Monitoring Agent for VMware VI metrics

The metrics for Monitoring Agent for VMware VI resource types collect data for monitoring with IBM Cloud Pak for Multicloud Management. Every Monitoring Agent for VMware VI resource type defines a set of dimensions and metrics. The descriptions provide such information as data type, dimension key, and metric unit.

Resource vmCluster

This attribute group contains metrics that describe the configuration and performance of a cluster. The following section lists the metrics, dimensions and components of Resource vmCluster.

Metrics

The following metrics are available for the resource.

CPU Utilization

• The total number of CPU resources being used by the member servers divided by the total CPU of the cluster, excluding any members in maintenance mode.
• The type is double.
• The unit is resources.

Datastores Total Free Space (MB)

• The total free space of all data stores connected to this cluster in MB.
• The type is int.
• The unit is megabytes.

Datastores Total Space (MB)

• The total space of all data stores connected to this cluster in MB.
• The type is int.
• The unit is megabytes.

Effective CPU (GHz_

• The amount of CPU in GHz that is available to run virtual machines.This is an aggregation from all servers that are running normally.The amount of CPU used by the service consoles on each server is not included in the total. This is not available in the UI by default. It can be made available through dynamic configuration.
• The type is double.
• The unit is gigahertz.

Effective Memory

• The amount of memory in GB that is available to run virtual machines. This is not available in the UI by default. It can be made available through dynamic configuration.
• The type is double.
• The unit is gigabytes.

Effective Servers

• The number of ESX servers that are available to run virtual machines.Hosts that are unresponsive or in VMware maintenance mode are not counted. This is not available in the UI by default. It can be made available through dynamic configuration.
• The type is int.
• The unit is servers.

Memory Utilization

• The total amount of memory resources being used by the member servers divided by the total memory of the cluster, excluding any members in maintenance mode.
• The type is double.
• The unit is megabytes.

Number vMotions

• The total number of migrations that have occurred within this cluster. This is not available in the UI by default. It can be made available through dynamic configuration.
• The type is int.
• The unit is migrations.

Percent Datastore Usage

• The percentage of datastore used by the cluster.
• The type is double.
• The unit is percent.

Percent Effective CPU

• The percentage of CPU for the cluster that is available to run virtual machines.
• The type is int.
• The unit is percent.

Percent Effective Memory

• The percentage of memory for the cluster that is available to run virtual machines. This is not available in the UI by default. It can be made available through dynamic configuration.
• The type is int.
• The unit is percent.

Percent Effective Servers

• The percentage of servers defined to the cluster that are available to run virtual machines.
• The type is int.
• The unit is percent.

Physical NICs

• The total number of physical network interface cards in the cluster. This is not available in the UI by default. It can be made available through dynamic configuration.
• The type is int.
• The unit is NICs.

Physical NICs Down

• The total number of physical network interface cards in the cluster with a link status of down. This is not available in the UI by default. It can be made available through dynamic configuration.
• The type is int.
• The unit is NICs.

Powered on VMs

• The number of virtual machines that are configured within this cluster that are powered on. This is not available in the UI by default. It can be made available through dynamic configuration.
• The type is int.
• The unit is virtualMachines.

Servers utilizing 0-10 Percent

• The number of servers in this cluster whose CPU usage is 0 - 10 percent. This is not available in the UI by default. It can be made available through dynamic configuration.
• The type is int.
• The unit is servers.

Servers utilizing 11-20 Percent

• The number of servers in this cluster whose CPU usage is 11 - 20 percent. This is not available in the UI by default. It can be made available through dynamic configuration.
• The type is int.
• The unit is servers.

Servers utilizing 21-30 Percent

• The number of servers in this cluster whose CPU usage is 21 - 30 percent. This is not available in the UI by default. It can be made available through dynamic configuration.
• The type is int.
• The unit is servers.

Servers utilizing 31-40 Percent

• The number of servers in this cluster whose CPU usage is 31 - 40 percent. This is not available in the UI by default. It can be made available through dynamic configuration.
• The type is int.
• The unit is servers.

Servers utilizing 41-50 Percent

• The number of servers in this cluster whose CPU usage is 41 - 50 percent. This is not available in the UI by default. It can be made available through dynamic configuration.
• The type is int.
• The unit is servers.

Servers utilizing 51-60 Percent

• The number of servers in this cluster whose CPU usage is 51 - 60 percent. This is not available in the UI by default. It can be made available through dynamic configuration.
• The type is int.
• The unit is servers.

Servers utilizing 61-70 Percent

• The number of servers in this cluster whose CPU usage is 61 - 70 percent. This is not available in the UI by default. It can be made available through dynamic configuration.
• The type is int.
• The unit is servers.

Servers utilizing 81-90 Percent

• The number of servers in this cluster whose CPU usage is 81 - 90 percent. This is not available in the UI by default. It can be made available through dynamic configuration.
• The type is int.
• The unit is servers.

Servers utilizing 91-100 Percent

• The number of servers in this cluster whose CPU usage is 91 - 100 percent. This is not available in the UI by default. It can be made available through dynamic configuration.
• The type is int.
• The unit is servers.

Servers with 71-80 Percent Utilization

• The number of servers in this cluster whose CPU usage is 71 - 80 percent. This is not available in the UI by default. It can be made available through dynamic configuration.
• The type is int.
• The unit is servers.

Servers with Memory Utilization from 0-10 Percent

• The number of servers in this cluster whose memory usage is 0 - 10 percent. This is not available in the UI by default. It can be made available through dynamic configuration.
• The type is int.
• The unit is servers.

Servers with Memory Utilization from 11-20 Percent

• The number of servers in this cluster whose memory usage is 11 - 20 percent. This is not available in the UI by default. It can be made available through dynamic configuration.
• The type is int.
• The unit is servers.

Servers with Memory Utilization from 21-30 Percent

• The number of servers in this cluster whose memory usage is 21 - 30 percent. This is not available in the UI by default. It can be made available through dynamic configuration.
• The type is int.
• The unit is servers.

Servers with Memory Utilization from 31-40 Percent

• The number of servers in this cluster whose memory usage is 31 - 40 percent. This is not available in the UI by default. It can be made available through dynamic configuration.
• The type is int.
• The unit is servers.

Servers with Memory Utilization from 41-50 Percent

• The number of servers in this cluster whose memory usage is 41 - 50 percent. This is not available in the UI by default. It can be made available through dynamic configuration.
• The type is int.
• The unit is servers.

Servers with Memory Utilization from 51-60 Percent

• The number of servers in this cluster whose memory usage is 51 - 60 percent. This is not available in the UI by default. It can be made available through dynamic configuration.
• The type is int.
• The unit is servers.

Servers with Memory Utilization from 61-70 Percent

• The number of servers in this cluster whose memory usage is 61 - 70 percent. This is not available in the UI by default. It can be made available through dynamic configuration.
• The type is int.
• The unit is servers.

Servers with Memory Utilization from 71-80 Percent

• The number of servers in this cluster whose memory usage is 71 - 80 percent. This is not available in the UI by default. It can be made available through dynamic configuration.
• The type is int.
• The unit is servers.

Servers with Memory Utilization from 81-90 Percent

• The number of servers in this cluster whose memory usage is 81 - 90 percent. This is not available in the UI by default. It can be made available through dynamic configuration.
• The type is int.
• The unit is servers.

Servers with Memory Utilization from 91-100 Percent

• The number of servers in this cluster whose memory usage is 91 - 100 percent. This is not available in the UI by default. It can be made available through dynamic configuration.
• The type is int.
• The unit is servers.

Servers_In Maintenance Mode

• The number of ESX servers that are in maintenance mode. This is not available in the UI by default. It can be made available through dynamic configuration.
• The type is int.
• The unit is servers.

Total CPU (GHz)

• The total amount of CPU resources in GHz over all of the member servers in the cluster. This is not available in the UI by default. It can be made available through dynamic configuration.
• The type is double.
• The unit is gigahertz.

Total Memory (GB)

• The total memory capacity in GB over all of the member servers in the cluster. This is not available in the UI by default. It can be made available through dynamic configuration.
• The type is double.
• The unit is gigabytes.

Total_VM Configured Memory

• The total amount of memory in GB configured for all VMs in the cluster. This is not available in the UI by default. It can be made available through dynamic configuration.
• The type is double.
• The unit is gigabytes.

Total_VM Provisioned Space

• The total amount of space in GB that is provisioned for use by VMs in this cluster. This is not available in the UI by default. It can be made available through dynamic configuration.
• The type is double.
• The unit is gigabytes.

Dimensions

The following dimensions are available for the resource.

Cluster MORef

• The internal managed object reference name of this cluster.
• The type is string.

Cluster Name

• The name of the cluster.
• The type is string.

Cluster Node

• Cluster node.
• The type is string.

Current EVC Mode

• The current Enhanced VMotion Compatibility (EVC) mode of the cluster. This is not available in the UI by default. It can be made available through dynamic configuration.
• The type is string.

DataCenter

• The name of the data center that contains the cluster.
• The type is string.

Datacenter MORef

• The internal managed object reference name of the data center for this cluster. This is not available in the UI by default. It can be made available through dynamic configuration.
• The type is string.

DRS Enabled

• Indicates whether the VMware Dynamic Resource Scheduling facility is enabled for this cluster.
• The type is int.

HA Enabled

• Indicates whether the VMware High Availability feature is enabled for this cluster.
• The type is int.

Include Data In Summarization 0

• This attribute is only for IBM-internal use.Indicates whether to include certain attribute data (numbers) in Tivoli Data Warehouse summarization.The valid values are 0 (exclude) and 1 (include). This is available for thresholds, but not in the UI.
• The type is int.

Include Data In Summarization 1

• This attribute is only for IBM-internal use.Indicates whether to include certain attribute data (numbers) in Tivoli Data Warehouse summarization.The valid values are 0 (exclude) and 1 (include). This is available for thresholds, but not in the UI.
• The type is int.

Include Data In Summarization 10

• This attribute is only for IBM-internal use.Indicates whether to include certain attribute data (numbers) in Tivoli Data Warehouse summarization.The valid values are 0 (exclude) and 1 (include). This is available for thresholds, but not in the UI.
• The type is int.

Include Data In Summarization 2

• This attribute is only for IBM-internal use.Indicates whether to include certain attribute data (numbers) in Tivoli Data Warehouse summarization.The valid values are 0 (exclude) and 1 (include). This is available for thresholds, but not in the UI.
• The type is int.

Include Data In Summarization 3

• This attribute is only for IBM-internal use.Indicates whether to include certain attribute data (numbers) in Tivoli Data Warehouse summarization.The valid values are 0 (exclude) and 1 (include). This is available for thresholds, but not in the UI.
• The type is int.

Include Data In Summarization 4

• This attribute is only for IBM-internal use.Indicates whether to include certain attribute data (numbers) in Tivoli Data Warehouse summarization.The valid values are 0 (exclude) and 1 (include). This is available for thresholds, but not in the UI.
• The type is int.

Include Data In Summarization 5

• This attribute is only for IBM-internal use.Indicates whether to include certain attribute data (numbers) in Tivoli Data Warehouse summarization.The valid values are 0 (exclude) and 1 (include). This is available for thresholds, but not in the UI.
• The type is int.

Include Data In Summarization 6

• This attribute is only for IBM-internal use.Indicates whether to include certain attribute data (numbers) in Tivoli Data Warehouse summarization.The valid values are 0 (exclude) and 1 (include). This is available for thresholds, but not in the UI.
• The type is int.

Include Data In Summarization 7

• This attribute is only for IBM-internal use.Indicates whether to include certain attribute data (numbers) in Tivoli Data Warehouse summarization.The valid values are 0 (exclude) and 1 (include). This is available for thresholds, but not in the UI.
• The type is int.

Include Data In Summarization 8

• This attribute is only for IBM-internal use.Indicates whether to include certain attribute data (numbers) in Tivoli Data Warehouse summarization.The valid values are 0 (exclude) and 1 (include). This is available for thresholds, but not in the UI.
• The type is int.

Include Data In Summarization 9

• This attribute is only for IBM-internal use.Indicates whether to include certain attribute data (numbers) in Tivoli Data Warehouse summarization.The valid values are 0 (exclude) and 1 (include). This is available for thresholds, but not in the UI.
• The type is int.

Number CPUs

• The number of physical CPU cores across the cluster. This is not available in the UI by default. It can be made available through dynamic configuration.
• The type is int.

Number Servers

• The number of ESX servers that are members of this cluster.
• The type is int.

Overall Status

• The overall alarm status of the cluster. A value of red or yellow indicates that an alarm has been triggered for the cluster.
• The type is string.

Time Stamp

• This is the local time when the data was collected. This is available for thresholds, but not in the UI.
• The type is timestamp.

