUI Option to Generate a COPY Process
        • Generating a COPY Process
    • Controlling Processes in the TCQ
      • Controlling Processes with Commands
        • Setting Selection Criteria
      • Modifying a Process in the TCQ with CHANGE PROCESS
        • CHANGE PROCESS Command Format
        • CHANGE PROCESS Command Examples
        • Issuing CHANGE PROCESS through the Batch Interface
        • Issuing CHANGE PROCESS through the IUI
      • Suspending, Flushing, and Deleting Processes
        • SUSPEND, FLUSH, or DELETE PROCESS Command Format
        • SUSPEND, FLUSH, and DELETE Command Examples
        • Issuing the SUSPEND PROCESS, DELETE PROCESS, or FLUSH PROCESS Commands through the Batch Interface
        • Issuing the SUSPEND PROCESS, DELETE PROCESS, or FLUSH PROCESS Commands through the IUI
      • Examining Processes in the TCQ
        • SELECT PROCESS Command Format
        • SELECT PROCESS Command Example
        • Issuing SELECT PROCESS through the Batch Interface
        • Issuing SELECT PROCESS through the IUI
          • Viewing and Controlling a Process through the Operator Table
          • Accessing Execution Queue Status on the Operator Table
          • Viewing and Controlling a Process through the Selected Process Screen
          • Viewing the Content of Processes Matching Your Search Criteria
    • Process Queuing and Recovery
      • Logical Queues
        • Queuing Parameters
        • TCQ Status and State Values
          • Wait Queue
          • Execution Queue
          • Hold Queue
          • Timer Queue
      • Process Recovery
        • COPY Statement Checkpoint/Restart Facility
          • Initialization Parameters
          • Checkpoint/Restart File
          • COPY Statement Parameters
        • Checkpoint/Restart Examples for TCP/IP or LU6.2 Transfers
        • RUN TASK Checkpoint/Restart
          • RUN TASK Checkpoint Records
          • RUN TASK Restart
          • Re-execution of the RUN TASK
    • Process Results and Statistics
      • Statistics Log Records
        • Statistics Records Content
        • Elapsed Time Significance
        • InterConnect Option Records
        • External record
      • SELECT STATISTICS Command
        • SELECT STATISTICS Command Format
        • Using SELECT STATISTICS through the Batch Interface
          • SELECT STATISTICS Command Examples
          • SELECT STATISTICS Sample Output
        • Using SELECT STATISTICS through the IUI
          • Statistics Summary
          • Display Statistics
        • Using ADVANCED SELECT STATISTICS through the IUI
          • Advanced SELECT STATISTICS Display Report
          • Advanced SELECT STATISTICS sample output
      • WRITE EXSTATS Command
      • SELECT MESSAGE Command
    • The Network Map
      • Retrieving Records from the Network Map File
        • Issuing the SELECT NETMAP Command from the IUI
        • Issuing the SELECT NETMAP Command from the Batch Interface
        • SELECT NETMAP Command Format
      • Translating TCP/IP Host Names to Network Addresses
        • Issuing the SELECT TCPXLAT Command from the IUI
        • Issuing the SELECT TCPXLAT Command with the Batch Interface
        • SELECT TCPXLAT Command Format
    • Utility Programs
      • User Notification Programs
        • Operator Console Notify Program (DGADTIFY)
        • User Notify Program (DGADTFY2)
        • Dynamic Allocation Program (DGADTDYN)
          • DGADTDYN Parameters
          • DGADTDYN Sample Program Uses
        • Run Task Wait Program (DGADWAIT)
      • VSAM AMS Interface Program (DGADTAMS)
        • DGADTAMS Parameters
        • DGADTAMS Sample Program
      • Symbolic Resolution Utilities (DGADTSUB and DGADGSUB)
        • Passing Variables Using DGADGSUB
        • Using Symbolic Variables
        • IBM Connect:Direct Exits and DGADTSUB
      • Batch Compression Utility (DGASACMP)
        • DGASACMP Parameters
        • DGASACMP Examples
        • DGASACMP Output
        • Testing the Effects of Changing Values for Extended Compression Parameters
          • Automatic Decompression
      • Determine “High-Water Mark” for a Period (DGADVITL)
      • ADRDSSU Interface Program (DGADSIOX I/O Exit)
        • DGADSIOX I/O Exit Sample Processes
        • DGADSIOX I/O exit limitations and security considerations
      • DGASCONV – Secure Parameter File Conversion Utility
      • Using the TCQ/TCX Repair Utility (DGADTQFX)
      • IBM Sterling Connect:Direct FTP+ for z/OS (CDFTP)
        • Components of IBM Sterling Connect:Direct FTP+
        • Security Considerations for IBM Sterling Connect:Direct FTP+
        • Configure IBM Sterling Connect:Direct FTP+ for z/OS
          • Install IBM Sterling Connect:Direct FTP+ Plug-in
          • Create CDFTP Procedure
          • Create JCL to Start the IBM Sterling Connect:Direct FTP+ Manager
          • Update Netmap for Remote Nodes
          • Start IBM Sterling Connect:Direct FTP+ Manager
        • Modify FTP JCL
        • New $CD.SDGAPARM and $CD.SDGASAMP Members
        • Supported FTP Commands
          • Fully Supported FTP Commands
          • Partially Supported FTP Commands
          • FTP Commands Accepted, But Ignored
  • Facilities Guide
    • IBM Sterling Connect:Direct for z/OS Facilities Overview
    • ARS Report Examples
      • IBM Sterling Connect:Direct for z/OS Activity Report
      • IBM Sterling Connect:Direct for z/OS Summary Report
      • IBM Connect:Direct Exception Report
      • Security Violations Report
      • IBM Connect:Direct for z/OS Function Reports
        • IBM Sterling Connect:Direct for z/OS Non-PDS Copy Report
        • IBM Sterling Connect:Direct for z/OS PDS Copy Report
        • IBM Sterling Connect:Direct for z/OS Run Job Report
        • Run Task Report
        • IBM Sterling Connect:Direct for z/OS Submit Within a Process Report
    • Activity Reporting System
      • ARS and IBM Connect:Direct
      • Business Solutions Using ARS
    • Requesting ARS Statistical Reports
      • Requesting Reports Using ARS Screens
        • ARS Connect:Direct Requirements Screen
        • ARS SAS Requirements Screen and Fields
        • Job Streams Created
      • Running the Job
    • Requesting Multiple ARS Reports or Scheduled Processing
      • Modifying the Sample Job Stream
        • Job Stream Definitions
        • Sample IBM Connect:Direct Process That Submits Job Stream
        • Multiple Reports to an Output Data Set
    • ARS Record Layouts
      • Description of an SAS Variable
      • Authorization Event Record
      • Change Process Termination Record
      • Copy Termination Record
      • Delete Process Termination Record
      • Display Statistics Record
      • Flush/Suspend Process Termination Record
      • PDS Member Copy Record
      • Process Submit Statistics Record
      • Process Termination Record
      • Run Job Termination Record
      • Run Task Termination Record
      • Signon/Signoff Statistics Record
      • Start IBM Connect:Direct Command Record
      • Stop IBM Connect:Direct Statistics Record
      • Write to Operator (WTO) Statistics Record
    • The Operator Interface
      • Concatenation of Operator CLIST
      • Sample IBM Connect:Direct for z/OS CLISTs
      • Rules for Setting Up IBM Connect:Direct for z/OS CLISTs
      • IBM Connect:Direct for z/OS Commands
      • CLIST Examples
      • Operation Messages
      • Stopping IBM Connect:Direct
        • Stopping a IBM Connect:Direct/Plex Manager and All Servers
        • Stopping an Individual IBM Connect:Direct/Plex Server
      • About Tape Mount Messages
        • Tape Pre-mount Message
        • Tape Mount Messages
        • Setting Up IBM Connect:Direct for z/OS Tape Pre-mount Messages
        • Setting Up IBM Connect:Direct for z/OS Tape Mount Messages
        • IBM Connect:Direct for z/OS Tape Pre-mount Messages
        • IBM Connect:Direct for z/OS Tape Mount Messages
      • Tape Device Allocation
        • Terminating the Tape Mount
        • Verifying Volume Requests
        • Handling Multivolume Files
        • IBM Connect:Direct for z/OS Messages on 3480 Display
