INGPLEX SLIP

Purpose

With the INGPLEX SLIP command you can display serviceability level indication processing (SLIP) traps being set at all systems in the sysplex. With INGPLEX SLIP you can view, enable, disable, and delete the SLIP trap defined in the sysplex.

Example

Figure 1. INGPLEX SLIP Main Panel

 INGLX270                  SA z/OS  - Command Dialogs       Line   1   of 144
 Domain Id . : IPSFP   ---------- INGPLEX SLIP ----------   Date . . : 01/26/18
 Operator Id : NETOP1          Sysplex = KEY1PLEX           Time . . : 10:42:57

 System  . . . . . ==> ________ (leave blank for all systems)
 Slip Trap Id  . . ==> ____     (leave blank for all ids)
 SAplex  . . . . . ==> KEY4PLEX          Permission . . . . : ALL
 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
 Cmds: +/- display/hide settings D disable E enable R remove

    System    Id    Status    Settings
    --------  ----  --------  --------------------------------------------------
 __ KEY1      SS71  ENABLED
 __ KEY1      S071  ENABLED
 __ KEY1      S3C4  ENABLED
 __ KEY1      XB37  ENABLED
 __ KEY1      XC1A  ENABLED
 __ KEY1      XD1A  ENABLED
 __ KEY1      XD37  ENABLED
 __ KEY1      XEC6  ENABLED

 Command ===>
 F1=Help      F2=End       F3=Return                              F6=Roll
              F8=Forward   F9=Refresh                            F12=Retrieve

The following command codes are available:

+: Shows the settings of the SLIP trap.
-: Hides the settings of the SLIP trap.
D: Disables the SLIP trap.
E: Enables the SLIP trap.
R: Deletes the SLIP trap.

The SORT, FIND and RFIND commands are supported.

Note: The user must be authorized to enable, disable, and delete a SLIP trap. The authorization can be any of those that are used for controlling coupling facilities and couple data sets.

For information about the panel fields refer to the online help.