BNU PHASE 2 status messages
There are four BNU PHASE 2 status messages. The following table decribes them.
| Item | Description |
|---|---|
Dialer Script Failed |
Your Dialers file script did not complete successfully. |
No Device Available Can't Access Device |
The modem or the outgoing phone line from your system is
busy. Check for an error in the device entry of the Systems file.
Also, check the Devices and Dialers files
to be sure logical devices have physical devices associated with them.
The file /etc/uucp/Sysfiles might be specifying
an alternate Systems, Devices,
or Dialers file that is not correctly configured.
Is the device in use by some other program? Check the /var/locks directory
for lock on port. If a lock file exists (for example, LCK..TTY0),
check to see if the process identified by the number in the lock file
is still active. If not, you can remove it (for example, rm
/var/locks/LCK..TTY0 ). Also check the permissions on the
port. |
Dial Failed Failed (call to system) |
These errors appear when your system dials another successfully
but the other system does not answer. It might also indicate a problem
in the Devices files. Enter the command uucico
-r1 -x6 -s SystemName. It could
be that BNU is expecting some string that it is not receiving. Make
the connection by hand to find out what needs to be incorporated into
the Systems files entry to satisfy the request.
Please keep "timing" in mind; perhaps some delays in the modem dial
string are needed. This could also mean that the port is busy, you
dialed an incorrect number, or BNU lost ownership of the port. |
OK Auto Dial |
These are informative messages only and do not indicate an error. |