Viewing Process Detail

You can use the SELECT PROCESS - PROCESS DETAIL screen to view detailed information about pending or executing Processes selectively, by choosing any one of the Process details, such as name, number, queueing priority, schedule time, retain status, I/O bytes, and so forth.

  1. To access the SELECT PROCESS - PROCESS DETAIL screen, type S and press Enter on the SELECT PROCESS - OPERATOR TABLE screen.

    Following is an example.

                               SELECT PROCESS - PROCESS DETAIL                  11:21:16
    OPTION ==> S (M or S)                                               node.name
    
      Options: M - Last Msgid; S - Select process detail           RECEIVING SIDE
     Process Name   => SEQ001     Number    => 3                Step   => STEP1
     Other Node     => SC.SC1.SWOOD2                            Status => EX
     Commid         => 26221;10.20.129.168                      Queue  => EXEC
     Function       => COPY       Sub State =>                  State  => FILE I/O
     Server Name    => SDWSERV1   PLEXCLASS => ( *                 )
     Submitter      => SC.SC1.SWOOD1
     Userid         => SYS002
     Scheduled Time =>            Date      =>                  Day    =>
     Queueing Prty  => 10         Class     => 1                Retain => NO
     Submitted Class=> NONE       Max Class => NONE             Sess.Id=> PNOD
     Session restrt => 0          Dyn restrt=> 0                RouteID=>
     Last Msgid     =>            Last RC   => 00000000         RetProc=>
    
     Sending File   => CSDQA1.TESTFILE.BENCH.M10
     Receiving File => SWOOD1.TEMPM10
     Volume seq no. => 1          Volser    => USER28           TTRN   => 000B0100
     Blks           => 23         Recs      => 0                RUs    =>
     I/O bytes      => 642,160                                  Member =>
     VTAM bytes     => 436,224                      Compression Factor =>
    
     PF keys:  1 Help   2 Msg   3 Exit   4 Menu   6 Id   Enter Refresh 

    The following table describes the fields on the SELECT PROCESS - PROCESS DETAIL screen:

    Field Description
    SIDE This 14-character field contains the message SENDING SIDE if the PROCESS DETAIL parameters are from the sender and the message RECEIVING SIDE if the PROCESS DETAIL parameters are from the receiver. The field occurs in the upper right corner below the NODE field.
    Process Name This 8-character field contains the name of the selected Process.
    Number This 6-character field contains the Process number.
    Step This 8-character field contains the name of the currently executing step of the selected Process.
    Other Node This 16-character field contains the name of the node identified as the destination of the Process.
    Status This 2-character field contains the current status of the queue:
    • EX - currently executing
    • HC - is held for call
    • HE - held in error
    • HI - held initially
    • HO - held by the operator
    • HP - an error occurred during initiation of Process execution
    • HR - submitted with RETAIN=YES
    • HS - is held for suspension
    • RA - is held for restart allocation error
    • RH - is held for restart
    • RS - is being restarted
    • WA - is awaiting acknowledgement
    • WC - is awaiting connection
    • WP – is waiting on PARSESS (Parallel Session) availability.
    • WR - is awaiting restart
    • WS - is awaiting the designated start time
    • WT - is awaiting transport protocol
    • WX - is awaiting an eligible IBM® Connect:Direct®/Server
    Commid This 46-character field contains the SNA VTAM® APPLID (application identification) of the destination IBM Connect:Direct node. If the destination node is TCP/IP, this field contains the port and IP address of the remote node in the format port_number;IP_address.
    Queue This 5-character field contains the name of the queue where the selected Process resides: WAIT, TIMER, EXEC, or HOLD.
    Function This 8-character field contains the name of the function being performed by the Process.
    Sub State This 12-character field contains the name of the current session macro in execution.
    State This 8-character field contains the current state of the Process.
    Server Name The name of the IBM Connect:Direct/Server where the Process runs. This field only applies to a IBM Connect:Direct/Plex.
    PLEXCLASS The class that directs the Process to only certain servers in a IBM Connect:Direct/Plex. This field only applies to a IBM Connect:Direct/Plex.
    Submitter This 16-character field contains the name of the submitting node.
    Userid This 8-character field contains the userid that submitted the Process.
    Scheduled Time This 8-character field contains the time when the Process is scheduled to execute.
    Date This 8-character field contains the date when the Process is scheduled to execute.
    Day This 10-character field contains the name of the day when the Process is scheduled to execute.
    Queueing Prty This 3-character field contains the queueing priority of the selected Process. The range of priorities is 0–15 (highest).
    Class This 4-character field contains the class or parallel session used.
    Retain This 4-character field contains YES or NO to indicate the retain status.
    Submitted Class This 4-character field contains the submitted class.
    Max Class This 4-character field contains the maximum number of parallel sessions allowed.
    Sess. Id This 4-character field contains the session ID (P for SNA primary and S for SNA secondary).
    Session restrt This 3-character field contains the number of consecutive session attempt failures.
    Dyn restrt This 3-character field contains the number of failed attempts to perform a copy to an unavailable file.
    RouteID This 8-character field contains the userid to notify upon completion of a step or Process.
    Last Msgid This 8-character field contains the last message number received by this Process. Selecting option M displays the text of the message.
    Last RC This 8-character field contains the last step return code, if the Process went into execution.
    RetProc The retained Process number.
    Sending File This 44-character field contains the name of the sending file.
    Receiving File This 44-character field contains the name of the receiving file.
    Volume seq no. This 3-character field contains the volume sequence number.
    Volser This 6-character field contains the volume serial number.
    TTRN This 8-character field contains the TTR address (disk) or relative block (tape) currently accessed.
    Blks This 9-character field contains the number of blocks sent or received.
    Recs This 14-character field contains the number of records sent or received as a result of the Process.
    RUs This 9-character field contains the number of request units sent or received.
    I/O bytes This 22-character field contains the number of bytes read or written from external storage.
    Member This 8-character field contains the name of the copied member during a PDS copy operation.
    VTAM bytes This 22-character field contains the number of bytes transmitted.
    Compression Factor This 6-character field contains the percentage of savings from the use of data compression from a copy Process.
  2. Take one of the following actions in the OPTION field:
    • To display the text of the last message received for this Process, type M and press Enter.
    • To refresh the SELECT PROCESS -- PROCESS DETAIL parameters, type S and press Enter.