chfs Command

The following attribute or value pairs are specific to the Journaled File System (JFS):

-a copy=Copy#

Specifies which mirror copy to split off when used in conjunction with the splitcopy attribute. The default copy is the second copy. Valid values are 1, 2, or 3.

-a log=LVName

Specifies the full path name of the file system logging logical volume name of the existing log to be used. The log device for this file system must reside on the same volume group as the file system.

-a size=NewSize

Specifies the size of the Journaled File System. The size can be specified in units of 512-byte blocks, megabytes or gigabytes. If Value has the M suffix, it is interpreted to be in megabytes. If Value has a G suffix, it is interpreted to be in gigabytes. If Value begins with a +, it is interpreted as a request to increase the file system size by the specified amount. If the specified size is not evenly divisible by the physical partition size, it is rounded up to the closest number that is evenly divisible.

The volume group in which the file system resides defines a maximum logical volume size and also limits the file system size.

The maximum size of a JFS file system is a function of its fragment size and the nbpi value. These values yield the following size restrictions:

  NBPI  Minimum AG Size    Fragment Size        Maximum Size (GB)
   512         8        512, 1024, 2048, 4096          8
  1024         8        512, 1024, 2048, 4096         16
  2048         8        512, 1024, 2048, 4096         32
  4096         8        512, 1024, 2048, 4096         64
  8192         8        512, 1024, 2048, 4096        128
 16384         8             1024, 2048, 4096        256
 32768        16                   2048, 4096        512
 65536        32                         4096       1024
131072        64                         4096       1024

-a splitcopy=NewMountPointName

Splits off a mirrored copy of the file system and mounts it read-only at the new mount point. This provides a copy of the file system with consistent JFS meta-data that can be used for backup purposes. User data integrity is not guaranteed, so it is recommended that file system activity be minimal while this action is taking place. Only one copy may be designated as an online split mirror copy.

-a ea=v2

Converts the JFS2 file system extended attribute (ea) format. A JFS2 file system using the v1 format can be converted to one using v2 format. After it is converted the file system cannot be converted back to v1. The conversion is done in an on-demand manner such that any extended attribute or ACL writes cause the conversion for that file object to occur. The v2 format provides support for scalable named extended attributes as well as support for NFS4 ACLs. The v1 format is compatible with prior releases of AIX®operating system.

-a efs=yes

Converts a file system to an Encrypted File System (EFS).

The chfs command changes an existing file system into an EFS file system. When the file system is EFS enabled, the ea attribute is automatically converted to store scalable extended attributes (v2). This command fails if you have not run the efsenable command on the system.

Restriction: The chfs commands prevents conversion of the following file systems (mount points) to EFS because the security infrastructures (kernel extensions, libraries and so on) are not available during boot:

• /
• /usr
• /var
• /opt

-a freeze = { timeout | 0 | off }

Specifies that the file system must be frozen or thawed, depending on the value of timeout. The act of freezing a file system produces a nearly consistent on-disk image of the file system, and writes all dirty file system metadata and user data to the disk. In its frozen state, the file system is read-only, and anything that attempts to modify the file system or its contents must wait for the freeze to end. The value of timeout must be either 0, off, or a positive number. If a positive number is specified, the file system is frozen for a maximum of timeout seconds. If timeout is 0 or off, the file system will be thawed, and modifications can proceed.

Attention: Freezing base file systems (/, /usr, /var, /tmp) can result in unexpected behavior.

-a lff=yes

Converts a file system to support large files and large file systems. By default, the maximum size of the JFS2 file system is 32 TB, and the maximum size of the file is 16 TB. If the value of the lff attribute is set to yes, the maximum potential size of the JFS2 file system is 4 PB, and the maximum potential file size is 4 PB. Additionally, if the lff attribute is set to yes, the file system can only be mounted on AIX 7.3, or later.

Notes:

1. You cannot change the value of the lff attribute after you set it to yes.
2. The lff attribute is only supported on a file system with an aggregate block size of 4096 bytes.

-a [ log | logname ]=LVName

Specifies the full path name of the file system logging logical volume name of the existing log to be used. The log device for this file system must reside on the same volume group as the file system. Keyword INLINE can be used to specify that the log is in the logical volume with the JFS2 file system. The file system must have been created with an INLINE log to use this option. This option updates the /etc/filesystems file so that if the name of the logical volume containing the file system changes the log will be recognized.

Note: For a file system using OUTLINE log, this option can be used to change the outline log from one logical volume to another logical volume as long as the logical volume is properly formatted and the type of the logical volume is jfs2log. If a file systems is mounted at the time chfs is called to change the outline log, the /etc/filesystems file will show the change, but the actual log will not be changed until the next mount for the file system (which follows a umount operation or a system crash and recovery). For a file system using INLINE log, this option does not support switching logs between INLINE and OUTLINE log. Currently, to switch from inlinelog to outlinelog (or vise versa), the file system has to be removed and recreated.

In release AIX 5L and AIX 5.1, if the file system is using inlinelog, the log entry is the same as the file system in /etc/filesystems file:

/j2.1:         
dev             = /dev/fslv00         
vfs             = jfs2         
log             = /dev/fslv00         
mount           = false         
account         = false

But, from AIX 5.2 and later releases, if the file system is using inlinelog, the log entry is the keyword INLINE in /etc/filesystems file:

/j2.23:         
dev             = /dev/fslv04         
vfs             = jfs2         
log             = INLINE         
mount           = false         
options         = rw         
account         = false

If the file system was created at AIX 5L or AIX 5.1, and later upgraded to AIX 5.2 or later releases, then chfs can be used to alter the inlinelog name in /etc/filesystems file.