    • Event Services Support
      • ESS Concepts and Components
      • Event Services Support Architecture
      • ESS Data Flow Using CICS API
      • Deciding What Event Data to Collect
        • ESS Event Record Examples
      • Using ESS with the CICS API
      • Using ESS with the ESS User Exit
        • Using the ESS Exit
        • EVENT SERVICES CREATE Command Format
        • EVENT SERVICES START Command Format
        • EVENT SERVICES STOP Command Format
        • EVENT SERVICES DISPLAY Command Format
        • CICS ESS Customization
          • CICS API Option
          • Accessing the API Module (DGAQ012)
          • LASTSEQ Parameter
          • Event Record from the Transient Data Queue
        • Event Services Record Descriptions
          • Event Record Type Attributes
            • Event Record Types
            • Event Record Enhancements
    • Spool Transfer Facility
      • Spool Transfer Components
      • VTAM Printer Support
      • IBM Connect:Direct API
        • Process Names
        • Sample Process to Display Attributes in the SUBMIT Statement
        • DGAPGNER Job
      • Symbolic Definitions
      • Customizing VPSSCDI
    • Transferring Data to the JES Reader or Spool
      • Output to the JES Reader
      • Examples of JCL Output
      • Output to JES Spool Files
      • IBM Connect:Direct Banners
      • IBM Connect:Direct COPY Process
      • COPY TO Syntax to Support Spool Transfer
      • Symbolic Definitions for the SYSOUT Keyword
      • Sample Process for SYSOUT
  • IBM Connect:Direct Secure Plus for z/OS
    • IBM Connect:Direct Secure Plus for z/OS Overview
      • Security Concepts
      • Security Protocols
        • Transport Layer Security Protocol and Secure Sockets Layer Protocol
        • Planning for System SSL in FIPS Mode
        • Secure Protocol and Security Mode
          • SP800-131a in Transition Mode
          • SP800-131a in Strict Mode
          • NSA Suite B 128bit Mode
          • NSA Suite B 192bit Mode
          • Secure Cipher Suite
      • IBM Connect:Direct Access to System Resources for SSL or TLS
      • IBM Connect:Direct Secure Plus Tools
        • Admin Tool
          • Native ISPF User Interface
          • SPAdmin Navigations
        • IBM Connect:Direct Secure Plus Parameter File
        • Access File
        • Parameter and Access file best practices
        • Control Center
      • Prerequisites
        • Expert Security Administrator
        • IBM Connect:Direct ISPF Libraries in TSO
        • Security Requirements of Trading Partners
        • Implementation Plan for IBM Connect:Direct Secure Plus
        • Worksheets
      • IBM Connect:Direct Secure Plus for z/OS Documentation
        • Task Overview
    • Plan Your Implementation of the SSL or TLS Protocol
      • Transport Layer Security Protocol and Secure Sockets Layer Protocol
      • TLS or SSL Protocol Processing
        • IBM Connect:Direct Secure Plus Data Exchange
          • Authentication
          • Customer Data Transmission
      • Self-Signed and CA-Signed Certificates
        • Terminology and Security Applications for SSL and TLS Certificates
          • System Security Applications
        • General Requirements for Certificates
        • Application-Specific Requirements
      • Server Certificates and IBM Connect:Direct
        • Server Certificate
        • Setting Up IBM Connect:Direct to Use Certificates
    • Using the SecurePlus Admin Tool and Populating the Parameter File
      • Starting the Administration Tool
        • About the Admin Tool
        • Node-Specific Parameters
          • Security Options
          • EA Parameters
          • SSL/TLS Parameters
        • Admin Tool Navigation
        • Admin Tool Help
      • IBM Connect:Direct Secure Plus Configuration
        • Parameter File Creation
        • Node Configuration
      • Populating the Parameter File Using Quick Start
      • Manual Parameter File Creation
    • Create the Parameter File Manually for the SSL or TLS Protocol
      • Configuration Guidelines
      • Adding the Local Node Record to the Parameter File Manually for the SSL or TLS Protocol
        • Cipher Selection Rules
      • Adding a Remote Node Record to the Parameter File Manually for the SSL or TLS Protocol
    • Additional Configuration Options
      • Adding a Remote Node Record for the External Authentication Server
      • Establishing Secure TCP API Connections to a IBM Connect:Direct Secure Plus-Enabled Server
      • Implementing Strong Password Encryption
        • Disabling Strong Password Encryption
        • SPE Problem Troubleshooting
    • Configure the Local Node Record Imported from the Network Map
      • Configuration Guidelines
      • Configuring the Local Node Record for the SSL or TLS Protocol
    • Configure Remote Node Records Imported from the Network Map
      • Configuration Guidelines
      • Configuring a Remote Node Record for the SSL or TLS Protocol
      • Disabling IBM Connect:Direct Secure Plus in a Remote Node Record
      • Configuration for a Secure Connection between z/OS and OpenVMS Nodes
        • Records Settings in the z/OS Parameter File
        • Records Settings in the z/OS Remote Node Record for OpenVMS Parameter File
    • Enable and Validate IBM Connect:Direct Secure Plus Operation
      • Saving and Submitting the IBM Connect:Direct Secure Plus Parameter File
      • Preparing IBM Connect:Direct for Secure Plus Operations
      • Parameter File Saving After the Initial Setup
      • Validating and Testing Connections by Session
    • Override Settings in IBM Connect:Direct Processes
      • PROCESS Statement Overrides for IBM Connect:Direct Secure Plus Defaults
      • COPY Statement Overrides for IBM Connect:Direct Secure Plus Defaults
      • Security Settings Override Examples
        • Secure Sessions Default Override
        • Non-Secure Sessions Default Override
        • Default Cipher Suite Override
        • Cipher Suite List Override of Single Default Cipher Suite
        • Control Block and Data Encryption Default Override
    • Maintain IBM Connect:Direct Secure Plus
      • Parameter File Maintenance
        • Opening a IBM Connect:Direct Secure Plus Parameter File
        • Viewing Information about the Parameter File
        • Saving Changes to Node Records Using the Save Active Option
        • Re-securing the Parameter File and Access File
      • Node Record Maintenance
        • Disabling IBM Connect:Direct Secure Plus on an SSL or TLS Node
        • Changing the Cipher Suites
        • Cipher Filtering and Cipher Sorting
        • Cipher Help
        • Inserting a Node
        • Deleting a Remote Node Record
        • Cloning a parameter file
    • IBM Connect:Direct Secure Plus Statistics
      • SSL or TLS Statistics Record
    • Troubleshooting
    • Certificate Parameter Definitions
      • RACF Application Certificate Parameter Definitions
      • GSKKYMAN Utility Certificate Parameter Definitions
      • CA-ACF2 Application Certificate Parameter Definitions
      • CA-Top Secret Application Certificate Parameter Definitions
    • Configuration Worksheets
      • Local Node Security Feature Definition Worksheet
      • Remote Node Security Feature Definition Worksheet
      • .EASERVER Node Security Feature Definition Worksheet
      • .CLIENT Node Security Feature Definition Worksheet
  • Quick Reference Guide
    • Notational Conventions
    • IBM Connect:Direct Process Statements
      • Process Statement
      • Intrinsic Variables
      • COPY Statement
      • RUN JOB Statement
      • RUN TASK Statement
      • Run Task Utility Programs and Parameters
      • SUBMIT Statement
      • SYMBOL Statement
      • Modal Statements
    • IBM Connect:Direct Commands
      • Modify Command
      • Network Map Commands
      • Process Commands
      • Signon, Signoff, Stop, and Swap Commands
      • Task Commands
      • Type Commands
      • User Commands
      • Inquire Commands
      • Statistics Commands
      • WRITE EXSTATS Commands
      • Submit Command
