Product Messages

These messages from the system software are arranged in alphabetical order.

Activate rejected, node is already active - node name: This message is displayed if you select option A in the field beside an active node.
All values reset from config file: This message is displayed if you press Clear.
All values reset from signon defaults file: This message is displayed if you press CLEAR on the SIGNON DEFAULTS screen.
A printer must be specified in your Signon Defaults in order to use 'P': This message is displayed if you forgot to type in a printer ID, before you selected option P, and then pressed Enter.
Auto-return in progress...: This message is displayed after you exited the Connect:Direct® for z/OS® CICS® program, and retyped the IBM® Connect:Direct transaction. The automatic return feature must be enabled before any use, however.
CICS USERID required: This message is displayed if you pressed Enter with a blank screen present or with no CICS USERID entry present.
Control record successfully updated: This message is displayed after an edit session when you press PF9.
DTF NODE NAME required: This message is displayed if you pressed Enter, or PF5, or PF6, with a blank screen.
End of file: This message is displayed when you scroll forward to the bottom of the file through repeated use of the PF8 key.
End of file; values read from config file: This message is displayed when you scroll forward to the end of file and then press PF8.
End of file; values read from signon defaults file: This message is displayed if you press PF8 repeatedly and attempt to access data beyond the end of file.
End of node list: This message is displayed if you press PF8 while you are at the bottom of the available node list.
FILENAME and FILETYPE are required: This message is displayed if you pressed Enter on a blank screen, without typing the filename and type of file.
First page: This message is displayed if you press PF7 repeatedly on a screen with more than one page and attempt to go up past the first page.
Immediate shutdown rejected; interface is shut.: This message is displayed if option I is already selected, and the interface is already inactive.
Immediate shutdown started: This message is displayed if you select option I. The INTERFACE STATUS field changes to INACTIVE.
Interface has been started: This message is displayed if you select option A and press Enter.
Interface is already active: This message is displayed if you select option A, and the interface is already active or in the process of starting.
Interface must be active to start monitor.: This message is displayed if you select option M, and the interface is not active. You must select option A before option M.
Last Msgid field is blank: This message is displayed if you select the M option, and press Enter, with the LAST MSGID field blank.
Last page: This message is displayed if you press PF8 repeatedly on a screen with more than one page and attempt to go down past the last page.
Left page: This message is displayed if you repeatedly press PF10 and attempt to access data past the left edge of the screen.
Line command invalid: This message is displayed if you select a different line command other than those defined and press Enter.
M and S are the only valid line commands: This message is displayed, if you select a line command other than those defined in the CMD field and press Enter.
M is the only valid line command: This message is displayed if you type in a character other than M in the command line and press Enter.
Monitor has been started.: This message is displayed if you select option M.
Monitor is already running.: This message is displayed if option M is already selected and you select option M again.
MYNODE.OS.USERID NODE invalid: This message is displayed if the node name you typed in is not authorized for signon.
NETWORK NODE NAME required: This message is displayed if you press Enter, or PF5, or PF6, with a blank screen present or with the NETWORK NODE NAME field entry blank.
Network node successfully added - node name: This message is displayed when the DTF NODE RECORDS screen has your correct data in the fields, and you press PF5.
Network node successfully deleted - node name: This message is displayed when the DTF NODE RECORDS screen has your correct data in the fields, and you press PF6.
No active work queue entries for node node name: This message is displayed if you select option W, and no active subtasks are in the work queue.
Node activation started, node node name: This message is displayed if you select option A in the field beside an inactive node.
Node has been restarted - node name: This message is displayed in the STATUS ALERT MESSAGE field when the NETWORK NODE RECORDS have been updated to activate a node.
NODE invalid: This message is displayed if the node name you typed in is not authorized for signon.
NODE NUMBER invalid: This message is displayed if you typed in a node number that is not in the list of available nodes and pressed Enter.
NODE NUMBER or NODE NAME required: This message is displayed if you press Enter, with nothing typed in.
NODE required: This message is displayed if you pressed Enter on a blank screen without typing in a node name.
NODE TYPE invalid: This message is displayed if the DTF NODE NAME contains an unacceptable naming convention.
No help available: This message is displayed if you press PF1 while at a screen with no online help facilities available.
No password is currently on file: This message is displayed in the IBM Connect:Direct PASSWORD field if you typed an unacceptable or blank IBM Connect:Direct PASSWORD.
Normal shutdown rejected; interface is inactive.: This message is displayed if already select option S, and you select option S again.