Component: Clustered Data Stores

This attribute group describes the data stores that are used by a cluster. The following section lists the metrics and dimensions of Component Clustered Data Stores.

Metrics

The following metrics are available for the component.

Data Store Percent Overcommitted

• The percentage of the total capacity of the datastore that is overcommitted.This attribute has a lower bound of -100% and no upper bound.
• The type is double.
• The unit is percent.

Data Store Percent Used

• The percentage of used space in the data store.
• The type is int.
• The unit is percent.

Dimensions

The following dimensions are available for the component.

Data Store Accessibility

• Whether the data store is accessible or not.
• The type is int.

Data Store Cluster

• The name of the cluster.
• The type is string.

Data Store Cluster MORef

• The internal managed object reference name of this cluster.
• The type is string.

Data Store Connected Hosts

• The number of hosts that are connected to the data store. This is not available in the UI by default. It can be made available through dynamic configuration.
• The type is int.

Data Store Connected VMs

• The number of virtual machines that are connected to the data store.
• The type is int.

Data Store Datacenter

• The name of the data center that contains the cluster.
• The type is string.

Data Store Datastore

• The name of the data store.
• The type is string.

Data Store Include Data In Summarization 0

• This attribute is only for IBM-internal use.Indicates whether to include certain attribute data (numbers) in Tivoli Data Warehouse summarization.The valid values are 0 (exclude) and 1 (include). This is available for thresholds, but not in the UI.
• The type is int.

Data Store Managed System Name

• The managed system name of the storage monitoring agent that is associated with the data. This is not available in the UI by default. It can be made available through dynamic configuration.
• The type is string.

Data Store node

• node.
• The type is string.

Data Store Node Id

• This attribute is only for IBM-internal use.
• The type is string.

Data Store Overall Status

• The overall alarm status of the data store. A value of red or yellow indicates that an alarm has been triggered for the data store.
• The type is string.

Data Store Remote Host Address

• The remote host address for the data store. This is not available in the UI by default. It can be made available through dynamic configuration.
• The type is string.

Data Store Storage Capacity

• The storage capacity in MB of the data store.
• The type is int.

Data Store Type

• The type for the data store.
• The type is string.

Time Stamp

• This is the local time when the data was collected. This is available for thresholds, but not in the UI.
• The type is timestamp.

Component: Clustered ESX Servers

This attribute group describes the ESX servers that are members of a cluster. The following section lists the metrics and dimensions of Component Clustered ESX Servers.

Metrics

The following metrics are available for the component.

ESX Server CPU Total Utilization

• The CPU usage of this server as a percentage of the total CPU resources that are owned by this cluster. This is not available in the UI by default. It can be made available through dynamic configuration.
• The type is int.
• The unit is percent.

ESX Server Memory Total Utilization

• The memory usage of this server as a percentage of the total memory resources that are owned by this cluster. This is not available in the UI by default. It can be made available through dynamic configuration.
• The type is int.
• The unit is percent.

ESX Server Server CPU Utilization

• The overall CPU usage of this ESX server.
• The type is int.
• The unit is usage.

ESX Server Server Memory Utilization

• The overall memory usage of this ESX server.
• The type is int.
• The unit is usage.

Dimensions

The following dimensions are available for the component.

ESX Server Cluster Name

• The name of the cluster.
• The type is string.

ESX Server CPU Effective Contribution

• The percentage of CPU resources that this server contributes to the effective CPU of the cluster. This is not available in the UI by default. It can be made available through dynamic configuration.
• The type is int.

ESX Server CPU Effective Utilization

• The CPU usage of this server as a percentage of the effective CPU resources that are owned by this cluster.
• The type is int.

ESX Server CPU Total Contribution

• The percentage of CPU resources that this server contributes to the total CPU of the cluster. This is not available in the UI by default. It can be made available through dynamic configuration.
• The type is int.

ESX Server DataCenter

• The name of the data center that contains the cluster.
• The type is string.

ESX Server Include Data In Summarization 0

• This attribute is only for IBM-internal use.Indicates whether to include certain attribute data (numbers) in Tivoli Data Warehouse summarization.The valid values are 0 (exclude) and 1 (include). This is available for thresholds, but not in the UI.
• The type is int.

ESX Server Include Data In Summarization 1

• This attribute is only for IBM-internal use.Indicates whether to include certain attribute data (numbers) in Tivoli Data Warehouse summarization.The valid values are 0 (exclude) and 1 (include). This is available for thresholds, but not in the UI.
• The type is int.

ESX Server Include Data In Summarization 2

• This attribute is only for IBM-internal use.Indicates whether to include certain attribute data (numbers) in Tivoli Data Warehouse summarization.The valid values are 0 (exclude) and 1 (include). This is available for thresholds, but not in the UI.
• The type is int.

ESX Server Mem Effective Contribution

• The percentage of memory resources that this server contributes to the effective memory of the cluster. This is not available in the UI by default. It can be made available through dynamic configuration.
• The type is int.

ESX Server Mem Total Contribution

• The percentage of memory resources that this server contributes to the total memory of the cluster. This is not available in the UI by default. It can be made available through dynamic configuration.
• The type is int.

ESX Server Memory Effective Utilization

• The memory usage of this server as a percentage of the effective memory resources that are owned by this cluster.
• The type is int.

ESX Server MSN Name

• The managed system name that is associated with the data.
• The type is string.

ESX Server node

• node.
• The type is string.

ESX Server Overall Status

• The overall alarm status of the ESX server. A value of red or yellow indicates that an alarm has been triggered for the ESX server.
• The type is string.

ESX Server Server Hostname

• The host name of the ESX server that is a member of this cluster.
• The type is string.

Time Stamp

• This is the local time when the data was collected. This is available for thresholds, but not in the UI.
• The type is timestamp.

Component: Clustered Virtual Machines

This attribute group describes the virtual machines that are members of a cluster. The following section lists the metrics and dimensions of Component Clustered Virtual Machines.

Metrics

The following metrics are available for the component.

Clustered VM CPU Utilization

• The overall CPU usage of this virtual machine during the collection interval. This metric is calculated by using the values of the actual used CPU and allocated CPU usage. Actual used CPU is based on the usage of the operating system and contribution of the ESX host. If the actual used CPU is greater than the allocated CPU usage, then the percentage CPU utilization exceeds 100%.
• The type is int.
• The unit is percent.

Clustered VM Memory Utilization

• The overall active usage of the guest memory of this virtual machine during the collection interval.This value is calculated as the percentage of active guest memory that is utilized out of the configured memory size of the virtual machine.
• The type is int.
• The unit is percent.

Dimensions

The following dimensions are available for the component.

Clustered VM Cluster MORef

• The internal managed object reference name of this cluster.
• The type is string.

Clustered VM Cluster Name

• The name of the cluster.
• The type is string.

Clustered VM DataCenter

• The name of the data center that contains the cluster.
• The type is string.

Clustered VM Include Data In Summarization 0

• This attribute is only for IBM-internal use.Indicates whether to include certain attribute data (numbers) in Tivoli Data Warehouse summarization.The valid values are 0 (exclude) and 1 (include). This is available for thresholds, but not in the UI.
• The type is int.

Clustered VM MSN Name

• The managed system name that is associated with the data.
• The type is string.

Clustered VM node

• node.
• The type is string.

Clustered VM Node Id

• This attribute is only for IBM-internal use.
• The type is string.

Clustered VM Overall Status

• The overall alarm status of the virtual machine. A value of red or yellow indicates that an alarm has been triggered for the virtual machine.
• The type is string.

Clustered VM VM Name

• The user-defined display name of this virtual machine.
• The type is string.

Time Stamp

• This is the local time when the data was collected. This is available for thresholds, but not in the UI.
• The type is timestamp.

Resource vmDataCenter

This attribute group contains information about the data centers in the virtual infrastructure. The following section lists the metrics, dimensions and components of Resource vmDataCenter.

Metrics

The following metrics are available for the resource.

Datacenter CPU Utilization

• The percent of available CPU being used in this data center.
• The type is double.
• The unit is percent.

Datacenter Effective CPU

• The total amount of effective CPU of this data center in MHz.
• The type is int.
• The unit is megahertz.

Datacenter Effective Memory

• The total amount of effective memory of this data center in MB.
• The type is int.
• The unit is megabytes.

Datacenter Effective Servers

• The total number of effective servers that are members of this data center.
• The type is int.
• The unit is servers.

Datacenter Memory Utilization

• The percent of available memory being used in this data center.
• The type is double.
• The unit is percent.

Datacenter Percent_Effective_Servers

• The percent of servers that are effective for this data center.
• The type is double.
• The unit is percent.

Datacenter Total CPU

• The total amount of CPU of this data center in MHz.
• The type is int.
• The unit is megahertz.

Datacenter Total Memory

• The total amount of memory of this data center in MB.
• The type is int.
• The unit is megabytes.

Datacenter Total Servers

• The total numbers of servers that are members of this data center.
• The type is int.
• The unit is servers.

Dimensions

The following dimensions are available for the resource.

Datacenter Include Data In Summarization 0

• This attribute is only for IBM-internal use.Indicates whether to include certain attribute data (numbers) in Tivoli Data Warehouse summarization.The valid values are 0 (exclude) and 1 (include). This is available for thresholds, but not in the UI.
• The type is int.

Datacenter Include Data In Summarization 1

• This attribute is only for IBM-internal use.Indicates whether to include certain attribute data (numbers) in Tivoli Data Warehouse summarization.The valid values are 0 (exclude) and 1 (include). This is available for thresholds, but not in the UI.
• The type is int.

Datacenter Include Data In Summarization 2

• This attribute is only for IBM-internal use.Indicates whether to include certain attribute data (numbers) in Tivoli Data Warehouse summarization.The valid values are 0 (exclude) and 1 (include). This is available for thresholds, but not in the UI.
• The type is int.

Datacenter Include Data In Summarization 3

• This attribute is only for IBM-internal use.Indicates whether to include certain attribute data (numbers) in Tivoli Data Warehouse summarization.The valid values are 0 (exclude) and 1 (include). This is available for thresholds, but not in the UI.
• The type is int.

Datacenter Name

• The name of this data center.
• The type is string.

Datacenter node

• Datacenter node.
• The type is string.

Datacenter Node Id

• This attribute is only for IBM-internal use. This is available for thresholds, but not in the UI.
• The type is string.

Datacenter Overall Status

• The overall alarm status of the datacenter. A value of red or yellow indicates that an alarm has been triggered for the datacenter. This is not available in the UI by default. It can be made available through dynamic configuration.
• The type is string.

Time Stamp

• This is the local time when the data was collected. This is available for thresholds, but not in the UI.
• The type is timestamp.

Resource vmDataStore

This resource type is for VMware Datastores. The following section lists the metrics, dimensions and components of Resource vmDataStore.

Metrics

The following metrics are available for the resource.

Capacity

• The storage capacity in MB. This metric does not apply to floppy or CD drives.
• The type is int.
• The unit is megabytes.

Percent Free

• The percentage of unused space in this data store.
• The type is int.
• The unit is percent.

Percent Used

• The percentage of used space in the data store.
• The type is int.
• The unit is percent.

Read Latency

• The average amount of time (in milliseconds) taken for a read operation from the datastore.
• The type is int.
• The unit is milliseconds.

Used Space

• The amount of allocated storage in MB.
• The type is int.
• The unit is megabytes.

Write Latency

• The average amount of time (in milliseconds) taken for a write operation from the datastore.
• The type is int.
• The unit is milliseconds.

Dimensions

The following dimensions are available for the resource.

Agent MSN

• This attribute is only for IBM-internal use.
• The type is string.

Datastore MORef

• The internal managed object reference name of this datastore.
• The type is string.

Datastore Name

• The name of the data store.
• The type is string.

Datastore nodeid

• This attribute is only for IBM-internal use.
• The type is string.

Datastore Type

• The file system type of this data store: NFS or VMFS.
• The type is string.

datastore_node

• datastore_node.
• The type is string.

ESX Server Name

• The host name of the ESX server.
• The type is string.

Free Space

• The amount of available storage in MB.
• The type is string.

Include Data In Summarization 0

• This attribute is only for IBM-internal use.Indicates whether to include certain attribute data (numbers) in Tivoli Data Warehouse summarization.The valid values are 0 (exclude) and 1 (include). This is available for thresholds, but not in the UI.
• The type is string.

Include Data In Summarization 1

• This attribute is only for IBM-internal use.Indicates whether to include certain attribute data (numbers) in Tivoli Data Warehouse summarization.The valid values are 0 (exclude) and 1 (include). This is available for thresholds, but not in the UI.
• The type is int.

Maximum File Size

• The maximum size in KB of a file that might be allocated.
• The type is int.