    • Network Map Parameters
    • Initialization Parameter Overview
      • Global Initialization Parameters
      • System File Initialization Parameters
      • Local Initialization Parameters
    • Status Codes
    • Trace Types
  • Connect:Direct for z/OS EAV Support
    • EATTR parameter
    • COPY statement support
    • VIEW PROCESS support
    • TYPE file support
    • DGADTDYN support
    • z/OS operating system support of EAV
• IBM Sterling Connect:Direct Web Services
  • Release Notes
    • New Features and Enhancements
    • Minimum Hardware and Software Requirements
    • Browser Compatibility
    • Known Limitations and Restrictions
    • Security Considerations
  • Planning
    • About IBM Connect:Direct Web Service
      • Web Console Interface
      • RESTful API Interface
      • Web Console Getting Started Videos
  • Installing
    • Installing on UNIX
      • Directory Structure
    • Installing on Windows
      • Directory Structure
    • Installing on AIX
    • Installing on zLinux
    • Deploying IBM Connect:Direct Web Service Container
      • Planning
        • Verifying System Requirements
        • Installing OpenShift Container platform
        • Brief about IBM Sterling Connect:Direct Web Services Container
        • Application license requirements
        • IBM Licensing and Metering Service
        • Certificates files for Web Services
        • Hardening RedHat OpenShift Cluster
        • Encrypting etcd Data
      • Installing
        • Setting up your registry server
        • Setting up Namespace or project
        • Installing and configuring IBM Licensing and Metering service
        • Downloading IBM Sterling Connect:Direct Web Services Container
          • Online Cluster
          • Offline (Airgap) Cluster
            • Prerequisites
            • Prepare a host
            • Set Environment Variables and Download CASE Files
        • Applying Pod Security Standard for Kubernetes Cluster
        • SecurityContextConstraints (SCC) for IBM Sterling Connect:Direct Web Services Container
        • Creating storage for Data Persistence
        • Creating secret
        • Configuring- Understanding values.yaml
        • Installing IBM Connect:Direct Web Services using Helm chart
        • Validating the Installation
      • Post-installation tasks
      • Upgrade, Rollback and Uninstall
        • Upgrade – Upgrading a Release
        • Rollback – Recovering on Failure
        • Uninstall – Deleting a Release
      • Known Limitations
      • Configure AWS CloudWatch for Rendering Container Logs (EKS)
      • Migrating to IBM Sterling Connect:Direct Web Services Container
    • Silent Install and Silent Upgrade for Connect:Direct Web Services
      • Connect:Direct Web Services Silent Install and Silent Upgrade Example
  • Post Installation
    • Logging in
      • Accessing Web Console
      • Accessing RESTful API interface
      • Password Reset for a Web Administrator
  • Configuring
    • Definition Configuration with the IBM Connect:Direct Web Service UI
    • Administration Configuration
      • Types of Connect:Direct Nodes Managed via Connect:Direct Web Services
      • CDWS Admin Login
      • Managing IBM IBM Connect:Direct Web Service User Credentials
      • Managing Connect:Direct Nodes
        • Adding a Connect:Direct Node
        • View, Edit or Delete Connect:Direct Node Details
      • Managing Certificates
        • Configuring Keystore/Truststore
          • Changing Keystore/Truststore using a CLI procedure
          • Changing Key Store/Truststore using Web Console
          • Add/Import a certificate(s) to IBM Connect:Direct Web Service Keystore/Trust Store
          • Adding a new Keystore and Key Certificate
          • Sample Use Case: Adding a PEM Certificate with key into IBM Connect:Direct Web Service Keystore
        • Certificate Signing Requests (CSR)
          • Create a Certificate Signing Request
        • Adding Certificate
          • Adding Self-signed Certificate (Browser Certificate Warnings)
          • Adding CA-signed Certificate (Browser Certificate Warnings)
      • Configuring Configuration Files and IdP Profiles
        • Configuration Files
          • Configuring .hiddenFile
          • Configuring application.properties
          • Configuring Connect:Direct Web Services Logs using log4j2.yaml
            • Configuring Logs
        • Configuration IdP Profile
          • Configuring IdP Login for Stand-alone Connect:Direct Web Services
          • Configuring IdP Login for Integrated Connect:Direct Web Services
          • Client Configuration Requirements for IdP Integration
      • Certificate-based Authentication
        • Configuring Certificate based Authentication
      • Audit Logs
      • Establishing a Secure Connection between IBM Connect:Direct and IBM Connect:Direct Web Service
    • User Configuration
      • C:D User Login
      • Managing Partners
      • Statistics
      • Managing File Transfers
        • Build a Transfer
        • Modify an Existing Transfer
        • Submit Transfer
        • Transfer File
      • Managing Process Library
        • Add New Process
      • Managing Users
        • Use Authority
        • Use Proxy
        • API Proxy
      • Managing Initialization Parameters
      • Managing Secure +
        • Local Records
        • Certificates
        • Secure Partners
      • Managing Translation Tables
      • Managing File Agent
        • Basic Configurations
        • Monitoring Rules
        • Watch Directories
      • Tracing Configuration of Connect:Direct Nodes
        • Tracing in Connect:Direct for Unix
        • Tracing in Connect:Direct for Microsoft Windows
        • Tracing in Connect:Direct for z/OS
  • Using RESTful APIs with IBM Connect:Direct
    • Getting Started
    • Using REST Client to validate RESTful APIs
      • Sign On
      • Example 1: Submit a Process using REST API
      • Example 2: Select Statistics for a Process using REST API
      • Sign Out
    • Using Browser Interface to validate RESTful APIs
    • Using command line (cURL) to validate RESTful APIs
      • SignOn
      • Example 1: Submit a Process using cURL
      • Example 2: Select Statistics for a Process using cURL
      • Sign Out
    • Sample Scripts to invoke RESTful APIs
    • Supported RESTful APIs and methods matrix
    • REST API request headers
    • REST API response headers
    • REST API HTTP Response Codes
    • Admin APIs
      • Admin Password API
      • Admin Nodes REST APIs
        • GET all Admin Node Details
        • POST Add Admin Nodes
        • PUT Update Admin Node Details
        • Delete Admin Node Details
      • Key Certificates Rest API
        • GET all Key Certificates
        • GET Keystore Path
        • POST Add Key Certificates
        • DELETE Key Certificate
      • Trusted Certificates Rest API
        • GET Trusted Certificates
        • GET Truststore Path
        • POST Add Trusted Certificates
        • DELETE Trusted Certificates
      • Admin Configuration Rest API
        • GET File Lists
        • GET File Data
        • POST Update File Data
        • PUT Update Application Property File API
        • PUT Update Log4j File Data API
        • PUT Update Hidden File Data API
      • IdP Configurations
        • GET IdP Configuration
        • POST IdP Configuration
        • PUT IdP Configuration
        • DELETE IdP Configuration
      • Audit Logs REST API
        • GET Audit Logs
      • Sign-out Rest API from Admin Function
      • Built In Copy REST API
        • PUT Built In Copy
      • Certificate Signing Request REST API
        • GET Certificate Signing Request
        • POST Create Certificate Signing Request and Private Key
        • POST Download Certificate Signing Request
    • User Functions APIs
      • Statistics Rest API
        • GET statistical data for a file transfer process
        • PUT Refresh Statistical Data for a File Transfer Process
      • Process Control (File Transfer) Rest API
        • GET Process Control Rest API
        • POST Submit Process API
