Shutting down the system with Netezza Performance Server

Learn how to power off IBM® Cloud Pak for Data System with Netezza® Performance Server running on it.


  1. Log in to the control plane node and verify the state of the system:
    [root@e1n1 ~]# ap state -d
    System state is 'Ready'
    Application state is 'Ready'
    Platform management state is 'Active'
  2. Run ap node and make a note of nodes on system.
    ap node
  3. Shut down Netezza Performance Server by running the following commands:
    1. docker exec -it ipshost1 bash
    2. su - nz
    3. rm /nz/.gpfstoken
    4. nzstop
    5. exit to come out of nz.
    6. exit to come out of docker.
  4. Stop the system and services running the commands from e1n1:
    [root@e1n1 ~]# ap apps disable VDB --force
    [root@e1n1 ~]# ap apps

    Wait and verify that VDB gets to the DISABLED state:

    [root@e1n1 ~]# apstop
    System in 'Stopped' state
    [root@e1n1 ~]# apstop --service
    Successfully deactivated system
    Stopping Magneto service on all nodes
    Note: Ignore the message: Problem occurred: Some service stopping steps failed on nodes fbond.
  5. Shut down GPFS file system from first control node. From e1n1 run:
    [root@e1n1 ~]#systemctl stop nfs
    [root@e1n1 ~]#mmumount all -a
    [root@e1n1 ~]#mmshutdown -a
  6. Verify GPFS file systems are unmounted:
    [root@e1n1 ~]# mmlsmount all -L
    Example output:
    [root@e1n1 ~]# mmlsmount all -Lmmcommon: mmremote command cannot be executed. Either none of the
    nodes in the cluster are reachable, or GPFS is down on all of the
    nodes. mmlsmount: Command failed. Examine previous error messages to
    determine cause.
  7. Shut down docker on all the control nodes:
    [root@e1n1 ~]# for node in $(/opt/ibm/appliance/platform/xcat/scripts/xcat/ --control); do ssh $node "service docker stop";done
    [root@e1n1 ~]# for node in $(/opt/ibm/appliance/platform/xcat/scripts/xcat/ --control); do ssh $node "service docker stop";done
    Redirecting to /bin/systemctl stop docker.service
    Redirecting to /bin/systemctl stop docker.service
    Redirecting to /bin/systemctl stop docker.service
  8. Shut down nodes from e1n1, in the following order:
    1. Power off all SPU (NPS) nodes (enclosures 3 and 4 in the example)
    2. Shut down the ICPD nodes (enclosures 1 and 2 in the example)
    3. Power off the ICPD nodes
    [root@e1n1 ~]# for ip in e{3..4}n{1..4}bmc; do ipmitool -I lanplus -H $ip -U USERID -P PASSW0RD power off; done
    [root@e1n1 ~]# ssh e2n4 'shutdown -h'
    [root@e1n1 ~]# ssh e2n3 'shutdown -h'
    [root@e1n1 ~]# ssh e2n2 'shutdown -h'
    [root@e1n1 ~]# ssh e2n1 'shutdown -h'
    [root@e1n1 ~]# ssh e1n4 'shutdown -h'
    [root@e1n1 ~]# ssh e1n3 'shutdown -h'
    [root@e1n1 ~]# ssh e1n2 'shutdown -h'
    [root@e1n1 ~]# shutdown -h
  9. Verify that all nodes are powered off. Wait 5 - 10 minutes.

    Check that the power LEDs are blinking on all the nodes.

  10. Physically remove power from the D2 enclosures, the fabric switch, and management switch.

What to do next

The power on procedure is described in Powering on the system with Netezza Performance Server.