Overall Status

• The overall alarm status of the datastore. A value of red or yellow indicates that an alarm has been triggered for the datastore.
• The type is string.

Server Datacenter

• The name of this datacenter.
• The type is string.

Time Stamp

• This is the local time when the data was collected. This is available for thresholds, but not in the UI.
• The type is timestamp.

Resource vmESXServer

This attribute group contains basic information about an ESX server. The following section lists the metrics, dimensions and components of Resource vmESXServer.

Metrics

The following metrics are available for the resource.

CloneFrom Snapshot-Supported

• Indicates whether cloning a virtual machine from a snapshot point is allowed.
• The type is int.
• The unit is number.

ESX Server Average_VM CPU_Percent_Ready

• The average of all CPU percent ready values for all the virtual machines on this ESX server.
• The type is double.
• The unit is percent.

ESX Server Demand

• The average active CPU load (in MHz) for the last minute.
• The type is int.
• The unit is megahertz/minute.

ESX Server Energy Usage

• The amount of energy (in joules) that is used since the host system was started. This is not available in the UI by default. It can be made available through dynamic configuration.
• The type is int.
• The unit is joules.

ESX Server Latency

• The amount of time (in percentage) that the resource pool waits in the ready state and is not scheduled because of a CPU resource contention. This is not available in the UI by default. It can be made available through dynamic configuration.
• The type is double.
• The unit is percent.

ESX Server Overall CPU_Util

• The overall CPU usage of the server.
• The type is int.
• The unit is usage.

ESX Server Overall Memory_Util

• The overall memory usage of the server.
• The type is int.
• The unit is usage.

ESX Server Performance Error_Pct

• The percentage of performance monitoring API calls against this host that failed during their last execution. This is not available in the UI by default. It can be made available through dynamic configuration.
• The type is double.
• The unit is percent.

ESX Server Performance Error_Rate

• The error rate of performance monitoring API calls against this host over a configured interval. This is not available in the UI by default. It can be made available through dynamic configuration.
• The type is int.
• The unit is calls.

ESX Server Physical Memory

• The amount of physical memory on this server in MB. This is not available in the UI by default. It can be made available through dynamic configuration.
• The type is int.
• The unit is megabytes.

ESX Server Power Usage

• The amount of power (in watts) that is currently used. This is not available in the UI by default. It can be made available through dynamic configuration.
• The type is int.
• The unit is watts.

ESX Server Storage_Adapter Max Latency

• The highest latency (in milliseconds) across all the storage adapters that are used by the host. This is not available in the UI by default. It can be made available through dynamic configuration.
• The type is int.
• The unit is milliseconds.

ESX Server Storage_Path Max Latency

• The highest latency (in milliseconds) across all the storage paths that are used by the host. This is not available in the UI by default. It can be made available through dynamic configuration.
• The type is int.
• The unit is milliseconds.

ESX Server System Up_Time

• The number of seconds since the server was started. This is not available in the UI by default. It can be made available through dynamic configuration.
• The type is int.
• The unit is seconds.

ESX Server Total CPU_MHz

• The total amount of the CPU of the server in MHz.
• The type is int.
• The unit is megahertz.

ESX Server Used CPU_MHz

• The amount of the CPU (in MHz) that is used by the server.
• The type is int.
• The unit is megahertz.

Fault Tolerance-Supported

• Indicates whether the host supports fault tolerance.
• The type is int.
• The unit is number.

HBA Count

• The number of Host Bus Adapters (HBAs).
• The type is int.
• The unit is number.

SSH Status

• The SSH service status of the ESX Server. The value Up indicates that the service is running. The value Down indicates that the service has stopped, Unknown Host indicates that the server is unreachable, and Unavailable indicates that the service status is unknown.
• The type is int.
• The unit is number.

Dimensions

The following dimensions are available for the resource.

DataCenter for the ESX Server

• The name of the data center for this server.
• The type is string.

ESX Server Associate Cluster

• The name of the cluster that this server is a member of or unavailable if not a member of any cluster.
• The type is string.

ESX Server BIOS Date

• The date of release for this system's BIOS. This is not available in the UI by default. It can be made available through dynamic configuration.
• The type is date.

ESX Server Build number

• The VMware product build number for the installed level of ESX. This is not available in the UI by default. It can be made available through dynamic configuration.
• The type is string.

ESX Server Connection State

• The connection state of the server.
• The type is string.

ESX Server CPU Packages

• The number of CPU packages for this host. This is not available in the UI by default. It can be made available through dynamic configuration.
• The type is int.

ESX Server Current EVC Mode

• The current Enhanced VMotion Compatibility (EVC) mode of the host system. This is not available in the UI by default. It can be made available through dynamic configuration.
• The type is string.

ESX Server Datacenter MORef

• The internal managed object reference name of the data center for this server. This is not available in the UI by default. It can be made available through dynamic configuration.
• The type is string.

ESX Server Datastore Space

• The total capacity in GB of the data stores connected to this server. This is across all of the data stores that this server is configured to use. This is not available in the UI by default. It can be made available through dynamic configuration.
• The type is int.

ESX Server Datastore Used

• The total amount of datastore storage in GB that is actually in use by this server. This is across all of the data stores that this server is configured to use. This is not available in the UI by default. It can be made available through dynamic configuration.
• The type is int.

ESX Server Fully Qualified_Name

• This host's fully qualified name.
• The type is string.

ESX Server Host Name

• The host name of the ESX server.
• The type is string.

ESX Server HyperThreading Enabled

• Whether hyperthreading is enabled on this server. This is not available in the UI by default. It can be made available through dynamic configuration.
• The type is int.

ESX Server Include Data In Summarization 0

• This attribute is only for IBM-internal use.Indicates whether to include certain attribute data (numbers) in Tivoli Data Warehouse summarization.The valid values are 0 (exclude) and 1 (include). This is available for thresholds, but not in the UI.
• The type is int.

ESX Server Include Data In Summarization 1

• This attribute is only for IBM-internal use.Indicates whether to include certain attribute data (numbers) in Tivoli Data Warehouse summarization.The valid values are 0 (exclude) and 1 (include). This is available for thresholds, but not in the UI.
• The type is int.

ESX Server Include Data In Summarization 2

• This attribute is only for IBM-internal use.Indicates whether to include certain attribute data (numbers) in Tivoli Data Warehouse summarization.The valid values are 0 (exclude) and 1 (include). This is available for thresholds, but not in the UI.
• The type is int.

ESX Server Include Data In Summarization 3

• This attribute is only for IBM-internal use.Indicates whether to include certain attribute data (numbers) in Tivoli Data Warehouse summarization.The valid values are 0 (exclude) and 1 (include). This is available for thresholds, but not in the UI.
• The type is int.

ESX Server Include Data In Summarization 4

• This attribute is only for IBM-internal use.Indicates whether to include certain attribute data (numbers) in Tivoli Data Warehouse summarization.The valid values are 0 (exclude) and 1 (include). This is available for thresholds, but not in the UI.
• The type is int.

ESX Server Include Data In Summarization 5

• This attribute is only for IBM-internal use.Indicates whether to include certain attribute data (numbers) in Tivoli Data Warehouse summarization.The valid values are 0 (exclude) and 1 (include). This is available for thresholds, but not in the UI.
• The type is int.

ESX Server Include Data In Summarization 6

• This attribute is only for IBM-internal use.Indicates whether to include certain attribute data (numbers) in Tivoli Data Warehouse summarization.The valid values are 0 (exclude) and 1 (include). This is available for thresholds, but not in the UI.
• The type is int.

ESX Server Include Data In Summarization 7

• This attribute is only for IBM-internal use.Indicates whether to include certain attribute data (numbers) in Tivoli Data Warehouse summarization.The valid values are 0 (exclude) and 1 (include). This is available for thresholds, but not in the UI.
• The type is int.

ESX Server Include Data In Summarization 8

• This attribute is only for IBM-internal use.Indicates whether to include certain attribute data (numbers) in Tivoli Data Warehouse summarization.The valid values are 0 (exclude) and 1 (include). This is available for thresholds, but not in the UI.
• The type is int.

ESX Server Include Data In Summarization 9

• This attribute is only for IBM-internal use.Indicates whether to include certain attribute data (numbers) in Tivoli Data Warehouse summarization.The valid values are 0 (exclude) and 1 (include). This is available for thresholds, but not in the UI.
• The type is int.

ESX Server IP Address

• The IP address of the host system. This is not available in the UI by default. It can be made available through dynamic configuration.
• The type is string.

ESX Server Maintenance Mode

• Whether this server is in maintenance mode. This is not available in the UI by default. It can be made available through dynamic configuration.
• The type is int.

ESX Server Max EVC Mode

• The maximum Enhanced VMotion Compatibility (EVC) mode of the host system. This is not available in the UI by default. It can be made available through dynamic configuration.
• The type is string.

ESX Server NIC Interfaces

• The number of NIC interfaces on this server.
• The type is int.

ESX Server node

• node.
• The type is string.

ESX Server Node Id

• This attribute is only for IBM-internal use.
• The type is string.

ESX Server Number of VMs

• The number of virtual machines configured on this server.
• The type is int.

ESX Server Number VMs_On

• The number of virtual machines configured on this server that are powered on. This is not available in the UI by default. It can be made available through dynamic configuration.
• The type is int.

ESX Server Overall Status

• The overall alarm status of the server. A value of red or yellow indicates that an alarm has been triggered for the server.
• The type is string.

ESX Server Physical CPUs

• The number of physical CPUs on this server.
• The type is int.

ESX Server Power Capacity

• The maximum amount of power (in watts) that can be used. This is not available in the UI by default. It can be made available through dynamic configuration.
• The type is int.

ESX Server Power State

• The power status of the host system.The valid values are POWERED_OFF, POWERED_ON, STAND_BY, and UNKNOWN.
• The type is string.

ESX Server Processor Family

• The processor family of this host's CPUs. This is not available in the UI by default. It can be made available through dynamic configuration.
• The type is string.

ESX Server Product

• The VMware product string for the installed level of ESX. This is not available in the UI by default. It can be made available through dynamic configuration.
• The type is string.

ESX Server Serial Number

• The serial number of the hardware of the host system. This is not available in the UI by default. It can be made available through dynamic configuration.
• The type is string.

ESX Server System Model

• The system model of this host. This is not available in the UI by default. It can be made available through dynamic configuration.
• The type is string.

ESX Server System Vendor

• The system vendor of this host. This is not available in the UI by default. It can be made available through dynamic configuration.
• The type is string.

ESX Server Total_VM Configured Memory

• The total amount of memory in GB configured for all VMs on this server,. This is not available in the UI by default. It can be made available through dynamic configuration.
• The type is double.

ESX Server Total_VM Provisioned Space

• The total amount of space in GB, that has been provisioned for use by VMs on this server. This is not available in the UI by default. It can be made available through dynamic configuration.
• The type is double.

ESX Server UUID

• The UUID of the server. This is available for thresholds, but not in the UI.
• The type is string.

ESX Server Version

• The VMware product version for the installed level of ESX.
• The type is string.

ESX Server vMotion enabled

• A flag to indicate whether vMotion is configured on this server. This is not available in the UI by default. It can be made available through dynamic configuration.
• The type is string.

Time Stamp

• This is the local time when the data was collected. This is available for thresholds, but not in the UI.
• The type is timestamp.

Component: Data Stores

Information about data stores for a server. The following section lists the metrics and dimensions of Component Data Stores.

Metrics

The following metrics are available for the component.

Data Store Percent Free

• The percentage of unused space in this data store. This is not available in the UI by default. It can be made available through dynamic configuration.
• The type is int.
• The unit is percent.

Data Store Percent Used

• The percentage of used space in the data store.
• The type is int.
• The unit is percent.

Data Store Read Latency

• The average amount of time (in milliseconds) taken for a read operation from the datastore.
• The type is int.
• The unit is milliseconds.

Data Store Storage Capacity

• The storage capacity in MB. This metric does not apply to floppy or CD drives.
• The type is int.
• The unit is megabytes.

Data Store Used Space

• The amount of allocated storage in MB. This is not available in the UI by default. It can be made available through dynamic configuration.
• The type is int.
• The unit is megabytes.

Data Store Write Latency

• The average amount of time (in milliseconds) taken for a write operation from the datastore.
• The type is int.
• The unit is milliseconds.

Dimensions

The following dimensions are available for the component.

Data Store Agent MSN

• This attribute is only for IBM-internal use.
• The type is string.

Data Store Datastore MORef

• The internal managed object reference name of this datastore. This is not available in the UI by default. It can be made available through dynamic configuration.
• The type is string.

Data Store dataStores Node

• dataStores Node.
• The type is string.

Data Store File System Type

• The file system type of this data store: NFS or VMFS.
• The type is string.

