The Data Set List panel action bar choices function as follows:
- Menu
- For more information, see the details about the Menu Action Bar
Choice in the ISPF User Interface topic in the z/OS ISPF User's Guide Vol I.
- Options
- The Options pull-down offers these choices:
- DSLIST Settings
- The settings to control the behavior of the data set list display.
Options are:
- Display Edit/View entry panel
Note: If this field is selected
and a workstation Edit request is initiated when no valid workstation
connection exists, ISPF indicates on the Edit/View entry panel that
no connection exists and treats the request as a host Edit request.
- Update ON (Reference lists)
- List pattern for MO,CO,RS,D actions
- Show status for MO,CO,RS,D actions
- Confirm Member delete
- Confirm Data Set delete
- Do not show expanded command
- E,V,B enhanced member list
Selecting this choice causes the
enhanced member list to be used when the E,V, or B commands are used.
De-selecting this choice causes traditional member list processing
to occur.
- Display Total Tracks
- Execute Block Commands for excluded Data Sets
- Display Expiration Date
- Refresh List
- Refresh the display of the data set list.
- Append to List
- Select a Personal data set list to append to the existing DSLIST.
The DSLIST is rebuilt, including the data sets or data set name levels
from the personal list selected.
Note: The APPEND is based on the
selected personal data set list. If an entry in the list is not quoted,
your TSO prefix is added as the first level of the data set name.
If the entry contains a member, the member is ignored. Duplicate personal
list entries are ignored. If the entry contains a volume and "Include
volume on retrieve" is selected on the Referral List Settings panel,
a VTOC search is used instead of the catalog. A catalog search is
recommended for best performance. A volume should be used only if
the data set is not cataloged.
Enter the DSLIST primary
command REFRESH on the DSLIST display panel to erase all appended
personal lists.
- Save List
- Saves the data set list to a file.
- Reset
- Resets the data set list.
- View
- The View pull-down offers these choices:
Note: The current setting
is shown as an unavailable choice; that is, it is displayed in blue
(the default) with an asterisk as the first digit of the selection
number (if you are running in GUI mode, the choice will be grayed).
- 1
- Volume Changes the display to the Volume view, as shown
in Figure 1.
- 2
- Space Changes the display to the Space view.
Figure 1. Data set list - space view (ISRUDSL0) Menu Options View Utilities Compilers Help
───────────────────────────────────────────────────────────────────────────────
DSLIST - Data Sets Matching HANKO3 Row 1 of 14
Total Tracks: 86 non-x: 86 Data Sets: 14 non-x: 14
-------------------------------------------------------------------------------
Command - Enter "/" to select action Tracks %Used XT
-------------------------------------------------------------------------------
HANKO3
HANKO3.DDIR
HANKO3.DDIR.D 45 ? 1
HANKO3.DDIR.I 1 ? 1
HANKO3.EXEC 15 12 1
HANKO3.ISD1.ISPF.ISPPROF 1 100 1
HANKO3.ISD1.ISPVCALL.TRACE 2 100 1
HANKO3.ISPF.ISPPROF 1 100 1
HANKO3.ISPVCALL.TRACE 2 100 1
HANKO3.LOAD 15 13 1
HANKO3.MAKEDSNS.OUTPUT 1 100 1
HANKO3.SYS2.BRODCAST 1 0 1
HANKO3.TASID.SNAPSHOT 1 100 1
Command ===> Scroll ===> PAGE
F1=Help F2=Split F3=Exit F5=Rfind F7=Up F8=Down F9=Swap
F10=Left F11=Right F12=Cancel
- 3
- Attributes Changes the display to the Attributes view.
Figure 2. Data set list - attributes
view (ISRUDSL0) Menu Options View Utilities Compilers Help
───────────────────────────────────────────────────────────────────────────────
DSLIST - Data Sets Matching HANKO3 Row 1 of 14
Command - Enter "/" to select action Dsorg Recfm Lrecl Blksz
-------------------------------------------------------------------------------
HANKO3
HANKO3.DDIR VS
HANKO3.DDIR.D VS ? ? ?
HANKO3.DDIR.I VS ? ? ?
