Command line interface

The Probe for Alcatel-Lucent OS-OS is supplied with a command line interface (CLI). This interface allows you to issue commands to the probe (for example, to request a full resynchronization with the OS-OS device).

To use the CLI, you must use the CommandPort property in the properties file to specify a port through which commands will be sent. When you want to perform commands, open a Telnet connection to this port.

The following table describes the commands that you can use with the CLI.

Table 1. CLI commands
Command	Description
ack	This command enables the probe to acknowledge the OS-OS alarms.
clear	This command clears the OS-OS alarms.
exit/quit	This command closes the connection.
help	This command displays online help about the CLI.
name	This command displays the name information from the probe.
os_buffer_size	This command displays the number of events that the probe has buffered for transfer to the ObjectServer.
resynch	This command allows you to perform a full resynchronization with the Alcatel-Lucent OS-OS server.
shutdown	This command shuts down the probe.
stream_capture [on\|off]	This command enables or disables the stream capture facility.
version	This command displays the version of the probe.