Data Store Free Space

• The amount of available storage in MB. This is not available in the UI by default. It can be made available through dynamic configuration.
• The type is int.

Data Store Host Name of ESX Server

• The host name of the ESX server.
• The type is string.

Data Store Include Data In Summarization 0

• This attribute is only for IBM-internal use.Indicates whether to include certain attribute data (numbers) in Tivoli Data Warehouse summarization.The valid values are 0 (exclude) and 1 (include). This is available for thresholds, but not in the UI.
• The type is int.

Data Store Include Data In Summarization 1

• This attribute is only for IBM-internal use.Indicates whether to include certain attribute data (numbers) in Tivoli Data Warehouse summarization.The valid values are 0 (exclude) and 1 (include). This is available for thresholds, but not in the UI.
• The type is int.

Data Store Maximum File Size

• The maximum size in KB of a file that might be allocated. This is not available in the UI by default. It can be made available through dynamic configuration.
• The type is int.

Data Store Name

• The name of the data store.
• The type is string.

Data Store Name of Datacenter

• The name of this datacenter.
• The type is string.

Data Store Node Id

• This attribute is only for IBM-internal use.
• The type is string.

Data Store Overall Status

• The overall alarm status of the datastore. A value of red or yellow indicates that an alarm has been triggered for the datastore.
• The type is string.

Time Stamp

• This is the local time when the data was collected. This is available for thresholds, but not in the UI.
• The type is timestamp.

Component: Disk Usage for a Server

Information about disk usage for a server. The following section lists the metrics and dimensions of Component Disk Usage for a Server.

Metrics

The following metrics are available for the component.

Disk Bus Resets

• The number of bus resets in the performance interval. This is not available in the UI by default. It can be made available through dynamic configuration.
• The type is int.
• The unit is resets.

Disk Commands Aborted

• The number of disk commands stopped during the performance interval. This is not available in the UI by default. It can be made available through dynamic configuration.
• The type is int.
• The unit is commands.

Disk Device Latency

• The average amount of time in milliseconds to complete an operation by the physical device. This is not available in the UI by default. It can be made available through dynamic configuration.
• The type is int.
• The unit is milliseconds.

Disk Device Read Latency

• The average amount of time in milliseconds that a read operation took by the physical device. This is not available in the UI by default. It can be made available through dynamic configuration.
• The type is int.
• The unit is milliseconds.

Disk Device Total Latency

• The sum of the average amount of time in milliseconds to complete read and write operations by the physical device. This is not available in the UI by default. It can be made available through dynamic configuration.
• The type is int.
• The unit is milliseconds.

Disk Device Write Latency

• The average amount of time in milliseconds that a write operation took by the physical device. This is not available in the UI by default. It can be made available through dynamic configuration.
• The type is int.
• The unit is milliseconds.

Disk Kernel Latency

• The average amount of time in milliseconds to complete an operation by the VMware kernel. This is not available in the UI by default. It can be made available through dynamic configuration.
• The type is int.
• The unit is milliseconds.

Disk Kernel Read Latency

• The average amount of time in milliseconds that a read operation took by the VMware kernel. This is not available in the UI by default. It can be made available through dynamic configuration.
• The type is int.
• The unit is milliseconds.

Disk Kernel Total Latency

• The sum of the average amount of time in milliseconds to complete read and write an operations by the VMware kernel. This is not available in the UI by default. It can be made available through dynamic configuration.
• The type is int.
• The unit is milliseconds.

Disk Kernel Write Latency

• The average amount of time in milliseconds that a write operation took by the VMware kernel. This is not available in the UI by default. It can be made available through dynamic configuration.
• The type is int.
• The unit is milliseconds.

Disk Number of Disk Commands

• The number of disk commands issued during the performance interval. This is not available in the UI by default. It can be made available through dynamic configuration.
• The type is int.
• The unit is commands.

Disk Number of Read Operations

• The number of read operations on the disk in the performance interval. This is not available in the UI by default. It can be made available through dynamic configuration.
• The type is int.
• The unit is reads.

Disk Number of Write Operations

• The number of write operations on the disk in the performance interval. This is not available in the UI by default. It can be made available through dynamic configuration.
• The type is int.
• The unit is writes.

Disk Queue Latency

• The average amount of time in milliseconds spent in the queue for the VMware kernel per IO command. This is not available in the UI by default. It can be made available through dynamic configuration.
• The type is int.
• The unit is milliseconds.

Disk Queue Read Latency

• The average amount of time in milliseconds that a read operation spent in the queue for the VMware kernel. This is not available in the UI by default. It can be made available through dynamic configuration.
• The type is int.
• The unit is milliseconds.

Disk Queue Total Latency

• The sum of the average amount of time in milliseconds spent in the queue for reads and writes in the VMware kernel per IO command. This is not available in the UI by default. It can be made available through dynamic configuration.
• The type is int.
• The unit is milliseconds.

Disk Queue Write Latency

• The average amount of time in milliseconds that a write operation spent in the queue for the VMware kernel. This is not available in the UI by default. It can be made available through dynamic configuration.
• The type is int.
• The unit is milliseconds.

Disk Sample Time Read Rate

• The amount of data read in the interval for this disk in KBps. This is not available in the UI by default. It can be made available through dynamic configuration.
• The type is int.
• The unit is kilobytes/second.

Disk Sample Write Rate

• The amount of data written in the interval for this disk in KB per second. This is not available in the UI by default. It can be made available through dynamic configuration.
• The type is int.
• The unit is kilobytes/second.

Disk Total Latency

• The average total amount of time spent on an IO operation for both the physical and kernel layers. This is not available in the UI by default. It can be made available through dynamic configuration.
• The type is int.
• The unit is milliseconds.

Disk Total Read Latency

• The average total amount of time in milliseconds spent on a read operation for both the physical and kernel layers. This is not available in the UI by default. It can be made available through dynamic configuration.
• The type is int.
• The unit is milliseconds.

Disk Total Write Latency

• The average total amount of time in milliseconds spent on a write operation for both the physical and kernel layers. This is not available in the UI by default. It can be made available through dynamic configuration.
• The type is int.
• The unit is milliseconds.

Dimensions

The following dimensions are available for the component.

Disk Backing Datastore

• The name of the data store that backs this server disk if there is one. This is not available in the UI by default. It can be made available through dynamic configuration.
• The type is string.

Disk Host Name of ESX Server

• The host name of the ESX server. This is not available in the UI by default. It can be made available through dynamic configuration.
• The type is string.

Disk Include Data In Summarization 0

• This attribute is only for IBM-internal use.Indicates whether to include certain attribute data (numbers) in Tivoli Data Warehouse summarization.The valid values are 0 (exclude) and 1 (include). This is available for thresholds, but not in the UI.
• The type is int.

Disk Include Data In Summarization 1

• This attribute is only for IBM-internal use.Indicates whether to include certain attribute data (numbers) in Tivoli Data Warehouse summarization.The valid values are 0 (exclude) and 1 (include). This is available for thresholds, but not in the UI.
• The type is int.

Disk Include Data In Summarization 2

• This attribute is only for IBM-internal use.Indicates whether to include certain attribute data (numbers) in Tivoli Data Warehouse summarization.The valid values are 0 (exclude) and 1 (include). This is available for thresholds, but not in the UI.
• The type is int.

Disk Include Data In Summarization 3

• This attribute is only for IBM-internal use.Indicates whether to include certain attribute data (numbers) in Tivoli Data Warehouse summarization.The valid values are 0 (exclude) and 1 (include). This is available for thresholds, but not in the UI.
• The type is int.

Disk Include Data In Summarization 4

• This attribute is only for IBM-internal use.Indicates whether to include certain attribute data (numbers) in Tivoli Data Warehouse summarization.The valid values are 0 (exclude) and 1 (include). This is available for thresholds, but not in the UI.
• The type is int.

Disk Include Data In Summarization 5

• This attribute is only for IBM-internal use.Indicates whether to include certain attribute data (numbers) in Tivoli Data Warehouse summarization.The valid values are 0 (exclude) and 1 (include). This is available for thresholds, but not in the UI.
• The type is int.

Disk Include Data In Summarization 6

• This attribute is only for IBM-internal use.Indicates whether to include certain attribute data (numbers) in Tivoli Data Warehouse summarization.The valid values are 0 (exclude) and 1 (include). This is available for thresholds, but not in the UI.
• The type is int.

Disk node

• node. This is not available in the UI by default. It can be made available through dynamic configuration.
• The type is string.

Disk Node Id

• This attribute is only for IBM-internal use. This is not available in the UI by default. It can be made available through dynamic configuration.
• The type is string.

Disk Virtual Disk Name

• The name of a virtual disk on the server. This is not available in the UI by default. It can be made available through dynamic configuration.
• The type is string.

Time Stamp

• This is the local time when the data was collected. This is available for thresholds, but not in the UI.
• The type is timestamp.

Component: Host Bus Adapters

Information about the host bus adapters (HBA) of the server. The following section lists the metrics and dimensions of Component Host Bus Adapters.

Metrics

The following metrics are available for the component.

Host Bus Adapter Current Link Speed

• The current operating link speed (in megabits per second) of the port.This attribute is available for the HostInternetScsiHba HBA type. This is not available in the UI by default. It can be made available through dynamic configuration.
• The type is int.
• The unit is megabits/second.

Host Bus Adapter Read Average

• The average amount of data that is read (in KB per second) by the storage adapter. This is not available in the UI by default. It can be made available through dynamic configuration.
• The type is int.
• The unit is kilobytes/second.

Host Bus Adapter Read Latency

• The average amount of time (in milliseconds) over a given sample interval that the storage adapter consumes for a read operation to complete.This average amount of time is the sum of kernel latency and device latency. This is not available in the UI by default. It can be made available through dynamic configuration.
• The type is int.
• The unit is milliseconds.

Host Bus Adapter Speed

• The current operating speed (in KB per second) of the adapter.This attribute is available for the HostFibreChannelHba HBA type. This is not available in the UI by default. It can be made available through dynamic configuration.
• The type is int.
• The unit is kilobytes/second.

Host Bus Adapter Storage Adapter Throughput Usage

• The I/O rate (in KB per second) of the storage adapter. This is not available in the UI by default. It can be made available through dynamic configuration.
• The type is int.
• The unit is kilobytes/second.

Host Bus Adapter Write Latency

• The average amount of time (in milliseconds) over a given sample interval that the storage adapter consumes for a write operation to complete.This average amount of time is the sum of kernel latency and device latency. This is not available in the UI by default. It can be made available through dynamic configuration.
• The type is int.
• The unit is milliseconds.

Host Bus Adapter Write Rate

• The average amount of data that is written (in KB per second) by the storage adapter. This is not available in the UI by default. It can be made available through dynamic configuration.
• The type is int.
• The unit is kilobytes/second.

Dimensions

The following dimensions are available for the component.

Host Bus Adapter Bus Number of HBA

• The bus number of this HBA. This is not available in the UI by default. It can be made available through dynamic configuration.
• The type is int.

Host Bus Adapter Device Name of HBA

• The device name of this HBA. This is not available in the UI by default. It can be made available through dynamic configuration.
• The type is string.

Host Bus Adapter Driver

• The driver being used for this HBA. This is not available in the UI by default. It can be made available through dynamic configuration.
• The type is string.

Host Bus Adapter HBA_Type

• The type of Host Bus Adapter (HBA).The valid values are HostBlockHba, HostFibreChannelHba, HostInternetScsiHba, and HostParallelScsiHba. This is not available in the UI by default. It can be made available through dynamic configuration.
• The type is string.

Host Bus Adapter Host Name

• The host name of the ESX server. This is not available in the UI by default. It can be made available through dynamic configuration.
• The type is string.

Host Bus Adapter Include Data In Summarization 0

• This attribute is only for IBM-internal use.Indicates whether to include certain attribute data (numbers) in Tivoli Data Warehouse summarization.The valid values are 0 (exclude) and 1 (include). This is not available in the UI by default. It can be made available through dynamic configuration.
• The type is int.

Host Bus Adapter Include Data In Summarization 1

• This attribute is only for IBM-internal use.Indicates whether to include certain attribute data (numbers) in Tivoli Data Warehouse summarization.The valid values are 0 (exclude) and 1 (include). This is not available in the UI by default. It can be made available through dynamic configuration.
• The type is int.

Host Bus Adapter Max Link Speed

• The maximum supported link speed (in megabits per second) of the port.This attribute is available for the HostInternetScsiHba HBA type. This is not available in the UI by default. It can be made available through dynamic configuration.
• The type is int.

Host Bus Adapter Model

• The model string for this HBA. This is not available in the UI by default. It can be made available through dynamic configuration.
• The type is string.

Host Bus Adapter Node Id

• This attribute is only for IBM-internal use. This is not available in the UI by default. It can be made available through dynamic configuration.
• The type is string.