Normal shutdown started: This message is displayed if you select option S, press Enter. If you press Enter again, the MONITOR TASK NUMBER field changes to NOT RUNNING.
No signed-on users: This message is displayed if the administrative user selected line command T from the USER STATUS and pressed Enter, thereby terminating the administrative user session. This message is also displayed if you type U from the PRIMARY MENU and no signed-on users of IBM Connect:Direct exist.
No users meeting selection criteria: This message is displayed if a CICS userid is typed in the CICS USERID field that did not match those users logged on. First, check the USER STATUS screen to see who is logged on for a match.
OPTION invalid: This message is displayed if you type in an option other than those defined on the PRIMARY MENU.
OPTION required: This message is displayed if you press Enter, without typing in an option.
Password is on file, but not displayed: This message is displayed if you type a IBM Connect:Direct password that is already in the SIGNON DEFAULT record.
Password is present: This message is displayed if the PASSWORD field on the SIGNON DEFAULTS screen is filled with your password. The PASSWORD field is darkened to maintain security.
Password is absent: This message is displayed if you have not typed your PASSWORD in the field on the SIGNON DEFAULTS screen. As soon as you type the password, the rest of the required data, and press Enter, the message changes to PASSWORD IS PRESENT.
Past end of file - 'Prev' not available: This message is displayed when you scroll backward to the top of the file and then press PF7.
PF key invalid: This message is displayed in the MESSAGE field if you pressed a PF key other than those defined on the screen.
Press Enter to continue: This message is displayed if you typed in all required data correctly and pressed Enter. This message indicates your chance to abort the COPY file Process.
PROCESS NAME required: This message is displayed if you pressed Enter without typing in the Process name.
PROCESS NUMBER number: This message is displayed after a successful execution of a COPY file Process, where number is the system-generated Process number.
Record cannot be deleted, it is not on file: This message is displayed if you type in the DTF NODE NAME and then press PF6. No match exists between the DTF NODE NAME and those specified in the configuration file, and therefore the record cannot be deleted.
Record cannot be updated, it is not on file: This message is displayed if you type in the DTF NODE NAME and then press PF9. No match exists between the DTF NODE NAME and those specified in the configuration file, and therefore the record cannot be updated.
Record not found; hit any key when ready.: This message is displayed if you type in the DTF NODE NAME and press Enter, but no match exists in the DTF NODE RECORDS screen.
Right page: This message is displayed if you repeatedly press PF11 and attempt to access data past the right edge of the screen.
SAFA000I - Connect:Direct signon process completed.: This message is displayed if you signed on successfully.
SCBI190I - Process specified not in process library.: This message is displayed if you typed in a Process name that is not recognized by the system, and pressed Enter. Check the contents of your PROCESS.LIB to determine those available.
SCIA011I - Connect:Direct/DTF not active. Extended Submit Facility now available.: This message is displayed if the DTF is not working under IBM Connect:Direct. ESF is a substitute for the DTF in this case, but is limited to one Process per user.
SCCS002I - No room available on work queue for this node. The Connect:Direct for CICS work queue for this DTF node is full.: This message is displayed when the work queue reaches its maximum capacity of tasks. Try your request again at a lower usage time.
SCCS003I - Connect:Direct for CICS monitor is not active.: This message is displayed when the DGAM transaction is not running.
SCCS007I - DTF node not active to Connect:Direct for CICS.: This message is displayed if the node name you typed in is not active in the IBM Connect:Direct system.
SCCS007I - DTF node not active to Connect:Direct CICS.: This message is displayed if the node name you typed in is not active in the IBM Connect:Direct system. If you are an administrator, check the NODE STATUS screen.
SCCS008I - Connect:Direct for CICS signon failure.: This message is displayed when a system logic error prevented your Connect:Direct for z/OS CICS signon.
SCCS009I - Connect:Direct for CICS connection to DTF node is being shut.: This message is displayed when the logical connection from Connect:Direct for z/OS CICS to the DTF node is being shut down.
SCCS010I - Connect:Direct for CICS has been shut down.: This message is displayed when the Connect:Direct for z/OS CICS interface has been shut down by a system administrator, without waiting for active requests to complete execution.
SCCS011I - Connect:Direct for CICS subtask has been shut.: This message is displayed when the Connect:Direct for z/OS CICS subtask assigned to process your request has been shut down, without waiting for active requests to complete execution.
