Installing Watson Studio

A project administrator can install Watson Studio on IBM® Cloud Pak for Data.

What permissions do you need to complete this task?
The permissions that you need depend on which tasks you must complete:
  • To install the Watson Studio operators, you must have the appropriate permissions to create operators and you must be an administrator of the project where the Cloud Pak for Data operators are installed. This project is identified by the ${PROJECT_CPD_OPS} environment variable.
  • To install Watson Studio, you must be an administrator of the project where you will install Watson Studio. This project is identified by the ${PROJECT_CPD_INSTANCE} environment variable.
When do you need to complete this task?
If you didn't install Watson Studio when you installed the platform, you can complete this task to add Watson Studio to your environment.

If you want to install all of the Cloud Pak for Data components at the same time, follow the process in Installing the platform and services instead.

Important: All of the Cloud Pak for Data components in a deployment must be installed at the same release.

Information you need to complete this task

Review the following information before you install Watson Studio:

Environment variables
The commands in this task use environment variables so that you can run the commands exactly as written.
  • If you don't have the script that defines the environment variables, see Setting up installation environment variables.
  • To use the environment variables from the script, you must source the environment variables before you run the commands in this task, for example:
    source ./cpd_vars.sh
Security context constraint requirements
Watson Studio uses the restricted security context constraint (SCC).
Installation location
Watson Studio must be installed in the same project (namespace) as the Cloud Pak for Data control plane. This project is identified by the ${PROJECT_CPD_INSTANCE} environment variable.
Common core services
Watson Studio requires the Cloud Pak for Data common core services.

If the common core services are not installed in the project where you plan to install Watson Studio, the common core services are automatically installed when you install Watson Studio. This increases the amount of time the installation takes to complete.

Storage requirements
You must tell Watson Studio what storage to use. The following storage classes are recommended. However, if you don't use these storage classes on your cluster, ensure that you specify a storage class with an equivalent definition.
Storage Storage classes
OpenShift® Data Foundation
  • ocs-storagecluster-cephfs
  • ocs-storagecluster-ceph-rbd
IBM Spectrum® Fusion ibm-spectrum-scale-sc
IBM Spectrum Scale Container Native ibm-spectrum-scale-sc
Portworx
  • portworx-rwx-gp3-sc

    (Equivalent to portworx-shared-gp3 in older installations)

  • portworx-couchdb-sc
  • portworx-elastic-sc
  • portworx-gp3-sc
NFS managed-nfs-storage
Amazon Elastic Block Store gp2-csi or gp3-csi

Block storage is supported but not required. If you specify block storage, you must also specify file storage is also required.

Amazon Elastic File System efs-nfs-client
IBM Cloud Block Storage ibmc-block-gold

Block storage is supported but not required. If you specify block storage, you must also specify file storage is also required.

IBM Cloud File Storage ibmc-file-gold-gid or ibm-file-custom-gold-gid

Before you begin

This task assumes that the following prerequisites are met:

Prerequisite Where to find more information
The cluster meets the minimum requirements for installing Watson Studio. If this task is not complete, see System requirements.
The workstation from which you will run the installation is set up as a client workstation and includes the following command-line interfaces:
  • Cloud Pak for Data CLI: cpd-cli
  • OpenShift CLI: oc
If this task is not complete, see Setting up a client workstation.
The Cloud Pak for Data control plane is installed. If this task is not complete, see Installing the platform and services.
For environments that use a private container registry, such as air-gapped environments, the Watson Studio software images are mirrored to the private container registry. If this task is not complete, see Mirroring images to a private container registry.

Procedure

Complete the following tasks to install Watson Studio:

  1. Logging in to the cluster
  2. Installing the operator
  3. Installing the service
  4. Validating the installation

Logging in to the cluster

To run cpd-cli manage commands, you must log in to the cluster.

To log in to the cluster:

  1. Run the cpd-cli manage login-to-ocp command to log in to the cluster as a user with sufficient permissions to complete this task. For example:
    cpd-cli manage login-to-ocp \
    --username=${OCP_USERNAME} \
    --password=${OCP_PASSWORD} \
    --server=${OCP_URL}
    Tip: The login-to-ocp command takes the same input as the oc login command. Run oc login --help for details.

Installing the operator

The Watson Studio operator simplifies the process of managing the Watson Studio service on Red Hat® OpenShift Container Platform.

To install Watson Studio, you must install the Watson Studio operator and create the Operator Lifecycle Manager (OLM) objects, such as the catalog source and subscription, for the operator.

Who needs to complete this task?
You must be a cluster administrator (or a user with the appropriate permissions to install operators) to create the OLM objects.
When do you need to complete this task?
Complete this task if the Watson Studio operator and other OLM artifacts have not been created for the current release.

If you complete this task and the OLM artifacts already exist on the cluster, the cpd-cli detects that you already have the OLM objects for the components at the specified release, the cpd-cli does not attempt to create the OLM objects again.

To install the operator:

  1. Create the OLM objects for Watson Studio:
    cpd-cli manage apply-olm \
    --release=${VERSION} \
    --cpd_operator_ns=${PROJECT_CPD_OPS} \
    --components=ws
    • If the command succeeds, it returns [SUCCESS]... The apply-olm command ran successfully.
    • If the command fails, it returns [ERROR] and includes information about the cause of the failure.