Host Bus Adapter Operational Status

• The operational status for this HBA. This is not available in the UI by default. It can be made available through dynamic configuration.
• The type is string.

Host Bus Adapter PCI ID for HBA

• The PCI ID for this HBA. This is not available in the UI by default. It can be made available through dynamic configuration.
• The type is string.

Host Bus Adapters node

• Host Bus Adapters node. This is not available in the UI by default. It can be made available through dynamic configuration.
• The type is string.

Time Stamp

• This is the local time when the data was collected. This is available for thresholds, but not in the UI.
• The type is timestamp.

Component: Network Usage

Information about network usage for a server. The following section lists the metrics and dimensions of Component Network Usage.

Metrics

The following metrics are available for the component.

Network Data Transmitted

• The amount of data transmitted in the performance interval in KB per second.
• The type is int.
• The unit is kilobytes/second.

Network Link Speed

• The current operating speed of the NIC in MB per second (mbps).
• The type is int.
• The unit is megabytes/second.

Network Link Utilization

• The percent usage of the NIC relative to the capacity of the link (including duplex).
• The type is double.
• The unit is percent.

Network Pkts Dropped

• The number of packets dropped in the performance interval. This is not available in the UI by default. It can be made available through dynamic configuration.
• The type is int.
• The unit is packets.

Network Pkts Received

• The number of packets received in the performance interval.
• The type is int.
• The unit is packets.

Network Pkts Transmitted

• The number of packets transmitted in the performance interval.
• The type is int.
• The unit is packets.

Network Receive Pkts Dropped

• The number of receive packets dropped in the performance interval. This is not available in the UI by default. It can be made available through dynamic configuration.
• The type is int.
• The unit is packets.

Network Sample Data Received Rate

• The amount of data received in the performance interval in KB per second.
• The type is int.
• The unit is kilobytes/second.

Network Transmit Pkts Dropped

• The number of transmit packets dropped in the performance interval. This is not available in the UI by default. It can be made available through dynamic configuration.
• The type is int.
• The unit is packets.

Network Transmitted and Received Total/Sec

• The sum of data transmitted and received in the performance interval in KB per second.
• The type is int.
• The unit is kilobytes/second.

Dimensions

The following dimensions are available for the component.

Network Cluster Name

• The name of the cluster that this ESX server is a member of or unavailable if not a member of any cluster. This is not available in the UI by default. It can be made available through dynamic configuration.
• The type is string.

Network Datacenter Name

• The name of the data center this ESX Server is a member of. This is not available in the UI by default. It can be made available through dynamic configuration.
• The type is string.

Network Duplex

• The current operating mode of the NIC.
• The type is string.

Network Host Name of ESX Server

• The host name of the ESX server.
• The type is string.

Network Include Data In Summarization 0

• This attribute is only for IBM-internal use.Indicates whether to include certain attribute data (numbers) in Tivoli Data Warehouse summarization.The valid values are 0 (exclude) and 1 (include). This is available for thresholds, but not in the UI.
• The type is int.

Network Include Data In Summarization 1

• This attribute is only for IBM-internal use.Indicates whether to include certain attribute data (numbers) in Tivoli Data Warehouse summarization.The valid values are 0 (exclude) and 1 (include). This is available for thresholds, but not in the UI.
• The type is int.

Network Include Data In Summarization 2

• This attribute is only for IBM-internal use.Indicates whether to include certain attribute data (numbers) in Tivoli Data Warehouse summarization.The valid values are 0 (exclude) and 1 (include). This is available for thresholds, but not in the UI.
• The type is int.

Network Interface Name

• The name or label of this network interface.
• The type is string.

Network Node

• Network Node.
• The type is string.

Network Node Id

• This attribute is only for IBM-internal use. This is not available in the UI by default. It can be made available through dynamic configuration.
• The type is string.

Network Physical Address

• The physical address of this NIC. This is not available in the UI by default. It can be made available through dynamic configuration.
• The type is string.

Network Status

• The current status, up or down, of the NIC.
• The type is string.

Network Switch

• The name of the virtual switch that the NIC is configured with.
• The type is string.

Time Stamp

• This is the local time when the data was collected. This is available for thresholds, but not in the UI.
• The type is timestamp.

Component: Server CPU

Information about CPU usage for a server. The following section lists the metrics and dimensions of Component Server CPU.

Metrics

The following metrics are available for the component.

CPU Core Utilization

• The percentage of the CPU core that is currently utilized.A core is utilized if either a single or both the logical CPU cores are utilized when hyper-threading is enabled. This is not available in the UI by default. It can be made available through dynamic configuration.
• The type is double.
• The unit is percent.

CPU Usage

• The usage of this CPU. This is not available in the UI by default. It can be made available through dynamic configuration.
• The type is int.
• The unit is percent.

Dimensions

The following dimensions are available for the component.

CPU ESX Hostname

• The host name of the ESX server. This is not available in the UI by default. It can be made available through dynamic configuration.
• The type is string.

CPU Include Data In Summarization 0

• This attribute is only for IBM-internal use.Indicates whether to include certain attribute data (numbers) in Tivoli Data Warehouse summarization.The valid values are 0 (exclude) and 1 (include). This is available for thresholds, but not in the UI.
• The type is int.

CPU Include Data In Summarization 1

• This attribute is only for IBM-internal use.Indicates whether to include certain attribute data (numbers) in Tivoli Data Warehouse summarization.The valid values are 0 (exclude) and 1 (include). This is available for thresholds, but not in the UI.
• The type is int.

CPU node

• CPU node. This is not available in the UI by default. It can be made available through dynamic configuration.
• The type is string.

CPU Node Id

• This attribute is only for IBM-internal use. This is not available in the UI by default. It can be made available through dynamic configuration.
• The type is string.

CPU Number

• The number of this CPU. This is not available in the UI by default. It can be made available through dynamic configuration.
• The type is int.

Time Stamp

• This is the local time when the data was collected. This is available for thresholds, but not in the UI.
• The type is timestamp.

Component: Server Health

ESX server health information. The following section lists the metrics and dimensions of Component Server Health.

Metrics

The following metrics are available for the component.

Health Sensor Value

• The value of the sensor. This is not available in the UI by default. It can be made available through dynamic configuration.
• The type is double.
• The unit is value.

Dimensions

The following dimensions are available for the component.

Health Host Name of ESX Server

• The host name of the ESX server. This is not available in the UI by default. It can be made available through dynamic configuration.
• The type is string.

Health node

• Health node. This is not available in the UI by default. It can be made available through dynamic configuration.
• The type is string.

Health Node Id

• This attribute is only for IBM-internal use. This is not available in the UI by default. It can be made available through dynamic configuration.
• The type is string.

Health Sensor Name

• The name of the sensor. This is not available in the UI by default. It can be made available through dynamic configuration.
• The type is string.

Health Sensor Status

• The operational status of the sensor. This is not available in the UI by default. It can be made available through dynamic configuration.
• The type is string.

Health Sensor Type

• The type of sensor. This is not available in the UI by default. It can be made available through dynamic configuration.
• The type is string.

Health Sensor Units

• The units of Sensor_Value. This is not available in the UI by default. It can be made available through dynamic configuration.
• The type is string.

Time Stamp

• This is the local time when the data was collected. This is available for thresholds, but not in the UI.
• The type is timestamp.

Component: Server Memory

This attribute group contains information about memory usage for a server. The following section lists the metrics and dimensions of Component Server Memory.

Metrics

The following metrics are available for the component.

Memory Active Memory

• The amount of memory that is actively used in KB. This is not available in the UI by default. It can be made available through dynamic configuration.
• The type is int.
• The unit is kilobytes.

Memory Active Write

• The amount of memory (in KB) that is written to disk. This is not available in the UI by default. It can be made available through dynamic configuration.
• The type is int.
• The unit is kilobytes.

Memory Balloon Used

• The amount of memory used by the virtual machine memory control system in KB. This is not available in the UI by default. It can be made available through dynamic configuration.
• The type is int.
• The unit is kilobytes.

Memory Free Memory

• The amount of physical memory that is currently free in MB. This is not available in the UI by default. It can be made available through dynamic configuration.
• The type is int.
• The unit is megabytes.

Memory Granted Memory

• The amount of memory available for use in KB. This is not available in the UI by default. It can be made available through dynamic configuration.
• The type is int.
• The unit is kilobytes.

Memory Swap In Rate

• The rate at which memory is swapped in in kilobytes per second. This is not available in the UI by default. It can be made available through dynamic configuration.
• The type is int.
• The unit is kilobytes/second.

Memory Swap Out Rate

• The rate at which memory is swapped out in kilobytes per second. This is not available in the UI by default. It can be made available through dynamic configuration.
• The type is int.
• The unit is kilobytes/second.

Memory Swap Total Rate

• The total rate at which memory is swapped in or out in kilobytes per second. This is not available in the UI by default. It can be made available through dynamic configuration.
• The type is int.
• The unit is kilobytes/second.

Memory Swap Used

• The amount of memory used for swap space in KB. This is not available in the UI by default. It can be made available through dynamic configuration.
• The type is int.
• The unit is kilobytes.

Memory Swap_In_Rate From Host_Cache

• The rate (in KB per second) at which the memory is swapped from the host cache to the active memory. This is not available in the UI by default. It can be made available through dynamic configuration.
• The type is int.
• The unit is kilobytes/second.

Memory Swap_Out_Rate From Host_Cache

• The rate (in KB per second) at which the memory is swapped from the active memory to the host cache. This is not available in the UI by default. It can be made available through dynamic configuration.
• The type is int.
• The unit is kilobytes/second.

Memory Usage

• The amount of physical memory in use in MB. This is not available in the UI by default. It can be made available through dynamic configuration.
• The type is int.
• The unit is megabytes.

Memory Utilization

• The physical memory usage as a percentage of used physical memory divided by physical memory installed.
• The type is int.
• The unit is percent.

Dimensions

The following dimensions are available for the component.

Memory ESX Server Host Name

• The host name of the ESX server.
• The type is string.

Memory Granted Max Memory

• The maximum amount of memory (in KB) that can be used by the virtual machine. This is not available in the UI by default. It can be made available through dynamic configuration.
• The type is int.

Memory Granted Min Memory

• The minimum amount of memory (in KB) that can be used by the virtual machine. This is not available in the UI by default. It can be made available through dynamic configuration.
• The type is int.

Memory Include Data In Summarization 0

• This attribute is only for IBM-internal use.Indicates whether to include certain attribute data (numbers) in Tivoli Data Warehouse summarization.The valid values are 0 (exclude) and 1 (include). This is available for thresholds, but not in the UI.
• The type is int.

Memory Include Data In Summarization 1

• This attribute is only for IBM-internal use.Indicates whether to include certain attribute data (numbers) in Tivoli Data Warehouse summarization.The valid values are 0 (exclude) and 1 (include). This is available for thresholds, but not in the UI.
• The type is int.

Memory Include Data In Summarization 2

• This attribute is only for IBM-internal use.Indicates whether to include certain attribute data (numbers) in Tivoli Data Warehouse summarization.The valid values are 0 (exclude) and 1 (include). This is available for thresholds, but not in the UI.
• The type is int.

Memory Include Data In Summarization 3

• This attribute is only for IBM-internal use.Indicates whether to include certain attribute data (numbers) in Tivoli Data Warehouse summarization.The valid values are 0 (exclude) and 1 (include). This is available for thresholds, but not in the UI.
• The type is int.

Memory Include Data In Summarization 4

• This attribute is only for IBM-internal use.Indicates whether to include certain attribute data (numbers) in Tivoli Data Warehouse summarization.The valid values are 0 (exclude) and 1 (include). This is available for thresholds, but not in the UI.
• The type is int.

Memory Low_Free Threshold

• The threshold of the free host physical memory (in KB).The ESX server starts recovering the memory from the virtual machines by using ballooning and swapping when the threshold is reached. This is not available in the UI by default. It can be made available through dynamic configuration.
• The type is int.

Memory Node

• Memory Node.
• The type is string.

Memory Node Id

• This attribute is only for IBM-internal use. This is not available in the UI by default. It can be made available through dynamic configuration.
• The type is string.

Memory Physical Memory

• The amount of physical memory in MB on this server. This is not available in the UI by default. It can be made available through dynamic configuration.
• The type is int.

Memory Service Console

• The amount of memory reserved by the service console for the server in KB. This is not available in the UI by default. It can be made available through dynamic configuration.
• The type is int.

Time Stamp

• This is the local time when the data was collected. This is available for thresholds, but not in the UI.
• The type is timestamp.

Component: Virtual Machine Data Store Usage

Information about how each virtual machine is utilizing a data store. The following section lists the metrics and dimensions of Component Virtual Machine Data Store Usage.