SCCS013I - Copyfile successfully submitted.: This message is displayed if you typed in all the required data on the SENDING FILE screen and the RECEIVING FILE screen, and pressed Enter. You are returned to the COPYFILE screen from the RECEIVING FILE screen. The message is displayed only when a COPY file Process successfully completes under DTF.
SCCS014I - Output limit has been exceeded.: This message is displayed if the total number of lines returned to the DTF node exceeded the limit defined for the node during a SELECT operation.
SCCS016I - Connect:Direct for CICS connection to DTF node is being shut.: This message is displayed when the logical connection from Connect:Direct for z/OS CICS to the DTF node is being shut down.
SCCS018I - Request could not be assigned to a subtask.: This message is displayed if you typed in incorrect data or unknown data. The system could not place the signon request in the work queue assigned to the DTF node for the length of time required to complete the signon process. Number of maximum users was exceeded, or incorrect entries in the SIGNON DEFAULTS record caused the failure.
SCCS023I - DTF node now available in ESF mode only.: This message is displayed if the DTF is down.
SENDING DSNAME required: This message is displayed if you pressed Enter, without typed a filename.
Sending or receiving node must equal current node - MYNODE.OS.USERID: This message is displayed if you typed in a different node number from yours in the sending number field and pressed Enter.
SESF000I - Process successfully submitted via ESF.: This message is displayed if you typed in all the required data on the SENDING FILE screen and the RECEIVING FILE screen and pressed Enter. You are returned to the COPYFILE screen from the RECEIVING FILE screen. The message is displayed only when you complete successfully a COPY file Process under ESF (when DTF is not working).
Shut immediate started, node node name: This message is displayed if you select option I, and you press Enter on an active node.
Shut normal started, node node name: This message is displayed if you select option N, and you press Enter, on an active node. The STATUS field changes to INACT, and the REQUEST field changes to SHUTNORM.
Shut rejected; node already inactive - node name: This message is displayed if you select option S and you press Enter on an inactive node.
Signon Defaults successfully updated - userid: This message is displayed if you press PF9 while at the SIGNON DEFAULTS screen.
SOPA000I - Select process command was successful.: This message is displayed if you select option S and press Enter.
SOPA006I - No process(es) found matching the search criteria.: This message is displayed if you typed in values on the SELECT PROCESS screen, pressed Enter, and no match was found.
SOPA011I - One or more processes SELECTed.: This message is displayed if you press Enter without selecting a line command option.
SOPS000I - Select Statistics command successfully completed.: This message is displayed if you type in the correct data on the SELECT STATISTICS screen and press Enter.
SOPS006I - No statistics were found matching the criteria specified.: This message is displayed if you type in the correct data on the SELECT STATISTICS screen and press Enter, but there was no Process data in Connect:Direct for z/OS CICS that matched your data.
START DATE invalid: This message is displayed if you typed in a start date that is unrecognizable by Connect:Direct for z/OS CICS.
Start of file: This message is displayed if you scroll back to the top of the file through repeated use of the PF7 key.
Start of file; values read from config file: This message is displayed when the you press PF7 repeatedly to get to the top of the configuration file, then PF8, and then PF7.
Start of file; values read from signon defaults file: This message is displayed if you press PF7 repeatedly and attempt to access data before the beginning of the file.
Start of node list: This message is displayed if you press PF7 while you are already at the top of the available node list.
START TIME invalid: This message is displayed if you pressed Enter, with nothing typed in on the screen, or if you typed in a start time that is unrecognizable by Connect:Direct for z/OS CICS and pressed Enter.
UNSUPPORTED FUNCTION: This message is displayed if the CICS Interface is not started or if you typed in a command unknown to the system.
User does not have active work: This message is displayed if you select line commands F or C and no active subtask exists in the USER STATUS.
USS Command Completed Successfully: This message is displayed when the CICS signon is successful.
Value must be numeric if typed: This message is displayed if you typed in other characters than 0 to 9 and pressed Enter.
Values read from config file * * * * *: This message is displayed if you press PF9. The screen is updated with the values recorded in the configuration file.

Note: The following message begins with a variable field and can change as the node names are changed.
node name not NETWORK NODE IN NETMAP specified: This message is displayed if you type in the DTF NODE NAME and then press PF5. No match exists between the DTF NODE NAME and those specified in the NETMAP.
You must sign on to CICS before using Connect:Direct for CICS: This message is displayed in the STATUS ALERT MESSAGE field if you attempted to sign on to IBM Connect:Direct before CICS.