Connect:Direct for HP NonStop Copy Statement for OSS Disk and Tape Files

The COPY statement allows you to copy files from one node to another.

The COPY statement contains a FROM parameter that specifies the source file name and a TO parameter that specifies the destination file name. Additional parameters and subparameters can be specified to customize the file transfer operation.

To copy from one IBM® Connect:Direct® platform to another, refer to the appropriate COPY FROM and TO pages for those platforms. For example, if the source file is located on a Connect:Direct for z/OS® node, refer to the Connect:Direct for z/OS COPY FROM information. If the destination node is Connect:Direct for HP NonStop, refer to the TO information for this platform.

Note: Use SYSOPTS parameters, not DCB, when creating HP NonStop files, as not all z/OS DCB statements have an exact correlation to HP NonStop file attributes.

If a time-out occurs before a tape is loaded on an adjacent node, the operator must cancel the tape mount. This action cancels the Process on the adjacent node.

The following is the Connect:Direct for HP NonStop Copy statement for Guardian Disk and Tape Files. See the Sterling Connect:Direct for HP NonStop Process Parameters for more information.

Label	Statement	Parameters
stepname	COPY	FROM	(
			DSN=filename \| FILE=filename
			PNODE \| SNODE
			DCB=([RECFM=record-format] [,BLKSIZE=no.-bytes] [,LRECL=no.-bytes
			DISP=([OLD \| SHR] , [KEEP \| DELETE])
			IOEXIT=[exit-name \| (exit-name [,parameter,...])] \| [$process-name]
			SYSOPTS=["SET XLATE ON \| YES \| OFF \| NO \| table-name"] ["SET OPENFILEXMT Y"]
			)
		TO	(
			DSN=filename \| FILE=filename
			PNODE \| SNODE
			DCB=([BLKSIZE=no.-bytes]) [,DSORG=[U \| 0] \| [R \| 1] \| [E \| 2] \| [K \| 3] [,KEYLEN=no.-bytes] [,LRECL=no.-bytes] [,RECFM=record-format]
			TYPE=typekey
			DISP=([NEW \| OLD \| MOD \| RPL \| SHR],, [KEEP \| DELETE])
			IOEXIT=[exit-name \| (exit-name [,parameter,...])] \| [$process-name]
Note: For transfers from Microsoft Windows to HP NonStop, use single quotation marks around each SET statement. Omit the parentheses and enclose the entire SYSOPTS statement in double quotation marks.			SYSOPTS=(["SET TYPE [U \| 0] \| [R \| 1] \| [E \| 2] \| [K \| 3]"] ["SET CODE file-code"] ["SET EXT (extent.size) \| (pri.ext.size , sec.ext.size)"] ["SET REC record-length"] ["SET BLOCK data-block-length"] ["SET [NO] COMPRESS"] ["SET FORMAT 0\|1\|2"] ["SET PART ( [sec.partition.num] [\system.name.$volume] [pri.ext.size] [sec.ext.size] [partial.key.value] )"] ["SET [NO] AUDIT"] ["SET [NO] DCOMPRESS"] ["SET [NO] ICOMPRESS"] ["SET KEYLEN key-length"] ["SET KEYOFF key-offset"] ["SET ALTKEY ([key-specifier]) ["SET [NO] PARTONLY"] ["SET ODDUNSTR"] ["SET [NO] REFRESH"] ["SET [NO] AUDIT"] ["SET MAXEXTENTS maximum-extents"] ["SET BUFFERSIZE unstructured-buffer-size"] ["SET [NO] BUFFERED"] ["SET [NO] AUDITCOMPRESS"] ["SET [NO] VERIFIEDWRITES"] ["SET [NO] SERIALWRITES"] ["SET [NO] BLOCKIO"] ["SET [NO] LARGEIO"] ["SET FAST.LOAD Y"] [FILE key-file-number] [KEYLEN key-length] [KEYOFF key-offset] [NULL \| NO NULL] [[NO] UNIQUE] [[NO] UPDATE"] )"] ["SET ALTFILE key-file-number ,filename"] ["SET [NO] ALTCREATE"] ["SET FAST.LOAD.PRI priority"] ["SET FAST.LOAD.CPU cpu-number"] ["SET FAST.LOAD.SORTED Y"] ["SET XLATE ON \| YES \| OFF \| NO \| table-name"] ) )
			CKPT=nK \| nM
			COMPRESS [[PRIMEchar=X'xx' \| X'20' \| C'c' ] \| EXTended] Note: If the SNODE is B2B Integrator, only COMRESS EXT is supported.