Metrics

The following metrics are available for the component.

VM Datastore Usage Unused Space on Data Store

• The reserved but unused amount of space in GB, on this data store, that this virtual machine can use in the future. This is not available in the UI by default. It can be made available through dynamic configuration.
• The type is double.
• The unit is gigabytes.

VM Datastore Usage Virtual Machine Space

• The amount of space in GB, on this data store, that this virtual machine is using. This is not available in the UI by default. It can be made available through dynamic configuration.
• The type is double.
• The unit is gigabytes.

Dimensions

The following dimensions are available for the component.

Time Stamp

• This is the local time when the data was collected. This is available for thresholds, but not in the UI.
• The type is timestamp.

VM Datastore Reserved Space

• The total reserved amount of space in GB, on this data store, that this virtual machine can use. This is not available in the UI by default. It can be made available through dynamic configuration.
• The type is double.

VM Datastore Usage Data Store Name

• The name of the data store.
• The type is string.

VM Datastore Usage Datacenter Name

• The name of the data center that contains this data store.
• The type is string.

VM Datastore Usage Include Data In Summarization 0

• This attribute is only for IBM-internal use.Indicates whether to include certain attribute data (numbers) in Tivoli Data Warehouse summarization.The valid values are 0 (exclude) and 1 (include). This is available for thresholds, but not in the UI.
• The type is int.

VM Datastore Usage Node Id

• This attribute is only for IBM-internal use.
• The type is string.

VM Datastore Usage Node Id

• This attribute is only for IBM-internal use.
• The type is string.

VM Datastore Usage Percent Committed

• The percentage of space on this datastore that is committed as a percentage of the provisioned amount. This is not available in the UI by default. It can be made available through dynamic configuration.
• The type is double.

VM Datastore Usage Virtual Machine

• The name of the virtual machine on the data store.
• The type is string.

VM Datastore Usage VM DataStore Usage node

• node.
• The type is string.

VM Datastore VM Dedicated Space

• The amount of space in GB, on this data store, occupied by this virtual machine that is not shared with any other virtual machines. This is not available in the UI by default. It can be made available through dynamic configuration.
• The type is double.

Component: Virtual Switches

Information about the virtual switches in the virtual infrastructure. The following section lists the metrics and dimensions of Component Virtual Switches.

Metrics

The following metrics are available for the component.

Switch Received

• The amount of data received in the performance interval in KB per second. This is not available in the UI by default. It can be made available through dynamic configuration.
• The type is int.
• The unit is kilobytes/second.

Switch Total Virtual Switch Usage

• The total usage of the virtual switch. This is not available in the UI by default. It can be made available through dynamic configuration.
• The type is int.
• The unit is usage.

Switch Transmitted

• The amount of data transmitted in the performance interval in KB per second. This is not available in the UI by default. It can be made available through dynamic configuration.
• The type is int.
• The unit is kilobytes/second.

Dimensions

The following dimensions are available for the component.

Switch Datacenter Name

• The name of the data center that uses this virtual switch. This is not available in the UI by default. It can be made available through dynamic configuration.
• The type is string.

Switch Include Data In Summarization 0

• This attribute is only for IBM-internal use.Indicates whether to include certain attribute data (numbers) in Tivoli Data Warehouse summarization.The valid values are 0 (exclude) and 1 (include). This is available for thresholds, but not in the UI.
• The type is int.

Switch Name

• The name of the virtual switch. This is not available in the UI by default. It can be made available through dynamic configuration.
• The type is string.

Switch Network Name

• The name of the network with which the virtual switch is associated. This is not available in the UI by default. It can be made available through dynamic configuration.
• The type is string.

Switch node

• node. This is not available in the UI by default. It can be made available through dynamic configuration.
• The type is string.

Switch Number NICs

• The number of NICs connected to the virtual switch. This is not available in the UI by default. It can be made available through dynamic configuration.
• The type is int.

Switch Server Hostname

• The host name of the ESX server that the virtual switch belongs to. This is not available in the UI by default. It can be made available through dynamic configuration.
• The type is string.

Time Stamp

• This is the local time when the data was collected. This is available for thresholds, but not in the UI.
• The type is timestamp.

Resource vmNetworks

This resource type provide information for VMware Networks (Distributed Switches). The following section lists the metrics, dimensions and components of Resource vmNetworks.

Metrics

The following metrics are available for the resource.

Include Data In Summarization 0

• This attribute is only for IBM-internal use.Indicates whether to include certain attribute data (numbers) in Tivoli Data Warehouse summarization.The valid values are 0 (exclude) and 1 (include). This is available for thresholds, but not in the UI.
• The type is int.
• The unit is ?.

Link Speed

• The current operating speed of the NIC in MB per second (mbps).
• The type is int.
• The unit is megabytes/second.

Link Utilization

• The percent usage of the NIC relative to the capacity of the link (including duplex).
• The type is double.
• The unit is percent.

NIC Usage

• The sum of data transmitted and received in the performance interval in KB per second.
• The type is int.
• The unit is kilobytes/second.

Pkts Dropped

• The number of packets dropped in the performance interval.
• The type is int.
• The unit is packets.

Pkts Received

• The number of packets received in the performance interval.
• The type is int.
• The unit is packets.

Pkts Transmitted

• The number of packets transmitted in the performance interval.
• The type is int.
• The unit is packets.

Receive Pkts Dropped

• The number of receive packets dropped in the performance interval.
• The type is int.
• The unit is packets.

Received

• The amount of data received in the performance interval in KB per second.
• The type is int.
• The unit is kilobytes/second.

Transmit Pkts Dropped

• The number of transmit packets dropped in the performance interval.
• The type is int.
• The unit is packets.

Dimensions

The following dimensions are available for the resource.

Cluster Name

• The name of the cluster that this ESX server is a member of or unavailable if not a member of any cluster.
• The type is string.

Datacenter Name

• The name of the data center this ESX Server is a member of.
• The type is string.

Duplex

• The current operating mode of the NIC.
• The type is string.

Include Data In Summarization 1

• This attribute is only for IBM-internal use.Indicates whether to include certain attribute data (numbers) in Tivoli Data Warehouse summarization.The valid values are 0 (exclude) and 1 (include). This is available for thresholds, but not in the UI.
• The type is int.

Include Data In Summarization 2

• This attribute is only for IBM-internal use.Indicates whether to include certain attribute data (numbers) in Tivoli Data Warehouse summarization.The valid values are 0 (exclude) and 1 (include). This is available for thresholds, but not in the UI.
• The type is int.

NIC ESX Host Server Name

• The host name of the ESX server.
• The type is string.

NIC Name

• The name or label of this network interface.
• The type is string.

NIC Node

• NIC Node.
• The type is string.

Physical Address

• The physical address of this NIC.
• The type is string.

Time Stamp

• This is the local time when the data was collected. This is available for thresholds, but not in the UI.
• The type is timestamp.

Virtual Switch Name

• The name of the virtual switch that the NIC is configured with.
• The type is string.

Resource vmVirtualMachine

This is the resource information for Virtual Machines. The following section lists the metrics, dimensions and components of Resource vmVirtualMachine.

Metrics

The following metrics are available for the resource.

Virtual Machine CPU Utilization

• The overall CPU usage of this virtual machine during the collection interval. This metric is calculated by using the values of the actual used CPU and allocated CPU usage. Actual used CPU is based on the usage of the operating system and contribution of the ESX host. If the actual used CPU is greater than the allocated CPU usage, then the percentage CPU utilization exceeds 100%.
• The type is double.
• The unit is percent.

Virtual Machine Datastore Percent Utilization

• The overall datastore usage of this virtual machine during the collection interval.
• The type is int.
• The unit is percent.

Virtual Machine Memory Size(MB)

• The memory size of the virtual machine in MB.
• The type is int.
• The unit is Megabytes.

Virtual Machine Percent Ready

• The CPU percent ready metric across all the virtual machine CPUs.
• The type is int.
• The unit is percent.

Virtual Machine Snapshot Storage Consumed (MB)

• The amount of disk space (in MB) that is used by the virtual machine for the snapshots.
• The type is int.
• The unit is Megabytes.

Virtual Machine Used CPU MHz

• The total amount of CPU used by this virtual machine during the last sample period measured in MHz.
• The type is int.
• The unit is megahertz.

Dimensions

The following dimensions are available for the resource.

Include Data In Summarization 5

• This attribute is only for IBM-internal use.Indicates whether to include certain attribute data (numbers) in Tivoli Data Warehouse summarization.The valid values are 0 (exclude) and 1 (include). This is available for thresholds, but not in the UI.
• The type is int.

Virtual machine CPU Available to VM

• Minimum amount of CPU in mhz guaranteed to be available to the virtual machine. This is not available in the UI by default. It can be made available through dynamic configuration.
• The type is double.

Timestamp

• This is the local time when the data was collected. This is available for thresholds, but not in the UI.
• The type is timestamp.

Virtual Machine Cluster

• The name of the cluster that this virtual machine is a member of or unavailable if not a member of any cluster.
• The type is string.

Virtual Machine Connection State

• The connection status of the virtual machine.The valid values are connected, disconnected, inaccessible, invalid, and orphaned.
• The type is string.

Virtual Machine Consolidation Needed

• Indicates whether any disk of the virtual machine requires consolidation. This is not available in the UI by default. It can be made available through dynamic configuration.
• The type is string.

Virtual Machine CPU Limit

• The CPU limit of the virtual machine in mhz. This is not available in the UI by default. It can be made available through dynamic configuration.
• The type is double.

Virtual Machine CPU Shares

• The number of CPU shares, the relative weight, allocated to this virtual machine. This number is the actual value when the shares level has been configured as 'custom'. In general, the more shares a virtual machine has the more resource it gets. This is not available in the UI by default. It can be made available through dynamic configuration.
• The type is int.

Virtual Machine Datacenter

• The name of this data center.
• The type is string.

Virtual Machine ESX Server Host Name

• The host name of this virtual machine.
• The type is string.

Virtual Machine Fault Tolerance

• An indication of the protection of the virtual machine against hardware failures. This attribute can be configured with a secondary virtual machine or it can be running on a server that is a member of a cluster that is configured for High Availability. This is not available in the UI by default. It can be made available through dynamic configuration.
• The type is int.

Virtual Machine Guest OS MSN

• The managed system name of the guest OS agent within the virtual machine.
• The type is string.

Virtual Machine Guest OS Name

• The full name of the guest operating system for this virtual machine.
• The type is string.

Virtual Machine Guest State

• The operational state of the guest operating system installed in this virtual machine. The values can be running, shuttingdown, resetting, standby, notrunning, and unknown. This is not available in the UI by default. It can be made available through dynamic configuration.
• The type is string.

Virtual Machine Heartbeats Received

• The number of heartbeats received from the virtual machine. This is not available in the UI by default. It can be made available through dynamic configuration.
• The type is int.

Virtual Machine Host Server Name

• Host Server Name.
• The type is string.

Virtual Machine Include Data In Summarization 0

• This attribute is only for IBM-internal use.Indicates whether to include certain attribute data (numbers) in Tivoli Data Warehouse summarization.The valid values are 0 (exclude) and 1 (include). This is available for thresholds, but not in the UI.
• The type is int.

Virtual Machine Include Data In Summarization 1

• This attribute is only for IBM-internal use.Indicates whether to include certain attribute data (numbers) in Tivoli Data Warehouse summarization.The valid values are 0 (exclude) and 1 (include). This is available for thresholds, but not in the UI.
• The type is int.

Virtual Machine Include Data In Summarization 2

• This attribute is only for IBM-internal use.Indicates whether to include certain attribute data (numbers) in Tivoli Data Warehouse summarization.The valid values are 0 (exclude) and 1 (include). This is available for thresholds, but not in the UI.
• The type is int.

Virtual Machine Include Data In Summarization 3

• This attribute is only for IBM-internal use.Indicates whether to include certain attribute data (numbers) in Tivoli Data Warehouse summarization.The valid values are 0 (exclude) and 1 (include). This is available for thresholds, but not in the UI.
• The type is int.

Virtual Machine Include Data In Summarization 4

• This attribute is only for IBM-internal use.Indicates whether to include certain attribute data (numbers) in Tivoli Data Warehouse summarization.The valid values are 0 (exclude) and 1 (include). This is available for thresholds, but not in the UI.
• The type is int.

Virtual Machine Include Data In Summarization 6

• This attribute is only for IBM-internal use.Indicates whether to include certain attribute data (numbers) in Tivoli Data Warehouse summarization.The valid values are 0 (exclude) and 1 (include). This is available for thresholds, but not in the UI.
• The type is int.

Virtual Machine Instance UUID

• The instance UUID of the fault tolerance virtual machine.
• The type is string.