What to do next: Install the Watson Studio service.

Installing the service

After the Watson Studio operator is installed, you can install Watson Studio.

Who needs to complete this task?
You must be an administrator of the project where you will install Watson Studio.
When do you need to complete this task?
Complete this task if you want to add Watson Studio to your environment.

To install the service:

  1. Create the custom resource for Watson Studio.

    The command that you run depends on the storage on your cluster:

    • Run the following command to create the custom resource.

      cpd-cli manage apply-cr \
      --components=ws \
      --release=${VERSION} \
      --cpd_instance_ns=${PROJECT_CPD_INSTANCE} \
      --block_storage_class=${STG_CLASS_BLOCK} \
      --file_storage_class=${STG_CLASS_FILE} \
      --license_acceptance=true
    • Run the following command to create the custom resource.

      Remember: When you use IBM Spectrum Fusion storage, both ${STG_CLASS_BLOCK} and ${STG_CLASS_FILE} point to the same storage class, typically ibm-spectrum-scale-sc.
      cpd-cli manage apply-cr \
      --components=ws \
      --release=${VERSION} \
      --cpd_instance_ns=${PROJECT_CPD_INSTANCE} \
      --block_storage_class=${STG_CLASS_BLOCK} \
      --file_storage_class=${STG_CLASS_FILE} \
      --license_acceptance=true
    • Run the following command to create the custom resource.

      Remember: When you use IBM Spectrum Scale Container Native storage, both ${STG_CLASS_BLOCK} and ${STG_CLASS_FILE} point to the same storage class, typically ibm-spectrum-scale-sc.
      cpd-cli manage apply-cr \
      --components=ws \
      --release=${VERSION} \
      --cpd_instance_ns=${PROJECT_CPD_INSTANCE} \
      --block_storage_class=${STG_CLASS_BLOCK} \
      --file_storage_class=${STG_CLASS_FILE} \
      --license_acceptance=true
    • cpd-cli manage apply-cr \
      --components=ws \
      --release=${VERSION} \
      --cpd_instance_ns=${PROJECT_CPD_INSTANCE} \
      --storage_vendor=portworx \
      --license_acceptance=true
    • Run the following command to create the custom resource.

      Remember: When you use NFS storage, both ${STG_CLASS_BLOCK} and ${STG_CLASS_FILE} point to the same storage class, typically managed-nfs-storage.
      cpd-cli manage apply-cr \
      --components=ws \
      --release=${VERSION} \
      --cpd_instance_ns=${PROJECT_CPD_INSTANCE} \
      --block_storage_class=${STG_CLASS_BLOCK} \
      --file_storage_class=${STG_CLASS_FILE} \
      --license_acceptance=true
    • Run the following command to create the custom resource.

      Remember: When you use EFS storage, both ${STG_CLASS_BLOCK} and ${STG_CLASS_FILE} point to the same RWX storage class.
      cpd-cli manage apply-cr \
      --components=ws \
      --release=${VERSION} \
      --cpd_instance_ns=${PROJECT_CPD_INSTANCE} \
      --block_storage_class=${STG_CLASS_BLOCK} \
      --file_storage_class=${STG_CLASS_FILE} \
      --license_acceptance=true
    • Run the following command to create the custom resource.

      cpd-cli manage apply-cr \
      --components=ws \
      --release=${VERSION} \
      --cpd_instance_ns=${PROJECT_CPD_INSTANCE} \
      --block_storage_class=${STG_CLASS_BLOCK} \
      --file_storage_class=${STG_CLASS_FILE} \
      --license_acceptance=true
    • Run the following command to create the custom resource.

      Remember: When you use IBM Cloud File Storage storage, both ${STG_CLASS_BLOCK} and ${STG_CLASS_FILE} point to the same storage class, typically ibmc-file-gold-gid or ibm-file-custom-gold-gid.
      cpd-cli manage apply-cr \
      --components=ws \
      --release=${VERSION} \
      --cpd_instance_ns=${PROJECT_CPD_INSTANCE} \
      --block_storage_class=${STG_CLASS_BLOCK} \
      --file_storage_class=${STG_CLASS_FILE} \
      --license_acceptance=true
    • Run the following command to create the custom resource.

      cpd-cli manage apply-cr \
      --components=ws \
      --release=${VERSION} \
      --cpd_instance_ns=${PROJECT_CPD_INSTANCE} \
      --block_storage_class=${STG_CLASS_BLOCK} \
      --file_storage_class=${STG_CLASS_FILE} \
      --license_acceptance=true

Validating the installation

Watson Studio is installed when the apply-cr command returns [SUCCESS]... The apply-cr command ran successfully.

However, you can optionally run the cpd-cli manage get-cr-status command if you want to confirm that the custom resource status is Completed:

cpd-cli manage get-cr-status \
--cpd_instance_ns=${PROJECT_CPD_INSTANCE} \
--components=ws

What to do next

  1. Complete the steps in Post-installation tasks for Watson Studio before using the service.
  2. The service is ready to use. For details, see the Analyzing data and building models.