HANKO3.EXEC PO-E FB 80 32720
HANKO3.ISD1.ISPF.ISPPROF PO FB 80 27920
HANKO3.ISD1.ISPVCALL.TRACE PS FB 80 27920
HANKO3.ISPF.ISPPROF PO FB 80 6160
HANKO3.ISPVCALL.TRACE PS FB 80 27920
HANKO3.LOAD PO U 0 32760
HANKO3.MAKEDSNS.OUTPUT PS FB 80 27920
HANKO3.SYS2.BRODCAST PS FB 150 1500
HANKO3.TASID.SNAPSHOT PS VBA 255 27998
HANKO3.TEST PS VBA 138 13800
***************************** End of Data Set list ****************************
Command ===> Scroll ===> PAGE
F1=Help F2=Split F3=Exit F5=Rfind F7=Up F8=Down F9=Swap
F10=Left F11=Right F12=Cancel
- 4
- Total Changes the display to the Total view.
Figure 3. Data set list - total view (ISRUDSL0) Menu Options View Utilities Compilers Help
───────────────────────────────────────────────────────────────────────────────
DSLIST - Data Sets Matching HANKO3 Row 1 of 14
Total Tracks: 86 non-x: 86 Data Sets: 14 non-x: 14
-------------------------------------------------------------------------------
Command - Enter "/" to select action Message Volume
Tracks % XT Device Dsorg Recfm Lrecl Blksz Created Referred
-------------------------------------------------------------------------------
HANKO3 *ALIAS
-------------------------------------------------------------------------------
HANKO3.DDIR *VSAM*
VS
-------------------------------------------------------------------------------
HANKO3.DDIR.D D$US50
45 ? 1 3390 VS ? ? ? 2007/02/21 2007/02/21
-------------------------------------------------------------------------------
HANKO3.DDIR.I D$US50
1 ? 1 3390 VS ? ? ? 2007/02/21 ***None***
-------------------------------------------------------------------------------
Command ===> Scroll ===> PAGE
F1=Help F2=Split F3=Exit F5=Rfind F7=Up F8=Down F9=Swap
F10=Left F11=Right F12=Cancel
Figure 4. Data set list -
total view with catalog name (ISRUDSL0) Menu Options View Utilities Compilers Help
───────────────────────────────────────────────────────────────────────────────
DSLIST - Data Sets Matching HANKO3 Row 1 of 14
Total Tracks: 86 non-x: 86 Data Sets: 14 non-x: 14
-------------------------------------------------------------------------------
Command - Enter "/" to select action Message Volume
Tracks % XT Device Dsorg Recfm Lrecl Blksz Created Referred
Catalog
-------------------------------------------------------------------------------
HANKO3 *ALIAS
CATALOG.MASTER.SYSPLEXD
-------------------------------------------------------------------------------
HANKO3.DDIR *VSAM*
VS
CATALOG.USER1.SYSPLEXD
-------------------------------------------------------------------------------
HANKO3.DDIR.D D$US50
45 ? 1 3390 VS ? ? ? 2007/02/21 2007/02/21
CATALOG.USER1.SYSPLEXD
Command ===> Scroll ===> PAGE
F1=Help F2=Split F3=Exit F5=Rfind F7=Up F8=Down F9=Swap
F10=Left F11=Right F12=Cancel
- 5
- Sort You can sort the data set list by any of these fields:
- Name
- Message
- Volume
- Tracks
- Percent Used
- Extents
- Dsorg
- Recfm
- Lrecl
- Blksz
- Creation date
- Expiration date
- Referenced date
- Device
- Volume indicator
- Catalog
You can also specify the sort sequence
(ascending or descending) or accept the default sequence for the associated
sort field. By default, character fields are sorted alphabetically
and numeric fields are sorted in descending order.
- Utilities
- For more information, see the details about the Utilities Action
Bar Choice in the ISPF User Interface topic in the z/OS ISPF User's Guide Vol I.
- Compilers
- The Compilers pull-down offers you these choices:
- 1
- Foreground Compilers. Displays the Foreground Selection
Panel.
- 2
- Background Compilers. Displays the Batch Selection Panel.
- 3
- ISPPREP Panel Utility Displays the Preprocessed Panel
Utility panel.
- 4
- DTL Compiler Displays the ISPF Dialog Tag Language Conversion
Utility panel.
- Help
- The Help pull-down provides general information about the data
set list, including the format of the displayed list and the available
line commands and primary commands.