You
can start the deployment environment using the wsadmin command.
Before you begin
Ensure the wsadmin client can connect to
the deployment manager for the deployment environment.
Required security role for this task: When security and role-based authorization are enabled,
you must use a user ID and password with administrator or operator
authority to perform this task.
About this task
To start
the deployment environment with the wsadmin command, perform the following steps.
Procedure
- Open a command window.
- At the command prompt, enter the wsadmin command
to enter the command environment. The wsadmin command
is located in either the <WPS>/profiles/<dmgr profile>/bin directory
or the <WPS>/bin directory.
- Enter the startDeploymentEnv command
to start the deployment environment.
- If administrative
security is on, enter your user ID and
password when prompted.
Example
This example
starts the deployment environment (
MyDepEnv) on the host (
myDmgr)
with administrative security enabled.
Note: If you are running the wsadmin client
from the deployment
manager bin folder, you do not need to include the -host and -port parameters
in the command.
wsadmin -connType SOAP -host myDmgr -port 8879 -user dmgradmin -password dmgrpass
> $AdminTask startDeploymentEnv {-topologyName myDepEnv}
The -connType parameter
specifies the type of
connection to be used; the default argument is SOAP.
If you are using a SOAP connection, including this parameter is
optional.
The -host parameter specifies the
host used for the SOAP or RMI connection. The default value for -host is
the local host. If the node is running on the local
host, you don not need to include this parameter.
If you disable
administrative security, you do not need to provide a user ID and
password.