lsfabricport
Use the lsfabricport command to display the FDMI information that is discovered by the system.
Syntax
Parameters
- -callhome
- (Required) Displays all the FDMI fields for the port.
Description
To view the FDMI information, run the lsfabricport command. FDMI discovery runs automatically every 6 hours and collects information about the fabric.
This table shows the possible outputs:
| Attribute | Description |
|---|---|
| fc_WWPN | Indicates the port name. |
| fdmi_host_name | Indicates the host name that is registered by the port. |
| nportid | Indicates the port identifier on the switch. |
| fabric_name | Indicates the name of the port fabric. |
| speed | Indicates the current port speed in Gb. |
| supported_speed | Indicates the multiple supported speed by the port in Gb. |
| manufacturer | Indicates the manufacturer of the port or HBA. |
| serial_number | Indicates the serial number of HBA for the port. |
| model | Indicates the model of HBA for the port. |
| model_desc | Indicates the model description of HBA for the port. |
| firmware_version | Indicates the firmware version of HBA for the port. |
| driver_version | Indicates the driver version of HBA for the port. |
| os | Indicates the name and version of the operating software. |
| symbolic_name | Indicates the symbolic name of the node. |
| host_name | Indicates the name of the host object if WWPN is configured in a host object. |
| logged_in | Indicates whether the WWPN is logged in to any node in IBM® Storage Virtualize system. |
Note: If an attribute listed in Table 1 is not registered with the switch, its value is displayed as
blank.