10/100 Mbps Ethernet PCI Adapter II Device Driver (1410ff01)
The Error IDs for the 10/100 Mbps Ethernet PCI Adapter II Device Driver (1410ff01) are as follows:
- ERRID_SCENT_ADAP_ERR
- Indicates that the adapter failed initialization commands. User intervention is necessary to fix the problem.
- ERRID_SCENT_PIO_ERR
- Indicates that the device driver has detected a program IO error. The device driver was unable to fix the problem. User intervention is necessary to fix the problem.
- ERRID_SCENT_EEPROM_ERR
- Indicates that an error occurred while reading the adapter EEPROM. User intervention is necessary to fix the problem.
- ERRID_SCENT_LINK_DOWN
- Indicates that the link between the adapter and the network switch is down. The device driver attempts to reestablish the connection after the physical link is reestablished. When the link is again established, the device driver logs ERRID_SCENT_RCVRY_EXIT. User intervention is necessary to fix the problem.
- ERRID_SCENT_RCVRY_EXIT
- Indicates that a temporary error (link down, command error, or transmission error) has been corrected.
- ERRID_SCENT_TX_ERR
- Indicates that the device driver has detected a transmission error. The device driver enters an adapter recovery mode in an attempt to recover from the error. If the device driver is successful, it logs ERRID_SCENT_RCVRY_EXIT. User intervention is not necessary for this error unless the problem persists.
- ERRID_SCENT_EEH_SERVICE_ERR
- Indicates that the device driver has detected a error during an attempt to recover from a PCI bus error. User intervention is necessary to fix the problem.