Enabling the CPU and memory utilization monitoring

If the CPU and memory utilization data collection is disabled, the CPU and memory utilization data of each power server is not displayed in the UI.

Procedure

Use one of the following methods to enable the CPU and memory utilization monitoring.

  • Enable the CPU and memory utilization monitoring by running the following HMC management command chlparutil. 
    chlparutil-r config -m <CECname> -s <the sample rate in seconds, always 60>
  • Enable the CPU and memory utilization monitoring on the HMC console server.
    1. Log on the HMC console server with classic mode.
    2. Click Servers node on the navigation tree.
    3. Select the server and go to Operations > Utilization Data > Change the Sample rate.
    4. Set a sampling rate.
      The sampling rate is disabled by default. You can set the rate with appropriate values, for example, 30 minutes.