Label	Statement	Parameters
stepname	COPY	FROM	(
			DSN=filename \| FILE=filename
			PNODE \| SNODE
			DCB=([RECFM=record-format] [,BLKSIZE=no.-bytes] [,LRECL=no.-bytes
			DISP=([OLD \| SHR] , [KEEP \| DELETE])
			IOEXIT=[exit-name \| (exit-name [,parameter,...])] \| [$process-name]
			SYSOPTS=["SET XLATE ON \| YES \| OFF \| NO \| table-name"] ["SET OPENFILEXMT Y"]
			)
		TO	(
			DSN=filename \| FILE=filename
			PNODE \| SNODE
			DCB=([BLKSIZE=no.-bytes]) [,DSORG=[U \| 0] \| [R \| 1] \| [E \| 2] \| [K \| 3] [,KEYLEN=no.-bytes] [,LRECL=no.-bytes] [,RECFM=record-format]
			TYPE=typekey
			DISP=([NEW \| OLD \| MOD \| RPL \| SHR],, [KEEP \| DELETE])
			IOEXIT=[exit-name \| (exit-name [,parameter,...])] \| [$process-name]
Note: For transfers from Microsoft Windows to HP NonStop, use single quotation marks around each SET statement. Omit the parentheses and enclose the entire SYSOPTS statement in double quotation marks.			SYSOPTS=(["SET TYPE [U \| 0] \| [R \| 1] \| [E \| 2] \| [K \| 3]"] ["SET CODE file-code"] ["SET EXT (extent.size) \| (pri.ext.size , sec.ext.size)"] ["SET REC record-length"] ["SET BLOCK data-block-length"] ["SET [NO] COMPRESS"] ["SET FORMAT 0\|1\|2"] ["SET PART ( [sec.partition.num] [\system.name.$volume] [pri.ext.size] [sec.ext.size] [partial.key.value] )"] ["SET [NO] AUDIT"] ["SET [NO] DCOMPRESS"] ["SET [NO] ICOMPRESS"] ["SET KEYLEN key-length"] ["SET KEYOFF key-offset"] ["SET ALTKEY ([key-specifier]) ["SET [NO] PARTONLY"] ["SET ODDUNSTR"] ["SET [NO] REFRESH"] ["SET [NO] AUDIT"] ["SET MAXEXTENTS maximum-extents"] ["SET BUFFERSIZE unstructured-buffer-size"] ["SET [NO] BUFFERED"] ["SET [NO] AUDITCOMPRESS"] ["SET [NO] VERIFIEDWRITES"] ["SET [NO] SERIALWRITES"] ["SET [NO] BLOCKIO"] ["SET [NO] LARGEIO"] ["SET FAST.LOAD Y"] [FILE key-file-number] [KEYLEN key-length] [KEYOFF key-offset] [NULL \| NO NULL] [[NO] UNIQUE] [[NO] UPDATE"] )"] ["SET ALTFILE key-file-number ,filename"] ["SET [NO] ALTCREATE"] ["SET FAST.LOAD.PRI priority"] ["SET FAST.LOAD.CPU cpu-number"] ["SET FAST.LOAD.SORTED Y"] ["SET XLATE ON \| YES \| OFF \| NO \| table-name"] ) )
			CKPT=nK \| nM
			COMPRESS [[PRIMEchar=X'xx' \| X'20' \| C'c' ] \| EXTended] Note: If the SNODE is B2B Integrator, only COMRESS EXT is supported.