Virtual Machine Instance UUID

• The virtual center specific 128-bit Universal Unique ID (UUID) of a virtual machine.The UUID is represented as a hexadecimal string.This identifier is used by VirtualCenter to uniquely identify all the virtual machine instances. This is not available in the UI by default. It can be made available through dynamic configuration.
• The type is string.

Virtual Machine IP Address

• The IP address of this virtual machine. This is not available in the UI by default. It can be made available through dynamic configuration.
• The type is string.

Virtual Machine Memory Limit

• The memory limit of the virtual machine in MB. This is not available in the UI by default. It can be made available through dynamic configuration.
• The type is int.

Virtual Machine Memory Reservation

• VM Memory Reservation. This is not available in the UI by default. It can be made available through dynamic configuration.
• The type is int.

Virtual Machine Memory Shares

• The number of memory shares, the relative weight, allocated to this virtual machine. This number is the actual value when the shares level has been configured as 'custom'. In general, the more shares a virtual machine has the more resource it gets. This is not available in the UI by default. It can be made available through dynamic configuration.
• The type is int.

Virtual Machine MOREF

• The internal managed object reference name of the virtual machine. This is not available in the UI by default. It can be made available through dynamic configuration.
• The type is string.

Virtual Machine Name

• The user-defined display name of this virtual machine.
• The type is string.

Virtual Machine Node

• Node.
• The type is string.

Virtual Machine Node ID

• This attribute is only for IBM-internal use.
• The type is string.

Virtual Machine Num CPUs

• The number of CPUs configured for this virtual machine.
• The type is int.

Virtual Machine Number of Disks

• The number of disks that are connected to the virtual machine.
• The type is int.

Virtual Machine Number of NICs

• The number of NICs that are connected to the virtual machine.
• The type is int.

Virtual Machine Number Of Snapshots

• The number of snapshots stored for this virtual machine.
• The type is int.

Virtual Machine OS Type

• The guest family for the operating system. This is available for thresholds, but not in the UI.
• The type is int.

Virtual Machine Overall Status

• The overall alarm status of the virtual machine. A value of red or yellow indicates that an alarm has been triggered for the virtual machine.
• The type is string.

Virtual Machine Power Status

• The current power status of the virtual machine.
• The type is string.

Virtual Machine Resource Pool

• The name of the resource pool of which this virtual machine is a member. This is not available in the UI by default. It can be made available through dynamic configuration.
• The type is string.

Virtual Machine Storage DRS Enable

• Indicates whether the Storage DRS is enabled. This is not available in the UI by default. It can be made available through dynamic configuration.
• The type is int.

Virtual Machine Template

• Indicates whether this virtual machine is a template instead of a regular virtual machine. This is not available in the UI by default. It can be made available through dynamic configuration.
• The type is int.

Virtual Machine Tools Status

• The operational status of the VMware VM Tools package in the guest operating system. This is not available in the UI by default. It can be made available through dynamic configuration.
• The type is string.

Virtual Machine Up Time

• The number of seconds since the virtual machine was started. This is not available in the UI by default. It can be made available through dynamic configuration.
• The type is int.

Virtual Machine UUID

• The UUID (Universally Unique Identifier) for this virtual machine. This is available for thresholds, but not in the UI.
• The type is string.

Virtual Machine Version

• The version string for this virtual machine. This is not available in the UI by default. It can be made available through dynamic configuration.
• The type is string.

Component: Virtual Machine CPU

Virtual Machine CPU. The following section lists the metrics and dimensions of Component Virtual Machine CPU.

Metrics

The following metrics are available for the component.

VM CPU Percent Ready

• The CPU ready time percentage. This value is calculated as the amount of time the VM spent in the ready state divided by the size of the sample interval. This is not available in the UI by default. It can be made available through dynamic configuration.
• The type is int.
• The unit is percent.

VM CPU Utilization

• The CPU usage percentage. This value is calculated as user time divided by the sum of used, ready, and wait times. This is not available in the UI by default. It can be made available through dynamic configuration.
• The type is int.
• The unit is percent.

Dimensions

The following dimensions are available for the component.

VM CPU CPU Number

• The virtual CPU number. This is not available in the UI by default. It can be made available through dynamic configuration.
• The type is int.

VM CPU Host Name

• The host name of the virtual machine. This is not available in the UI by default. It can be made available through dynamic configuration.
• The type is string.

VM CPU Host Server Name

• The host name of the ESX server that runs this virtual machine. This is not available in the UI by default. It can be made available through dynamic configuration.
• The type is string.

VM CPU Include Data In Summarization 0

• This attribute is only for IBM-internal use.Indicates whether to include certain attribute data (numbers) in Tivoli Data Warehouse summarization.The valid values are 0 (exclude) and 1 (include). This is available for thresholds, but not in the UI.
• The type is int.

VM CPU Node

• Node. This is not available in the UI by default. It can be made available through dynamic configuration.
• The type is string.

VM CPU Node ID

• This attribute is only for IBM-internal use. This is not available in the UI by default. It can be made available through dynamic configuration.
• The type is string.

VM CPU Ready Time

• The amount of time the CPU spent in the ready state in milliseconds. This is not available in the UI by default. It can be made available through dynamic configuration.
• The type is int.

VM CPU System Time

• The amount of time the CPU spent in the system state in milliseconds. This is not available in the UI by default. It can be made available through dynamic configuration.
• The type is int.

VM CPU Timestamp

• This is the local time when the data was collected. This is available for thresholds, but not in the UI.
• The type is timestamp.

VM CPU Used Time

• The amount of time the CPU used in milliseconds. This is not available in the UI by default. It can be made available through dynamic configuration.
• The type is int.

VM CPU User Time

• The amount of time the CPU spent in the user (non_system) state in milliseconds. This is not available in the UI by default. It can be made available through dynamic configuration.
• The type is int.

VM CPU VM Name

• The user-defined display name of this virtual machine. This is not available in the UI by default. It can be made available through dynamic configuration.
• The type is string.

VM CPU VM Name and CPU ID

• A concatenation of the VM Name and the CPU ID. This is not available in the UI by default. It can be made available through dynamic configuration.
• The type is string.

VM CPU VM OS Type

• The family for the guest operating system. This is not available in the UI by default. It can be made available through dynamic configuration.
• The type is int.

VM CPU Wait Time

• The amount of time the CPU spent in the wait state in milliseconds. This is not available in the UI by default. It can be made available through dynamic configuration.
• The type is int.

Component: Virtual Machine Disk

Virtual Machine Disk. The following section lists the metrics and dimensions of Component Virtual Machine Disk.

Metrics

The following metrics are available for the component.

Dimensions

The following dimensions are available for the component.

VM Disk Backing Datastore

• The name of the data store that backs this disk. This is not available in the UI by default. It can be made available through dynamic configuration.
• The type is string.

VM Disk Capacity

• The capacity of the disk in MB. This is not available in the UI by default. It can be made available through dynamic configuration.
• The type is double.

VM Disk Connected

• Indicates whether the disk is currently connected to the virtual machine. This is not available in the UI by default. It can be made available through dynamic configuration.
• The type is string.

VM Disk Disk Description

• The disk label and description. This is not available in the UI by default. It can be made available through dynamic configuration.
• The type is string.

VM Disk Host Server Name

• The host name of the ESX server that runs this virtual machine. This is not available in the UI by default. It can be made available through dynamic configuration.
• The type is string.

VM Disk Host Server Name

• The host name of the virtual machine. This is not available in the UI by default. It can be made available through dynamic configuration.
• The type is string.

VM Disk Node

• Node. This is not available in the UI by default. It can be made available through dynamic configuration.
• The type is string.

VM Disk Node ID

• This attribute is only for IBM-internal use. This is not available in the UI by default. It can be made available through dynamic configuration.
• The type is string.

VM Disk OS Type

• The guest family for the operating system. This is not available in the UI by default. It can be made available through dynamic configuration.
• The type is int.

VM Disk Read or Write Access

• The disk access (read or write). This is not available in the UI by default. It can be made available through dynamic configuration.
• The type is string.

VM Disk Removal

• Indicates whether the disk is a removable disk. This is not available in the UI by default. It can be made available through dynamic configuration.
• The type is string.

VM Disk Shares

• The number of disk shares, or the relative weight, allocated to this virtual machine. This is the actual value when the shares level has been configured as 'custom'. In general, the more shares a virtual machine has the more resource it gets. This is not available in the UI by default. It can be made available through dynamic configuration.
• The type is int.

VM Disk Timestamp

• This is the local time when the data was collected. This is not available in the UI by default. It can be made available through dynamic configuration.
• The type is timestamp.

VM Disk VM Name

• The user-defined display name of this virtual machine. This is not available in the UI by default. It can be made available through dynamic configuration.
• The type is string.

Component: Virtual Machine Disk Performance

Virtual Machine Disk Performance. The following section lists the metrics and dimensions of Component Virtual Machine Disk Performance.

Metrics

The following metrics are available for the component.

VM Disk Performance Number Write

• The number of times the data was written to the disk.
• The type is int.
• The unit is writes.

VM Disk Performance Read

• The amount of data that is read (in KB per second) from the disk during the collection interval.
• The type is double.
• The unit is kilobytes/second.

VM Disk Performance Write

• The amount of data that is written (in KB per second) to the disk during the collection interval.
• The type is double.
• The unit is kilobytes/second.

Dimensions

The following dimensions are available for the component.

Virtual Machine Disk Performance Node

• Node.
• The type is string.

VM Disk Performance Backing Datastore

• The name of the datastore that backs this VM disk if there is one.
• The type is string.

VM Disk Performance Disk Name

• The name of the disk.
• The type is string.

VM Disk Performance Include Data In Summarization 0

• This attribute is only for IBM-internal use.Indicates whether to include certain attribute data (numbers) in Tivoli Data Warehouse summarization.The valid values are 0 (exclude) and 1 (include). This is available for thresholds, but not in the UI.
• The type is int.

VM Disk Performance MOREF

• The internal managed object reference name of the virtual machine. This is not available in the UI by default. It can be made available through dynamic configuration.
• The type is string.

VM Disk Performance Number Read

• The number of times the data was read from the disk.
• The type is int.

VM Disk Performance Timestamp

• This is the local time when the data was collected. This is available for thresholds, but not in the UI.
• The type is timestamp.

VM Disk Performance Virtual Machine Name

• The name of the virtual machine.
• The type is string.

VM Disk Performance Virtual Machine Node ID

• This attribute is only for IBM-internal use. Provides the interval node ID of the virtual machine.
• The type is string.

Component: Virtual Machine Memory

Virtual Machine Memory. The following section lists the metrics and dimensions of Component Virtual Machine Memory.

Metrics

The following metrics are available for the component.

VM Memory Active

• The amount of memory (in MB) that is actively used.
• The type is int.
• The unit is megabytes.

VM Memory Granted

• The amount of memory (in MB) that is mapped to the virtual machine. This is not available in the UI by default. It can be made available through dynamic configuration.
• The type is int.
• The unit is megabytes.

VM Memory Guest Free

• The amount of guest OS memory currently free in MB. This value is calculated as the difference between MemoryTotalSize and MemoryGuestUsage. This is not available in the UI by default. It can be made available through dynamic configuration.
• The type is double.
• The unit is megabytes.

VM Memory Guest Usage

• The amount of memory being used by the guest operating system in MB. The value can be between 0 and the configured memory size of the virtual machine.
• The type is double.
• The unit is megabytes.

VM Memory Guest Utilization

• The percentage of memory (average) that was used by the guest running in this virtual machine over the past sample interval. This value is calculated as the percentage of MemoryGuestUsage over MemoryTotalSize.
• The type is double.
• The unit is percent.

VM Memory Host Free

• The amount of virtual machine memory currently free in MB. This value is calculated as the difference between MemoryTotalSize and MemoryHostUsage. This is not available in the UI by default. It can be made available through dynamic configuration.
• The type is double.
• The unit is megabytes.

VM Memory Host Usage

• The amount of host (server) memory in MB that is currently being used by the virtual machine.
• The type is double.
• The unit is megabytes.

VM Memory Host Utilization

• The percentage of memory (average) that was used by the virtual machine over the past sample interval. This value is calculated as the percentage of MemoryHostUsage over MemoryTotalSize.
• The type is int.
• The unit is percent.

VM Memory Usage Percent

• The amount of memory (in percentage) that is used from the total configured or available memory. This is not available in the UI by default. It can be made available through dynamic configuration.
• The type is double.
• The unit is percent.

Dimensions

The following dimensions are available for the component.

VM Memory Balloon Usage

• The amount of memory in KB being used by the VMware balloon driver.
• The type is int.

VM Memory Datacenter

• The name of the data center that contains this virtual machine.
• The type is string.

VM Memory Host Server Name

• The host name of the ESX server that runs this virtual machine.
• The type is string.