        • PUT Update Process API
        • PUT Suspend Process API
        • DELETE Process API
      • Sign-out Rest API from User Function
      • Init Parms Rest API
        • GET Int Parm
        • PUT Update Process API
        • PUT JSON Update Process API
        • PUT JSON fileoexit Update Process API
        • DELETE JSON Process API
      • Tracing Rest API
        • GET Trace Setting
        • PUT Update Trace settings API
        • PUT Trace On/Off
      • File Agent Rule Rest API
        • GET File Agent Rule
        • POST Import File Agent Rule Request Details
        • PUT Edit File Agent Rule
        • PUT Add File Agent Rule
        • DELETE File Agent Rule
        • GET File Agent Rule On Matching Criteria
        • PUT Change Priority of Existing Rule
      • File Agent Configuration
        • GET File Agent Configuration
        • POST Import File Agent Configuration
        • POST Export File Agent Configuration
        • PUT Edit File Agent Configuration
        • PUT Discard File Agent Configuration
        • PUT Apply File Agent Configuration
        • GET Status of File Agent Configuration
      • Watch Directory REST API
        • GET Watch Directory List
        • PUT Edit Watch Directory
        • POST Add Watch Directory
        • DELETE Watch Directory
        • PUT Import Watch Directory
        • GET Export Watch Directory
      • Netmap Nodes Rest API
        • GET Netmap Node Details
        • POST Add Netmap Nodes
        • PUT Update Netmap Node Details
        • DELETE Netmap Node
        • GET Export Partner
        • POST Import Partner
        • PUT Refresh Partner
      • Netmap Nodes Description Rest API
        • GET Netmap Node Description
        • PUT Update netmap node description
      • Secure Plus Nodes Rest API
        • GET All Secure Plus Node Details
        • POST Add Secure Plus Node
        • PUT Update Secure Plus Node
        • DELETE Secure Plus node
        • PUT Refresh Secure Plus Node
      • Process Library Rest API
        • GET Process File API
        • POST Add Process File API
        • PUT Edit Process File API
        • PUT Rename Process File API
        • DELETE Process File API
        • GET List Process Files API
      • Translation Table Rest API
        • GET Translation Table API
        • PUT Update Translation Table API
      • Stop Node Rest API
        • PUT Stop Node API
      • Secure Plus Key Rest API
        • GET Key Certificates
        • POST Add Key Certificates
        • PUT Update Key Certificates
        • DELETE Key Certificates
      • Secure Plus Trusted Key Rest API
        • GET Trusted Certificates
        • POST Add Trusted Certificates
        • PUT Update Trusted certificates
        • DELETE Trusted Key Certificates
      • Secure Plus Cipher Rest API
        • GET Cipher Suites
      • Message Lookup REST API
        • GET Description of Specific Message ID
      • Group Authority REST API
        • GET Group Authority
      • User Proxy REST API
        • GET User Proxy
        • POST Add User Proxy
        • PUT Update User Proxy
        • DELETE User Proxy
      • z/OS Native Command REST API
        • POST Execute Native Commands
      • Netmap Modes REST API
        • GET Netmap Mode
        • POST Netmap Mode
        • PUT Netmap Mode
        • DELETE Netmap Node
      • User Authority REST API
        • POST User Authority
        • PUT User Authority
        • GET User Authority
        • DELETE User Authority
      • KQV Mapping REST API
        • GET KQV Mappings
      • Version REST API
        • GET Version of Application
      • Netmap Path REST API
        • GET Netmap Path
        • PUT Change Netmap Path
        • POST Add Netmap Path
        • DELETE Netmap Path
      • Secure Plus Param
        • PUT Update Parmfile
  • Upgrading
    • Upgrading Guidelines
    • Upgrade Guidelines
    • Upgrading Web Services on Windows
    • Upgrading Web Services on UNIX
    • Upgrading Web Services on AIX
    • Upgrading Web Services on zLinux
    • Silent Upgrade for Connect:Direct Web Services
      • Connect:Direct Web Services Silent Install and Silent Upgrade Example
  • Uninstalling
    • Uninstalling on Windows
    • Uninstalling on UNIX
    • Uninstalling on AIX
    • Uninstalling on zLinux
  • Connect:Direct Web Services Troubleshooting
• What's New
  • Known Restrictions
• Sterling Connect:Direct Integrated File Agent Overview
• Configuring Sterling Connect:Direct Integrated File Agent
• How to Run Sterling Connect:Direct Integrated File Agent
• Sterling Connect:Direct Integrated File Agent Monitoring
• Sterling Connect:Direct Integrated File Agent Configuration Planning
• Tips for Using Sterling Connect:Direct Integrated File Agent
• Converting a Standalone File Agent configuration file to an Integrated File Agent configuration file
• Configure General Settings
• Configure Monitoring through Sterling Control Center
  • SNMP Trap Information
  • Error Reporting
• Watch Directories
• Rules
• Evaluating Rules
• Prioritizing Rules
• General Parameters
• Match Criteria
  • Match Operators
  • Process Information
• Sterling Connect:Direct Integrated File Agent Variables
  • Microsoft Windows/UNIX Example
  • z/OS Examples
• Logging
• Considerations for a Large Number of Watch Directories
  • Modifying the Maximum Size of a Single Log File
  • Modifying the number of Log files
• Considerations for a Large Number of Files in a Watch Directory
• Considerations for Watch Directory Scans
• Troubleshooting Sterling Connect:Direct Integrated File Agent
• Object Stores support
• Configure Integrated File Agent (IFA) for Certificate-based Authentication in Connect:Direct
  • Configure Integrated File Agent for Certificate-based Authentication
  • Configure Secure+ for Certificate-base Authentication
• Managed File Transfer enterprise deployment solution
• Enterprise deployment overview
  • Requirements for enterprise deployment
• Steps for planning an enterprise deployment
  • Identify the target systems
  • Create deployment groups for enterprise deployment
  • Security overview
  • Create an installation package for each group
  • Test each package
  • Deploy each group package
• Use the Connect:Direct silent installation for enterprise deployment
  • Connect:Direct for UNIX silent installation
    • Sterling Connect:Direct for UNIX silent installation options file and command-line parameters
    • cdinstall_a script operation
    • Basic installation and configuration
    • Installing Connect:Direct for UNIX
    • Upgrading or applying a fix pack to Connect:Direct for UNIX
    • Uninstalling Connect:Direct for UNIX
    • Complete installation and configuration
    • Installing Connect:Direct for UNIX with optional files
    • Upgrading or applying a fix pack to Connect:Direct for UNIX with optional files
    • Configuring and monitoring Connect:Direct for UNIX with Control Center
  • Connect:Direct for Microsoft Windows silent installation
    • Sterling Connect:Direct for Microsoft Windows deployment options
    • Installation executable silent operation
    • Installing Connect:Direct for Microsoft Windows
    • Upgrading Connect:Direct for Microsoft Windows
    • Applying a fix pack to Connect:Direct for Microsoft Windows
    • Uninstalling Connect:Direct for Microsoft Windows
    • Configuring and monitoring Connect:Direct for Microsoft Windows with Control Center
• Tivoli Endpoint Manager overview
  • Getting Started with the CreateTEMTasks utility
  • CTTU data file
  • CTTU properties file
  • CTTU tasks file
    • Connect:Direct for UNIX tasks file
    • Connect:Direct for Microsoft Windows tasks file
  • Sample tasks file
  • Running the CTTU
  • Running the TEM tasks
• Connect:Direct for UNIX deployment messages
• Configure new nodes in Control Center
  • Importing certificates
  • Creating server node entries
• Troubleshooting
• Understanding Sterling Connect:Direct Processes
  • What is a IBM Connect:Direct Process?
    • Process Language
    • Process Components
    • Concept of Nodes
    • How Do Processes Work?
