| 9000 |
A tape alert flag was reported by a drive. |
| 9001 |
A drive is present but currently disabled. |
| 9002 |
The library was powered on. |
| 9003 |
Move Cartridge command was run. |
| 9004 |
Inventory scan was completed. |
| 9005 |
The library was powered down from Front Panel. |
| 9006 |
The network interface was turned on. |
| 9007 |
The network interface was turned off. |
| 9008 |
The System Time was synchronized with an NTP server. |
| 9009 |
A magazine was unlocked and opened. |
| 9010 |
A magazine was closed and locked. |
| 9011 |
An I/O station was unlocked and opened. |
| 9012 |
An I/O station was closed and locked. |
| 9013 |
A user logged in at the Management GUI. |
| 9014 |
A user logged out at the Management GUI. |
| 9015 |
A user logged in at the Operator Panel interface. |
| 9016 |
A user logged out at the Operator Panel interface. |
| 9024 |
Drive support ticket created. |
| 9025 |
Library test started. |
| 9026 |
Library test successfully finished. |
| 9027 |
Library test was stopped by user. |
| 9028 |
Configuration back up to chassis was successful. |
| 9029 |
Configuration restore from chassis was successful. |
| 9031 |
Library health Status was changed to status "OK”. |
| 9032 |
Library health status was changed to status "Warning". |
| 9033 |
Library health status was changed to status “Critical”. |
| 9035 |
New library chassis detected. |
| 9038 |
The library was rebooted through user interface. |
| 9041 |
Key on KMIP server created. |
| 9043 |
Drive cleaning was started. |
| 9045 |
Library configuration data failed to duplicate on to the Base Module. |
| 9060 |
One or multiple configured DNS servers aren’t responding. |
| 9061 |
User account was locked due to too many invalid login attempts on Management GUI. |
| 9062 |
Invalid password used for login. |
| 9063 |
The network port used to contact the encryption server was changed. |
| 9064 |
Backup of certificate created. |
| 9065 |
Certificate is restored. |
| 9066 |
Temporary password generated. |
| 9067 |
LTO7 formatted cartridge with a Type M bar code detected. |
| 9068 |
Type M cartridge without a Type M bar code detected. |
| 9069 |
Sequential Mode load sequence ended because last storage cartridge of logical
library was unloaded. |
| 9070 |
Sequential Mode load sequence restarted (Loop Mode) because last storage cartridge
of logical library was unloaded. |
| 9077 |
User submitted feedback |
| 9078 |
Unexpected drive reset occurred |
| 9079 |
Media optimization needed |