Local Initialization Parameters
Local Initialization Parameters | Default Values |
---|---|
CDPLEX.INITPARM.BACKUP = member | none |
CDPLEX.MANAGER = NO | YES | NO |
CDPLEX.MSGID = NONE | xx | NONE |
CDPLEX.PLEXCLASSES = (*,plexclass, …, plexclass) | * |
CDPLEX.REDIRECT = ((INT_IPv4,EXT_IPv4),(INT_IPv6,EXT_IPv6),)
|
Defaults to the first IPV4 or IPV6 address for the server. |
CDPLEX.REDIRECT.EXCEPTION = ((Mgr-IP, Svr-IP, Svr-port, Exception-IP, Exception-port),...) | none |
CDPLEX.SERVER = IBM® Connect:Direct®/Server name | none |
CDPLEX.SERVER.JOBDSN = data set name | none |
CDPLEX.SERVER.JOBMEM = ((member name, server name), …) | none |
CDPLEX.SERVER.NODE = nodename | none |
CDPLEX.TIMER = 5 | number of minutes | 5 |
CDPLEX.VTAM = (VTAM-APPL, P/S-Node-APPL) | none |
CTCA = YES | NO | NO |
CTCA.TIMER = number of seconds to wait when establishing a CTCA connection | 180 |
DEBUG = nnnnnnnnn | 00200000 |
MAXUSERS value | |
MAXPRIMARY = number of primary sessions | 6 |
MAXPROCESS = number of executing PNODE plus SNODE Processes | MAX-PRIMARY plus MAXSECONDARY |
MAXSECONDARY = number of secondary sessions | 6 |
MAX.TAPE = number of tape Processes | NONE | NOLIMIT | 10 |
QUIESCE = YES | NO | NO |
SECURITY.EXIT = (modname,DATASET | ALL,PSTKT)
| OFF SECURITY = (modname,DATASET | ALL,PSTKT) | OFF |
C:D Authorization Facility |
SNA = YES | NO | YES |
STAT.INIT = WARM | COLD | WARM |
STATISTICS.EXIT = modulename | (modname[,MANAGER] | [,SERVER] | [,BOTH]) | none |
TCP = OES | NO | NO |
TCP.API.LISTEN = ( (addr1 , port1) , (addrn , portn) ) | If the parameter is specified with an address only, the port can default to 1363. |
TCP.LISTEN = ( (addr1 , port1) , (addrn , portn) )TCP.TIMER = wait time in seconds | If the parameter is specified with an address only, the port can default. The default port is 1364. |
300 | |
TCQ = WARM | COLD | WARM |
TRACE.BUFFER = nnn | 2 | 2 |
UDT = YES | NO | NO |
UDT.MAXPROCESS = 2 | number of executing UDT Processes | 2 |
UDT33.LISTEN = ((ipaddr,port)[,(ipaddr,port)…]) | The default port is 1366. |
UPPER.CASE = YES | NO | NO |
V2.BUFSIZE = (maximum buffer size for this transmission, TCP/IP send/receive buffer size) | 32K, 128K |
ZIIP = NONE | EXTCOMP | SSLTLS | ALL | PROJECT | NONE |
ZFBA = YES | NO | NO |