    • How to Build Processes
  • Build IBM Connect:Direct Processes With the Process Builder
  • Signing on to the Connect:Direct Browser User Interface
  • Creating a Process Statement
    • Setting Options to Control When a Process Executes and Notification
    • Setting Process Security Options
    • Supplying Accounting Data
    • Defining Symbolic Variables
  • Creating a Copy Statement
    • Specifying Copy From Options
    • Specifying Copy To Options
  • Creating a Run Task Statement
  • Creating a Run Job Statement
  • Creating Conditional Statements
  • Creating a Submit Statement
  • Validating Process Syntax
  • Saving and Submitting a Process
  • Viewing a Process in Text Format
  • Editing a Process
  • Create Processes with a Text Editor
  • Creating a Process That Executes at the Same Time Every Day
  • Creating a Process That Copies a File
  • Create Processes with IBM Connect:Direct Requester
  • Creating a Process Statement
    • Identifying When to Run a Process
    • Placing the Process in the Hold or Retain Queue
    • Notifying a User when a Process Runs
    • Specifying User IDs and Passwords for PNODE and SNODE
  • Adding a Copy Statement
  • Adding Conditional Statements
  • Adding a Run Task Statement
  • Validating Process Content
  • Saving a Process
  • Editing a Process
  • Process Language Syntax
  • Punctuation
  • Comments
  • Concatenation
  • HFS File Name Considerations
  • Special Character Strings
  • Symbolic Substitution
    • Intrinsic Symbolic Variables Used in Connect:Direct for z/OS and Microsoft Windows
  • Termination
  • SYSOPTS Syntax
• Connect:Direct for HP NonStop Process Statement
• Connect:Direct for HP NonStop Copy Statement for Spooler Jobs
• Connect:Direct for HP NonStop Copy Statement for Guardian Disk and Tape Files
• Connect:Direct for HP NonStop Copy Statement for OSS Disk and Tape Files
• Connect:Direct for HP NonStop Run Job Statement
• Connect:Direct for HP NonStop Run Task Statement
• Connect:Direct for HP NonStop Submit Statement
• Connect:Direct for HP NonStop Conditional Statements
• Connect:Direct for HP NonStop Symbol Statement
• Connect:Direct for HP NonStop Process Parameters
• Connect:Direct for i5/OS Process Statements
• Connect:Direct for i5/OS Copy Files Statement
• Connect:Direct for i5/OS Copy Members Statement
• Connect:Direct for i5/OS Copy Objects Statement
• Connect:Direct for i5/OS Copy Spooled Files Statement
• Connect:Direct for i5/OS File Support
• Member Name Length in Connect:Direct for i5/OS Copy to z/OS
• Connect:Direct for i5/OS Run Job Statement
• Connect:Direct for i5/OS Run Task Statement
• Connect:Direct for i5/OS Process Parameters
• Connect:Direct for Microsoft Windows Process Statement
• Connect:Direct for Microsoft Windows Copy Statement
• Connect:Direct for Microsoft Windows Run Job Statement
• Connect:Direct for Microsoft Windows Run Task Statement
• Connect:Direct for Microsoft Windows Submit Statement
• Connect:Direct for Microsoft Windows Conditional Statements
• Connect:Direct for Microsoft Windows Pend Statement
• Connect:Direct for Microsoft Windows Process Parameters
• Connect:Direct for OpenVMS Process Statement
• Connect:Direct for OpenVMS Copy Statement
  • Copying from an OpenVMS Node to a z/OS Node
• Connect:Direct for OpenVMS Run Job Statement
• Connect:Direct for OpenVMS Run Task Statement
• Connect:Direct for OpenVMS Submit Statement
• Connect:Direct for OpenVMS Conditional Statements
• Connect:Direct for OpenVMS Symbol Statement
• Connect:Direct for OpenVMS Process Parameters
• Connect:Direct for UNIX Process Statement
• Connect:Direct for UNIX Copy Statement
• Connect:Direct for UNIX Run Job Statement
• Connect:Direct for UNIX Run Task Statement
• Connect:Direct for UNIX Submit Statement
• Connect:Direct for UNIX Conditional Statements
• Connect:Direct for UNIX Pend Statement
• IBM Connect:Direct for UNIX Process Parameters
• Connect:Direct for VM/ESA Process Statement
• Connect:Direct for VM/ESA Copy Statement
• Connect:Direct for VM/ESA Run Job Statement
• Connect:Direct for VM/ESA Run Task Statement
• Connect:Direct for VM/ESA Submit Statement
• Connect:Direct for VM/ESA Conditional Statements
• Connect:Direct for VM/ESA Symbol Statement
• Connect:Direct for VM/ESA Process Parameters
• Connect:Direct for VSE Process Statement
• Connect:Direct for VSE Copy Statement
• Connect:Direct for VSE Run Job Statement
• Connect:Direct for VSE Run Task Statement
• Connect:Direct for VSE Submit Statement
• Connect:Direct for VSE/ESA Conditional Statements
• Connect:Direct for VSE Symbol Statement
• Connect:Direct for VSE/ESA Process Parameters
• Connect:Direct for z/OS Process Statement
• Connect:Direct for z/OS Copy Statement
• PDS Support
• VSAM Support
• SMS Support
  • SMS-Specific Parameters
  • SMS Propagation
• GDG Support
• MBCS Support
• Connect:Direct for z/OS Run Job Statement
• Connect:Direct for z/OS Run Task Statement
• Connect:Direct for z/OS Submit Statement
• Connect:Direct for z/OS Conditional Statements
• Connect:Direct for z/OS Symbol Statement
• Creating Processes from z/OS Statement Models
• Connect:Direct for z/OS Process Parameters
• Sterling B2B Integrator - Connect:Direct Server Interoperability
  • Transmit Files between IBM Connect:Direct and B2B Integrator
    • COPY Statement Keywords for Communicating with B2B Integrator
    • Send to a B2B Integrator Mailbox
    • Send to a B2B Integrator Business Process
    • Retrieve from a B2B Integrator Business Process
    • Retrieve from a B2B Integrator Mailbox
    • Specify File Formats using SYSOPTS
    • Submit a B2B Integrator Business Process from IBM Connect:Direct
  • IBM Connect:Direct Parameters for Communicating with B2B Integrator
  • B2B Integrator Connect:Direct Server Adapter Examples
  • Copy a File from Connect:Direct for z/OS to a B2B Integrator Mailbox
  • Copy a File from Connect:Direct for UNIX to a B2B Integrator Mailbox
  • Copy a File from Connect:Direct for Microsoft Windows to a B2B Integrator Mailbox
  • Copy a File from Connect:Direct for HP NonStop to a B2B Integrator Mailbox
  • Copy a File from Connect:Direct for i5/OS to a B2B Integrator Mailbox
  • Copy a File from Connect:Direct for z/OS to a B2B Integrator Business Process
  • Copy a File from Connect:Direct for UNIX to a B2B Integrator Business Process
  • Copy a File from Connect:Direct for Microsoft Windows to a B2B Integrator Business Process
  • Copy a File from Connect:Direct for HP NonStop to a B2B Integrator Business Process
  • Copy a File from Connect:Direct for i5/OS to a B2B Integrator Business Process
  • Retrieve a File from a B2B Integrator Business Process to Connect:Direct for z/OS
  • Retrieve a File from a B2B Integrator Business Process to Connect:Direct for Microsoft Windows
  • Retrieve a File from a B2B Integrator Business Process to Connect:Direct for UNIX
  • Retrieve a File from a B2B Integrator Business Process to Connect:Direct for HP NonStop
  • Retrieve a File from a B2B Integrator Business Process to Connect:Direct for i5/OS
