BTADS0100W Invalid relationships between switches and fabrics were identified. If possible, these relationships will be fixed automatically for the following switches: value.
Explanation
Some switches were identified as belonging to more than one fabric. This issue might occur if two fabric data sources report different principal switches for the same fabric. The firmware on the switches might be the root cause of this problem. One of the principal switches is chosen to be displayed as the fabric WWN and the other switch WWN is not shown as a separate fabric.
Action
Ensure that all switches in your fabric are running the same firmware level. If the problem continues, upgrade the switches to the latest firmware level. If the problem still occurs, contact IBM customer support.