resetleds
Use the resetleds command to simultaneously switch off all identify light-emitting diodes (LEDs) in the system.
Syntax
Parameters
None.Description
The resetleds command switches off the identify indicators of all parts of the system. Use this command prior to turning on an identify indicator to ensure you are identifying only one part of the system.
Only identify indicators are turned off. Other indicators of system state, such as power or
signal LEDs, are not affected. Depending on the hardware model, this might mean:
- blue identify LEDs turn off.
- drive fault LEDs stop flashing and return to indicating whether a fault is present.
Note: The part containing the indicator must be a supported part, and be online and connected
to the system, otherwise the indicator might not reset.
An invocation example
resetledsThe resulting output:
No feedback