  • Retrieve a File from a B2B Integrator Mailbox to Connect:Direct for z/OS
  • Retrieve a File from a B2B Integrator Mailbox to Connect:Direct for Microsoft Windows
  • Retrieve a File from a B2B Integrator Mailbox to Connect:Direct for UNIX
  • Retrieve a File from a B2B Integrator Mailbox to Connect:Direct for HP NonStop
  • Retrieve a File from a B2B Integrator Mailbox to Connect:Direct for i5/OS
  • Submit a B2B Integrator Business Process from Connect:Direct for z/OS
  • Submit a B2B Integrator Business Process from Connect:Direct for UNIX
  • Submit a B2B Integrator Business Process from Connect:Direct for Microsoft Windows
  • Submit a B2B Integrator Business Process from Connect:Direct for HP NonStop
  • Submit a B2B Integrator Business Process from Connect:Direct for i5/OS
• Example Processes
  • PROCESS Statement Examples
    • Detailed PROCESS Statement Using the RETAIN Parameter
    • Detailed PROCESS Statement Using the NOTIFY Parameter
    • Detailed PROCESS Statement Using Long Passphrases
    • Use %PNODE
    • Specify a List of Ciphers in a Particular Process
    • Encrypt Only Control Block Information—No Data Being Sent
    • Use %DD2DSN to Pass DSN from JCL to a Process
    • Use a TCP/IP Address for the SNODE Keyword (IPv4)
    • Use a TCP/IP Address for the SNODE Keyword (IPv6)
    • Use TCPNAME to Identify the PNODE/SNODE Sites
    • HP NonStop PROCESS Statement
    • Example OpenVMS PROCESS Statement
    • Example VMESA Process
    • VSE PROCESS Statement
    • Use Symbolics in a UNIX Process
  • COPY Statement Examples
    • HP NonStop
      • Copy a File from Connect:Direct for HP NonStop to Connect:Direct for z/OS
      • Submit a Process from a Connect:Direct for HP NonStop Node that Copies a File from z/OS to HP NonStop
      • Copy a Code 0 Unstructured file from HP NonStop to z/OS
      • Copy a File from HP NonStop to z/OS After Running DMRTDYN on z/OS
      • Copy a File from an HP NonStop Spooler to a z/OS Node
      • Copy Between a z/OS Node and a Remote HP NonStop Spooler on an EXPAND Network
      • Copy Files Between the HP NonStop Spooler System and a z/OS Node Using Job Number
      • Copy a Disk File from HP NonStop to a Tape Device at z/OS
      • Copy a Tape File from z/OS to a Disk File on HP NonStop
      • Copy a File from z/OS to HP NonStop Using the FASTLOAD Option
      • Allocate a VSAM Data Set and Copying a File from HP NonStop to z/OS
      • Copy to an Entry-Sequenced File (HP NonStop to HP NonStop)
      • Copy Files Between HP NonStop Spooler Systems
      • Copy Text Files from HP NonStop to UNIX
      • Copy Binary Files from HP NonStop to UNIX
      • Copy Binary Files from HP NonStop (OSS) to UNIX
      • Copy Files from HP NonStop to VM
      • Copy an HP NonStop Key-Sequenced File to a Connect:Direct for OpenVMS Node
      • Copy Files from HP NonStop to VSE
      • Copy Binary Files from Microsoft Windows to HP NonStop (OSS)
      • Copy a File from HP NonStop to VM
      • Copy a Data Set from a Spooler File on IBM Connect:Direct HP NonStop to IBM Connect:Direct z/OS
      • Copy a File From HP NonStop to HP NonStop and Overriding SENDOPENFILE with OPENFILEXMT
    • i5/OS
      • Copy an HP NonStop File to an i5/OS Node
    • Microsoft Windows
      • Copy a File from Microsoft Windows to z/OS
      • Copy a File from Microsoft Windows to HP NonStop
      • Wildcard Copies from Microsoft Windows to UNIX
      • Wildcard Copy from Microsoft Windows to Microsoft Windows
      • Wildcard Copy from Microsoft Windows to a z/OS Node
      • Wildcard Copy from Microsoft Windows to a Node with Download Restrictions
      • Copy a File from Microsoft Windows to z/OS
      • Use Symbolics In a Microsoft Windows Copy
      • CODEPAGE Conversion During a File Copy (Microsoft Windows to z/OS)
    • OpenVMS
      • Copy PDS Members from z/OS to OpenVMS
      • Copy a File from Disk to Tape (OpenVMS)
      • Copy a File from Tape to Disk (OpenVMS)
      • Copy from z/OS to OpenVMS and Specifying a User-Defined Translation Table
      • Copy a Single Entry from the OpenVMS Text Library to a z/OS Member
      • Copy All Entries from an OpenVMS Text Library to z/OS
      • Copy a Data Set from a z/OS Node to an Executable File on an OpenVMS Node
      • Copy an Executable File from an OpenVMS Node to a z/OS Node
      • Copy a Text File from OpenVMS to Microsoft Windows and Back to OpenVMS
      • Copy between the z/OS and OpenVMS Platforms
      • Copy and Compare Files on OpenVMS
      • Copy HFS and Text Files Back and Forth Between z/OS and OpenVMS
      • Copy a Text File from OpenVMS to UNIX and Back to OpenVMS
      • Copy a FB Text File to a z/OS PDS File and Pull Back to OpenVMS
      • Copy a Binary File from OpenVMS to Microsoft Windows and Back
      • Copy a Binary File from OpenVMS to UNIX and Back
      • Copy an OpenVMS Key-Sequenced File to an HP NonStop Node
      • Copy an OpenVMS File from Disk to Tape
      • Copy an OpenVMS File from Tape to Disk
      • Use Symbolics in an OpenVMS COPY Statement
      • Copy an OpenVMS Sequential File to a Text Library
      • Copy a File from OpenVMS to z/OS and Back to OpenVMS
    • UNIX
      • Copy Files Between UNIX and z/OS
      • Copy Files and Using sysopts (UNIX to UNIX)
      • Copy Files and Use the Checkpointing Feature (UNIX to UNIX)
      • Copy Files and Use the Compression Feature (UNIX to UNIX)
      • Archive Files Using the Connect:Direct for UNIX Pipe I/O Function
      • Restore Files Using the Connect:Direct for UNIX Pipe I/O Function
      • Archive and Restore Files in a Single Step Using the Connect:Direct for UNIX Pipe I/O Function
      • Copy Files from UNIX to a Member on i5/OS
      • Copy Files from UNIX to a Spool File on i5/OS
      • Copy Save Files from i5/OS to UNIX
      • Copy Save Files from UNIX to i5/OS
      • Copy Executables from UNIX to i5/OS
      • Copy a File from UNIX to Microsoft Windows
      • Copy a File from a UNIX Node to a z/OS Node
      • Wildcard Copies from UNIX to Microsoft Windows
      • Wildcard Copy from UNIX to UNIX
      • Wildcard Copy from UNIX to a z/OS Node
      • Wildcard Copy from UNIX to a Node with Download Restrictions
    • VM/ESA
      • Copy a VSAM File from VM to an Entry-Sequenced HP NonStop File
      • Copy a VSAM File from VM to a Key-Sequenced HP NonStop File
      • Copy a VM File to VM Spool
      • Copy an Entire VM Minidisk
      • Copy from VM Disk to Tape
      • VM to VM Group File Copy
      • Copy VM files to a Shared File System (SFS)
      • Extract an SFS File and Placing the File on the VM Reader Spool
      • Copy Files from VM to OpenVMS
      • Copy a VM Sequential File to a CA-DYNAM/T Tape File (VSE)
      • Copy VM Sequential Files to CA-DYNAM/D Files (VSE)
      • Copy Files from VM to i5/OS
      • Copy VSAM Files from VM to i5/OS
      • VM-Initiated Copy from i5/OS to VM
      • VM-Initiated Copy VM to i5/OS Spool
      • VM-Initiated Copy from i5/OS to VM Spool
