| 1 |
Right cartridge magazine |
If the module is on the bottom, the right cartridge magazine holds 16
cartridges; if anywhere else in the library, it can hold 20 cartridges. |
| 2 |
Left cartridge magazine |
If the module is on the bottom, the left cartridge magazine holds 16
cartridges; if anywhere else in the library, it can hold 20 cartridges. |
| 3 |
Accessor |
This component contains the library accessor and bar code reader. The
accessor moves cartridges to and from the
- I/O station
- Storage slots
- Tape drive
|
| 4 |
Controller Card |
This component is a customer replaceable unit (CRU) and stores the user
configuration information or vital product data (VPD). |
| 5 |
Tape drive |
The module can contain a half-height or a full-height tape drive. The
drive is a customer replaceable unit (CRU), and is designed for easy removal and replacement.
|
| 6 |
Power supply |
The power supply is a customer replaceable unit (CRU) and the sole source
of power for the module. The module is shipped with one power supply, but can contain an
optional second power supply for redundancy. |
| 7 |
Robotic lock lever |
This component is used to lock down the accessor so it cannot move. This
action is done when the module is moved or when the robotic assembly is removed. |
| 8 |
Finger hole |
One of two finger holes that are used to lift out the accessor assembly.
The other is under the accessor in the photograph. |
| 9 |
Spooling mechanism |
This component moves the accessor. |
