Testing the traceroute to a remote IP
Use the ipinterface_run_traceroute6 command to test connectivity to a remote IP node using the ICMP trace-route mechanism.
ipinterface_run_traceroute6 localipaddress6=IPv6address remote6=remoteHostParameters
| Name | Description | Mandatory |
|---|---|---|
|
localipadd
ress6 |
IPv6 address of the IP interface for which the traceroute6 command is run. | Y |
| remote6 | IPv6 address or DNS for the traceroute test. | Y |
This command runs a route trace to the specified remote host through the specified IP interface. The IP address must be one of the IP addresses defined for iSCSI IP interfaces, or the management or VPN name.
| ID | Name | Default Position |
|---|---|---|
|
traceroute_
output |
traceroute Output | 1 |
Access control
| User Category | Permission |
|---|---|
| Storage administrator | Allowed |
| Application administrator | Disallowed |
| Security administrator | Disallowed |
| Read-only users | Disallowed |
| Operations administrator | Allowed |
| Host side accelerator client | Disallowed |
Return codes
- NO_IP_INTERFACE_MATCHES_CRITERIA
No IP interface matches given criteria.
- MORE_THAN_ONE_IP_INTERFACE_MATCHES
More than one IP interface matches given criteria.