      • Copy a VM VSAM file to z/OS
      • Copy a VM CMS Disk File to a z/OS Node
      • Copy a VM CMS Sequential File to UNIX
      • Copy a CMS Sequential File from VM to Microsoft Windows
      • Copy a VM CMS File to Microsoft Windows
      • Copy a DBCS File from Microsoft Windows to VMESA Using the KSCXEBC Translation Table
      • Copy a DBCS File from VMESA to Microsoft Windows Using the EBCXKSC Translation Table
      • Copy a DBCS File From UNIX to VMESA Using the EBCXKSC Translation Table
      • Copy a DBCS File From VMESA to UNIX Using the KSCXEBC Translation Table
      • Copy a Non-VSAM File on VMESA
      • Copy All Files In a Group to a Destination with Fn Ft Unchanged on VMESA
      • Copy Selected Files from a Group to a Destination with Fn Ft Unchanged on VMESA
      • Copy Selected Files from a Group to a Destination with Added Characters In Fn Ft on VMESA
      • Copy Selected Files from a Group to a Destination with Characters Stripped from Fn Ft on VMESA
      • Copy Selected Files with Equal Length Names from a Group to a Destination on VMESA
      • Copy Selected Files from a Group to a Destination with Fn Ft Formatting on VMESA
      • Copy Selected Files from a Group to a Destination with Fn Ft Reversed and Formatted on VMESA
      • Use SYSOPTS for DBCS in VMESA
    • VSE
      • Copy a File from z/OS to VSE (DYNAM/T Tape Files)
      • Copy a z/OS PDS Member to a New VSE File in a DYNAM Pool
      • Copy a z/OS BSAM File to a VSE-Controlled Disk Data Set
      • Copy a z/OS Sequential Data Set or PDS to a VSE-Controlled Tape Data Set
      • Copy a z/OS PDS Member to a VSE BSAM Sublibrary Member
      • Copy a z/OS PDS Member to a VSE VSAM Sublibrary Member
      • Copy a z/OS Sequential Data Set or z/OS PDS to a VSE-Controlled Tape Data Set
      • Copy an HP NonStop File to a VSE VSAM File
      • Copy a VSE VSAM File to an HP NonStop Node
      • Copy a VSE DYNAM-Controlled File to a VM Node
      • Use a Typekey to Copy a VSE DYNAM-Controlled File to a VM Node
      • Copy a VSE Sequential File to an OpenVMS Node
      • Copy a VSE Sequential File to Another VSE Sequential File
      • Copy a VSE Non-Labeled Tape to a VSE Sequential File
      • Copy the IBM Connect:Direct Message File to SL Tape on VSE
      • Copy a Non-managed Disk Data Set into Another Non-managed CKD Disk Data Set (VSE)
      • Copy a Non-controlled Disk Data Set to a Managed CKD Disk Data Set (VSE)
      • Copy a Non-managed Disk File into a Start Track 1 FBA Non-controlled Data Set (VSE)
      • Copy to Non-TMS Controlled Tapes (VSE)
      • Copy a Non-managed Disk File to a CA-DYNAM/D or CA-EPIC Start Track 1 FBA Non-controlled Data Set (VSE)
      • Print a Managed Disk Data Set (VSE)
      • Copy a Non-controlled Sequential File to a MSAM File (VSE)
      • Copy a Non-controlled Tape Data Set to a Controlled Disk File (VSE)
      • Copy Non-managed Disk Data Set to a Non-managed Tape Data Set (VSE)
      • Copy a Managed Disk Data Set to Another Managed Data Set (VSE)
      • Copy a Managed Generation Disk Data Set to Another Managed Data Set (VSE)
      • Copy a Controlled Disk Data Set to a Controlled Tape Output File (VSE)
      • Copy a Controlled BSAM Data Set to a MSAM Output Data Set (VSE)
      • Copy a Controlled Tape Data Set to a Controlled FBA Disk Output Data Set (VSE)
      • Copy a Controlled CKD Disk Data Set to a non-controlled Tape Data Set (VSE)
      • Copy a VSE Sublibrary Member from a BSAM Sublibrary to a Controlled Disk Data Set
      • Copy a VSE Sublibrary Member from a BSAM Sublibrary to a Controlled Tape Data Set
      • Copy a VSE/POWER LST Queue Member to a Controlled Disk Data Set
      • Copy a BSAM VSE Sublibrary to a New VSE BSAM Library
      • Copy a BSAM VSE Sublibrary to a New z/OS PDS
      • Copy a MSAM Data Set to a Controlled BSAM Data Set (VSE)
      • Copy a VSE VSAM to an i5/OS PDS Member
      • Copy a VSE VSAM File to an i5/OS Spooled File
      • Copy a VSE Librarian BSAM Member to a Preallocated z/OS PDS Member
      • Copy a VSAM VSE Library Member to a Preallocated z/OS PDS Member
      • Copy a VSE/POWER LST Queue Member to a Preallocated z/OS PDS
      • Copy a File from UNIX HP to a Controlled Disk Data Set on VSE Using LU6.2
      • Copy a File from HP UNIX to a VSE Controlled Disk Data Set Using TCP/IP
      • Copy a DBCS Data Set from VSE to UNIX Using the KSCXEBC Translation Table
      • Copy a DBCS Data Set from Microsoft Windows to VSE Using the KSCXEBC Translation Table
      • Copy a DBCS Data Set from VSE to Microsoft Windows Using the EBCXKSC Translation Table
      • Copy a DBCS Data Set from UNIX to VSE Using the EBCXKSC Translation Table
      • Copy a Data Set from a VSE Node to Another VSE Node
      • Use SYSOPTS for DBCS in VSE
    • z/OS
      • Use Defaults to Allocate a File (z/OS to z/OS)
      • Use %SUBDATE and %SUBTIME for a File Name (z/OS to z/OS)
      • File Allocation Using a TYPE File (z/OS to z/OS)
      • Copy a KSDS that Must be Extended
      • Copy a SAM File (z/OS to z/OS)
      • Copy a DFDSS Volume Dump (z/OS to z/OS)
      • Copy an Entire PDS (z/OS to z/OS)
      • Specify a Range and the NR Subparameter to Copy Selected PDS Members (z/OS to z/OS)
      • Copy One Member of a PDS (z/OS to z/OS)
      • Copy a PDS and Excluding an Individual Member (z/OS to z/OS)
      • Copy a PDS and Excluding Members Generically (z/OS to z/OS)
      • Copy a PDS and Using a Range to Exclude PDS Members (z/OS to z/OS)
      • Copy a PDS and Generically Selecting Members (z/OS to z/OS)
      • Copy PDS Members Using the EXCLUDE and SELECT Parameters (z/OS to z/OS)
      • Copy a PDS Using the ALIAS Parameter with SELECT and EXCLUDE (z/OS to z/OS)
      • Copy a PDS Member to Tape (z/OS to z/OS)
      • Use the IOEXIT Parameter (z/OS to z/OS)
      • Copy to a New SMS-Controlled Data Set (z/OS to z/OS)
      • Copy to a New SMS Data Set Using LIKE (z/OS to z/OS)
      • Create and Copy a PDSE Data Set (z/OS to z/OS)
      • Create and Copy a VSAM KSDS Data Set (z/OS to z/OS)
      • Create and Copy a VSAM ESDS Data Set (z/OS to z/OS)
      • Create and Copy a VSAM RRDS Data Set (z/OS to z/OS)
      • Create and Copy a VSAM Linear Data Set (z/OS to z/OS)
      • Copy a Data Set with a Security Profile (z/OS to z/OS)
      • Copy to z/OS Nodes with Unique Member Name Allocation (AXUNIQ Exit)
        • Resolution of a Unique Member Name by Appending a Digit
        • Resolution of a Unique Member Name by Truncating and Appending a Digit
      • Copy a Sequential File from z/OS to a Member of a Physical Data Base File on an i5/OS Node
      • Copy a Member of a Physical Data Base File from i5/OS to a Sequential File on z/OS
      • Copy a Data Set from z/OS to a Spooled File on i5/OS
      • Copy a Member of a PDS from z/OS to a Spooled File on i5/OS
      • Copy to an Entry-Sequenced File (z/OS to HP NonStop)
      • Create a Code 101 File (z/OS to HP NonStop)
      • Create a Code 0 Oddunstructured File (z/OS to HP NonStop)