-a logshuffle={INLINE | logdevicename}

Sets a file system to use the specified log. The specified log device must be in the same volume group as the current log device. If you specify logshuffle=INLINE, the logical volume will be extended to create an inline log device of the default size (0.4% of the file system, size up to 2047 MB) for the file system. Specifying an outline log device does not shrink the logical volume.

-a logsize=LogSize

Specifies the size for an INLINE log in MB. The input size must be a positive value. If the inline log size is greater than or equal to 1, the input size must be an integer. If the input is floating point value of less than 1 and greater than or equal to 0, the input size is ignored and the default inline log size is taken. If value begins with a + (plus sign), it is interpreted as a request to increase the INLINE log size by the specified amount. If value begins with a - (minus sign), it is interpreted as a request to reduce the INLINE log size by the specified amount.

The input is ignored if an INLINE log not being used. The INLINE log size cannot be greater than 10% of the size of the file system and it cannot be greater than 2047 MB.

-a managed={yes | no}

Enables Data Management Application Programming Interface (DMAPI) on a JFS2 file system.

-a maxext=Value

Specifies the maximum size of a file extent in file system blocks. A zero value implies that the JFS2 default maximum should be used. Values less than 0 or exceeding maximum supported extent size of 16777215 are invalid. Note that existing file extents are not affected by this change.

-a mountguard={yes | no}

Guards the file system against the unsupported concurrent mounts in a PowerHA® SystemMirror® or other clustering environment. If the mountguard is enabled, the file system cannot be mounted if it appears to be mounted on another node or system. To temporarily override the mountguard setting, see the noguard option of the mount command.

-a options = mountOptions

Specifies which mount option is passed into the chfs command. For a list of the valid options, refer to the mount command.

-a reclaim={normal | fast}

If the normal option is chosen, the reclaim command packs the file system as much as possible. The reclaim command looks for the biggest contiguous chunk of free space and then reclaims as much of it as it can. This makes the reclaimed free space available for reuse elsewhere in the system. However, when you use the normal option for the reclaim command, the file system becomes frozen. Therefore, if large amount of data is packed, the freeze time can be significant.

If the fast option is chosen, the reclaim command looks for the biggest contiguous chunk of free space and then reclaims as much of it as it can. This makes the reclaimed free space available for reuse elsewhere in the system.

It is not possible to determine exactly how much free space is recovered by the reclaim command. In order to get a rough estimate of the space reclaimed before running the chfs command, which will actually reclaim the space, you must first run, lvmstat –v <volume group> –e, and then after the chfs command finishes, run lvmstat –v <volume group> –r.

The first lvmstat command enables statistic collection for that volume group, and the second prints out the recorded statistics.

All of the disks in the file system must support the reclaim operation. The reclaim operation does not alter the actual file system size. The reclaim option cannot be specified if there are snapshots in the file system and cannot be run while live update is running, or if the file system is read-only. The reclaim option cannot be used along with any file system resize operation. Live update will not start if this command is in progress.

-a refreeze={timeout}

Specifies that the timeout for a frozen file system be reset. The timeout is reset to the value specified. The file system must still be frozen (using the -a freeze option or the fscntl interface).

-a size=NewSize

Specifies the size of the Enhanced Journaled File System in 512-byte blocks, megabytes, gigabytes, terabytes, or petabytes. If the value of the size attribute has the suffix M, the value is interpreted to be in megabytes. If the value of the size attribute has a suffix G, the value is interpreted to be in gigabytes. If the value of the size attribute has a suffix T, the value is interpreted to be in terabytes. If the value of the size attribute has a suffix P, the value is interpreted to be in petabytes. If the value of the size attribute begins with a +, it is interpreted as a request to increase the file system size by the specified amount. If the value of the size attribute begins with a -, it is interpreted as a request to reduce the file system size by the specified amount.

If the specified size does not begin with a + or -, but it is greater or smaller than the file system current size, it is also a request to increase or reduce the file system size.

If the file system has an inlinelog, the inlinelog size is recalculated based on the size of the new file system. If the specified size is not evenly divisible by the physical partition size, it is rounded up to the closest number that is evenly divisible. If the file system is on a striped logical volume, the size of the new file system is rounded to the nearest multiple of the striping width multiplied by the physical partition size. The striping width is the number of hard disks that form the striped logical volume.

The volume group in which the file system resides defines the maximum logical volume size and limits the file system size. The maximum size of the file system is determined by the file system block size:

fs block size (byte)        MAX fssize
===========================================
512                          4 TB
1024                         8 TB
2048                        16 TB
4096                        32 TB (lff=no) / 4 PB (lff=yes)

When a request to reduce the file system size is successful, the logical volume should be equal to or smaller than the original LV size depending on the requested file system size.

Both size and logsize attributes can be specified in one chfs request to resize the file system and its inlinelog sizes.

-a vix={yes|no}

Specifies whether the file system can allocate inode extents smaller than the default of 16 KB if there are no contiguous 16 KB extents free in the file system. After a file system is enabled for small free extents, it cannot be accessed on earlier versions of AIX and the marking cannot be removed.

yes

File system can allocate variable length inode extents.

no

File system must use default size of 16 KB for inode extents. This has no effect if the file system already contains variable length inode extents.

yes

File system is automatically mounted at system restart.

no

File system is not mounted at system restart.

ro

Specifies read-only permissions.

rw

Specifies read-write permissions.

yes

File system accounting is to be processed by the accounting subsystem.

no

File system accounting is not to be processed by the accounting subsystem; this is the default.