VM Memory Host Server Name

• The host name of the virtual machine. This is not available in the UI by default. It can be made available through dynamic configuration.
• The type is int.

VM Memory Include Data In Summarization 0

• This attribute is only for IBM-internal use.Indicates whether to include certain attribute data (numbers) in Tivoli Data Warehouse summarization.The valid values are 0 (exclude) and 1 (include). This is available for thresholds, but not in the UI.
• The type is int.

VM Memory Include Data In Summarization 1

• This attribute is only for IBM-internal use.Indicates whether to include certain attribute data (numbers) in Tivoli Data Warehouse summarization.The valid values are 0 (exclude) and 1 (include). This is available for thresholds, but not in the UI.
• The type is int.

VM Memory Include Data In Summarization 2

• This attribute is only for IBM-internal use.Indicates whether to include certain attribute data (numbers) in Tivoli Data Warehouse summarization.The valid values are 0 (exclude) and 1 (include). This is available for thresholds, but not in the UI.
• The type is int.

VM Memory Max Allocation

• Maximum amount of memory in MB that can be used by the virtual machine. The value is -1 if there is no limit. This is not available in the UI by default. It can be made available through dynamic configuration.
• The type is double.

VM Memory Minimum Allocation

• Minimum amount of memory in MB guaranteed to be allocated to the virtual machine. This is not available in the UI by default. It can be made available through dynamic configuration.
• The type is double.

VM Memory Node

• Node.
• The type is string.

VM Memory Node ID

• This attribute is only for IBM-internal use.
• The type is string.

VM Memory OS Type

• The guest family for the operating system. This is not available in the UI by default. It can be made available through dynamic configuration.
• The type is int.

VM Memory Shared

• The amount of memory (in MB) that is shared with other virtual machines.
• The type is double.

VM Memory Swap In Rate

• The rate (in KB per second) at which the memory is swapped from the disk to the active memory, over the past sample interval.
• The type is double.

VM Memory Swap Out Rate

• The rate (in KB per second) at which memory is swapped from the active memory to the disk, over the past sample interval.
• The type is double.

VM Memory Swap To File

• The total amount of virtual machine memory that has been swapped out to the swap file in KB.
• The type is double.

VM Memory Timestamp

• This is the local time when the data was collected. This is available for thresholds, but not in the UI.
• The type is timestamp.

VM Memory Total Size

• Total amount of memory allocated to the virtual machine in MB.
• The type is double.

VM Memory VM Name

• The user-defined display name of this virtual machine.
• The type is string.

Component: Virtual Machine Network

Virtual Machine Network. The following section lists the metrics and dimensions of Component Virtual Machine Network.

Metrics

The following metrics are available for the component.

VM Network Packets Received

• The number of packets received in the sample interval.
• The type is double.
• The unit is percent.

VM Network Packets Transmitted

• The number of packets transmitted in the sample interval.
• The type is double.
• The unit is percent.

VM Network Received

• VM Network Received.
• The type is int.
• The unit is kilobytes/second.

VM Network Transmitted

• VM Network Transmitted.
• The type is int.
• The unit is kilobytes/second.

Dimensions

The following dimensions are available for the component.

VM Network Cluster Name

• The name of the cluster that this virtual machine is a member of or unavailable if not a member of any cluster. This is not available in the UI by default. It can be made available through dynamic configuration.
• The type is string.

VM Network Datacenter Name

• The name of the data center this virtual machine is a member of. This is not available in the UI by default. It can be made available through dynamic configuration.
• The type is string.

VM Network Host Server Name

• The host name of the virtual machine.
• The type is string.

VM Network Host Server Name

• The host name of the ESX server that runs this virtual machine.
• The type is string.

VM Network Include Data In Summarization 0

• This attribute is only for IBM-internal use.Indicates whether to include certain attribute data (numbers) in Tivoli Data Warehouse summarization.The valid values are 0 (exclude) and 1 (include). This is available for thresholds, but not in the UI.
• The type is int.

VM Network Network Name

• The network name that the virtual NIC is associated with.
• The type is string.

VM Network NIC Description

• The description of this NIC.
• The type is string.

VM Network Node

• Node.
• The type is string.

VM Network Node ID

• This attribute is only for IBM-internal use.
• The type is string.

VM Network OS Type

• VM Network OS Type. This is not available in the UI by default. It can be made available through dynamic configuration.
• The type is int.

VM Network Physical Address of NIC

• The physical address of this NIC.
• The type is string.

VM Network Timestamp

• This is the local time when the data was collected. This is available for thresholds, but not in the UI.
• The type is timestamp.

VM Network Virtual Machine Name

• The user-defined display name of this virtual machine.
• The type is string.

VM Network Virtual Switch Name

• The name of the virtual switch that interface uses.
• The type is string.

Component: Virtual Machine Partition

Virtual Machine Partition. The following section lists the metrics and dimensions of Component Virtual Machine Partition.

Metrics

The following metrics are available for the component.

VM Partition Capacity

• VM Partition Capacity.
• The type is int.
• The unit is unspecified.

VM Partition Free Space

• VM Partition Free Space.
• The type is int.
• The unit is unspecified.

VM Partition Percent Free

• VM Partition Percent Free. This is not available in the UI by default. It can be made available through dynamic configuration.
• The type is int.
• The unit is unspecified.

VM Partition Percent Used

• VM Partition Percent Used.
• The type is int.
• The unit is unspecified.

VM Partition Used Space

• VM Partition Used Space.
• The type is int.
• The unit is unspecified.

Dimensions

The following dimensions are available for the component.

VM Partition Description

• The description or label of this disk partition. This is not available in the UI by default. It can be made available through dynamic configuration.
• The type is string.

VM Partition Host Server Name

• The host name of the ESX server that runs this virtual machine. This is not available in the UI by default. It can be made available through dynamic configuration.
• The type is string.

VM Partition Host Server Name

• The host name of the virtual machine. This is not available in the UI by default. It can be made available through dynamic configuration.
• The type is string.

VM Partition Include Data In Summarization 0

• This attribute is only for IBM-internal use.Indicates whether to include certain attribute data (numbers) in Tivoli Data Warehouse summarization.The valid values are 0 (exclude) and 1 (include). This is available for thresholds, but not in the UI.
• The type is int.

VM Partition Node

• Node. This is not available in the UI by default. It can be made available through dynamic configuration.
• The type is string.

VM Partition Node ID

• This attribute is only for IBM-internal use. This is not available in the UI by default. It can be made available through dynamic configuration.
• The type is string.

VM Partition OS

• The guest family for the operating system. This is not available in the UI by default. It can be made available through dynamic configuration.
• The type is string.

VM Partition Timestamp

• This is the local time when the data was collected. This is available for thresholds, but not in the UI.
• The type is timestamp.

VM Partition Virtual Machine Name

• The user-defined display name of this virtual machine. This is not available in the UI by default. It can be made available through dynamic configuration.
• The type is string.

Component: Virtual Machine Snapshot

Virtual Machine Snapshot. The following section lists the metrics and dimensions of Component Virtual Machine Snapshot.

Metrics

The following metrics are available for the component.

VM Snapshot Disk Space used by Snapshot

• The amount of disk space (in MB) that is used by the snapshot. This is not available in the UI by default. It can be made available through dynamic configuration.
• The type is int.
• The unit is megabytes.

Dimensions

The following dimensions are available for the component.

Time Stamp

• This is the local time when the data was collected. This is available for thresholds, but not in the UI.
• The type is timestamp.

VM Snapshot Internal Managed Object Reference Name

• The internal managed object reference name of the snapshot. This is not available in the UI by default. It can be made available through dynamic configuration.
• The type is string.

VM Snapshot Node

• Node. This is not available in the UI by default. It can be made available through dynamic configuration.
• The type is string.

VM Snapshot Snapshot Description

• The description of the snapshot. This is not available in the UI by default. It can be made available through dynamic configuration.
• The type is string.

VM Snapshot Snapshot Name

• The name of the snapshot. This is not available in the UI by default. It can be made available through dynamic configuration.
• The type is string.

VM Snapshot Snapshot timestamp

• The date and time when the snapshot was created. This is available for thresholds, but not in the UI.
• The type is timestamp.

VM Snapshot State of Virtual Machine

• The state of the virtual machine when the snapshot was created. This is not available in the UI by default. It can be made available through dynamic configuration.
• The type is string.

VM Snapshot Virtual Machine Name

• The name of the virtual machine. This is not available in the UI by default. It can be made available through dynamic configuration.
• The type is string.

Component: VM Datastore Utilization

VM Datastore Utilization. The following section lists the metrics and dimensions of Component VM Datastore Utilization.

Metrics

The following metrics are available for the component.

VM Datastore Utilization Committed Datastore Utilization (GB)

• The amount of space in GB, on this data store, that this virtual machine is using. This is not available in the UI by default. It can be made available through dynamic configuration.
• The type is double.
• The unit is gigabytes.

VM Datastore Utilization Percent Committed

• The percentage of space on this datastore that is committed as a percentage of the provisioned amount. This is not available in the UI by default. It can be made available through dynamic configuration.
• The type is double.
• The unit is percent.

VM Datastore Utilization Provisioned Space

• The total reserved amount of space in GB, on this data store, that this virtual machine can use. This is not available in the UI by default. It can be made available through dynamic configuration.
• The type is double.
• The unit is gigabytes.

VM Datastore Utilization Uncommitted Space (GB)

• The reserved but unused amount of space in GB, on this data store, that this virtual machine can use in the future. This is not available in the UI by default. It can be made available through dynamic configuration.
• The type is double.
• The unit is gigabytes.

VM Datastore Utilization Unshared Space (GB)

• The amount of space in GB, on this data store, occupied by this virtual machine that is not shared with any other virtual machines. This is not available in the UI by default. It can be made available through dynamic configuration.
• The type is double.
• The unit is gigabytes.

Dimensions

The following dimensions are available for the component.

VM Datastore Utilization Datacenter Name

• The name of the data center that contains this data store.
• The type is string.

VM Datastore Utilization Datastore Name

• The name of the data store.
• The type is string.

VM Datastore Utilization Include Data In Summarization 0

• This attribute is only for IBM-internal use.Indicates whether to include certain attribute data (numbers) in Tivoli Data Warehouse summarization.The valid values are 0 (exclude) and 1 (include). This is available for thresholds, but not in the UI.
• The type is int.

VM Datastore Utilization Node

• Node.
• The type is string.

VM Datastore Utilization Node ID

• This attribute is only for IBM-internal use.
• The type is string.

VM Datastore Utilization Timestamp

• This is the local time when the data was collected. This is available for thresholds, but not in the UI.
• The type is timestamp.

VM Datastore Utilization Virtual Machine Name

• The name of the virtual machine on the data store.
• The type is string.

VM Datastore Utilization VM Node ID

• This attribute is only for IBM-internal use.
• The type is string.

Resource vmwareVCenter

The collection of vCenters connected by VMware Agent. The following section lists the metrics, dimensions and components of Resource vmwareVCenter.

Metrics

The following metrics are available for the resource.

vCebter Executing Collection Units

• The total number of collection units currently executing.
• The type is double.
• The unit is units.

vCenter Collection Units

• The total number of collection units.
• The type is double.
• The unit is units.

vCenter Current CU Queue Time

• The number of seconds that the currently queued collection units have been queued, divided by the number of currently queued collection units.
• The type is double.
• The unit is seconds.

vCenter Inventory Age

• The number of seconds elapsed since the last time the inventory was updated.
• The type is double.
• The unit is seconds.

vCenter Queued Collection Units

• The total number of collection units currently queued.
• The type is int.
• The unit is units.

Dimensions

The following dimensions are available for the resource.

timestamp

• This is the local time when the data was collected. This is available for thresholds, but not in the UI.
• The type is timestamp.

vCenter Agent Connection

• The current connection status of this agent to the configured data source.
• The type is string.

vCenter Average CU Execution Time

• The number of seconds that the previously executed collection units executed, divided by the number of previously executed collection units.
• The type is double.

vCenter Average CU Queue Time

• The number of seconds that the previously queued collection units were queued, divided by the number of previously queued collection units.
• The type is double.

vCenter Configured Address

• The host address of the data source as entered in the agent data source configuration.
• The type is string.

vCenter Current CU Execution Time

• The number of seconds that the currently executing collection units have been executing, divided by the number of currently executing collection units.
• The type is double.

vCenter FQDN

• The fully qualified domain name of the data source.
• The type is string.

vCenter IP Address

• The IP address of the data source.
• The type is string.

vCenter Node

• Node.
• The type is string.

vCenter Type

• The type of data source, which can be vCenter or ESX server.
• The type is string.

vCenter Web Services Port

• The port through which the agent communicates with the data source.
• The type is int.