      • Copy a Sequential File from a z/OS Node to an HP NonStop Node
      • Copy a File Submitted from z/OS to HP NonStop
      • Copy a File from HP NonStop on an EXPAND Network to z/OS
      • Use FUP in a Process Submitted on z/OS to Delete a File on HP NonStop
      • Use IBM Connect:Direct to Allocate a Partitioned File on a Single System (z/OS to HP NonStop)
      • SYSOPTS Syntax Conventions (z/OS to HP NonStop)
      • Copy Files Between z/OS and UNIX
      • Copy a File from z/OS to VM
      • Copy a z/OS PDS to a Set of Files on VM
      • Copy a z/OS File to Tape on VM
      • Copy a z/OS File to Spool on VM
      • Use the SYSOPTS Parameter (z/OS to OpenVMS)
      • Copy a File from z/OS to Microsoft Windows
      • Copy a File from Connect:Direct for z/OS to Connect:Direct for i5/OS
      • Copy a File From z/OS to i5/OS
      • Copy DBCS Data Sets Using Translation Tables in z/OS
      • MBCS Conversion During z/OS to UNIX Copy
      • MBCS Conversion During Microsoft Windows to z/OS Copy
      • MBCS Conversion During z/OS to z/OS Copy
      • Copying a File from zOS to Microsoft Windows using Substitution in a Destination Path:
      • CODEPAGE Conversion During a File Copy (z/OS to Microsoft Windows)
      • Create and Copy a LARGE Data Set (z/OS)
  • SUBMIT Statement Examples
    • Use SUBMIT with Symbolic Substitution (z/OS to z/OS)
    • Use SUBMIT with the DSN Parameter (z/OS to z/OS)
    • Submit a Microsoft Windows Process from a UNIX Node
    • Use SUBMIT at the Connect:Direct for HP NonStop Node
    • Use submit with the hold Parameter (UNIX to UNIX)
    • Use submit with the startt Parameter (UNIX to UNIX)
    • Submit a Process to Run Upon Successful Completion of a Copy (HP NonStop to HP NonStop)
    • Submit a Process on OpenVMS
    • Submit a Process That Copies a File from One UNIX Node to Another, Then to a Third UNIX Node
    • Submit a Process with Symbolics on VSE
    • Submit a Process Using Symbolics on VMESA
    • Submit a Process from UNIX to z/OS to Connect:Enterprise Using BATCHID
  • RUN JOB Statement Examples
    • HP NonStop
      • Run a Job on the z/OS Node from a Process Submitted on the HP NonStop Node
      • Execute Commands on UNIX from a Process Submitted from HP NonStop
    • Microsoft Windows
      • Microsoft Windows Run Job Statement
    • OpenVMS
      • Submit a Process with a RUN JOB on OpenVMS
      • Print and Delete the Log File on Connect:Direct for OpenVMS
      • Keep the Log File on Connect:Direct for OpenVMS
      • Print and Keep the Log File on Connect:Direct for OpenVMS
      • Run Job on OpenVMS
    • UNIX
      • Run a Job on UNIX from a Process Submitted from Another UNIX Node
      • Run a Job on z/OS from a Process Submitted on UNIX
      • Run a Job on Microsoft Windows from a Process Submitted on UNIX
      • Example UNIX Run Job
    • VM/ESA
      • RUN JOB Facility (VM to VM)
      • Example VMESA Run Job
    • VSE
      • VSE Run Job Statement
    • z/OS
      • Submit a Job to the z/OS Internal Reader
      • Run a Job on the i5/OS Node from a Process Submitted on the z/OS Node
      • Execute Commands on UNIX from a Process Submitted from z/OS
      • Use Run Job to Submit a Job on an i5/OS Node
      • Submit a Run Job on i5/OS from z/OS
  • RUN TASK Statement Examples
    • HP NonStop
      • Run FUP (Sterling Connect:Direct for HP NonStop Run Task)
      • Submit a Process with a Connect:Direct for OpenVMS RUN TASK from an HP NonStop Node
      • Submit a Process with a Connect:Direct for z/OS RUN TASK from an HP NonStop Node
      • Use Symbolics in a IBM Connect:Direct HP NonStop Run Task to Place a Job In the Spooler On Hold
    • i5/OS
      • Create and Save an Online Save File Through Connect:Direct for i5/OS
      • Notify the i5/OS User of Successful Process Completion
      • Restore Libraries Through Connect:Direct for i5/OS
      • Submit a Process with a Connect:Direct for OpenVMS RUN TASK from an i5/OS Node
    • Microsoft Windows
      • Submit a Process with a Connect:Direct for HP NonStop RUN TASK from a Microsoft Windows Node
      • Notify the i5/OS User of the Start of a Process
      • Submit a Process from Connect:Direct for Microsoft Windows to Run DMRTSUB on z/OS
      • Microsoft Windows Run Task Statement
    • OpenVMS
      • Submit a Process with a Connect:Direct for HP NonStop RUN TASK from an OpenVMS Node
      • Submit a Process with a RUN TASK on OpenVMS from an OpenVMS Node
      • Run Task on OpenVMS
    • UNIX
      • Submit a Process from UNIX to Run a Program on z/OS
      • Submit a Process with a Run Task on UNIX from Another UNIX Node
      • Submit a Process from UNIX to Run a Program on i5/OS
      • Submit a Process from UNIX to Run a Program on Microsoft Windows
      • Example UNIX Run Task
    • VM/ESA
      • Execute DMRTDYN in a RUN TASK Environment (VM)
      • Resolve Symbolics Within DMRTDYN in a RUN TASK Environment (VM)
      • Submit a Process with a RUN TASK on i5/OS from a VM Node
      • Example VMESA Run Task
    • VSE
      • VSE Run Task Statement
    • z/OS
      • RUN TASK Examples for CA-7 (z/OS to z/OS)
      • RUN TASK Using Control-M
      • RUN TASK Using DMRTDYN (z/OS)
      • Copy a Member of an Object from i5/OS to a PDS Member and then Deleting the Library
      • Submit a Process with a RUN TASK on OpenVMS from an z/OS Node
      • Initiate a RUN TASK Statement at the HP NonStop Node (z/OS to HP NonStop)
      • Use Symbolics with a RUN TASK Statement (z/OS to HP NonStop)
      • Use Bracketing Backslashes and Quotation Marks (z/OS to HP NonStop)
      • Use Concatenation Characters in a Run Task (z/OS to HP NonStop)
      • Select Statistics for the Current Day (Sterling Connect:Direct for HP NonStop Run Task)
      • Define a VSE VSAM File and Copying a Sequential File from z/OS
      • Submit a Process from z/OS to Execute UNIX Commands
      • Submit a Process from z/OS to Execute Microsoft Windows Programs
      • Use Run Task to Create a Save File on i5/OS
      • Submit a Run Task from z/OS to i5/OS
      • z/OS RUN TASK to Execute a COBOL Program
      • Pass Mixed Case Parameters through an z/OS RUN TASK to DMRTSUB
  • Conditional Statement Examples
    • Use of Conditional Statements (OpenVMS to z/OS)
    • Use of Conditional Logic (z/OS to VSE)
    • Use of Conditional Logic (i5/OS to z/OS)
    • Use of Conditional Logic (HP NonStop to z/OS)
    • Use of Conditional Statements to Test for Process Completion on OpenVMS
    • Use of Conditional Statement on OpenVMS
    • Use of Conditional Statements in a UNIX Process
    • Use of Conditional Statements in VMESA
    • Use of Conditional Statements in a VSE Process
    • Use of Conditional Statements in a Microsoft Windows Process
    • Use of Conditional Logic to Test Message ID in z/OS
    • Use of Conditional Logic to Test Highest Return Code with %MAXRC in z/OS
    • Use Conditional Logic to Test Variables in z/OS
  • Example UNIX pend Statement
• IBM Sterling Connect:Direct V6.4.0 PDFs
• Notices