BFGUB0001 - BFGUB9999
- BFGUB0001E
- The configuration for IBM MQ Managed File Transfer can not be determined. The following exception was reported when enquiring of IBM MQ Managed File Transfer, <insert_0>
- Severity
- 20 : Error
- Explanation
- The configuration for the IBM MQ Managed File Transfer agents could not be found at the location given. This has prevented the command from completing.
- Response
- Check that any previous command that might have changed the configuration has completed correctly.
- BFGUB0005E
- Internal error: The required property file "<insert_0>" is missing. The command cannot successfully complete.
- Severity
- 20 : Error
- Explanation
- This exception is unexpected. The cause is not immediately known.
- Response
- If the problem persists, see problem determination information in the product documentation.
- BFGUB0006E
- The attempt to property read file "<insert_0>" failed with exception "<insert_1>"
- Severity
- 20 : Error
- Explanation
- While loading the IBM MQ Managed File Transfer configuration, an attempt to read the named file has failed. The command cannot complete.
- Response
- Check that the named file exists and that IBM MQ Managed File Transfer has permission to read the file.
- BFGUB0007E
- Internal error: The required the dataDirectory property could not be located when configuring MQMFT Version 7.0.4.1 and earlier. The "com.ibm.wmqfte.product.root" system property may be missing or the wmqfte.properties file it is referencing is missing.
- Severity
- 20 : Error
- Explanation
- This exception is unexpected. The cause is not immediately known.
- Response
- If the problem persists, see problem determination information in the product documentation.
- BFGUB0008E
- Internal error: The property type "<insert_0>" is not supported for method "<insert_1>".
- Severity
- 20 : Error
- Explanation
- This exception is unexpected. The cause is not immediately known.
- Response
- If the problem persists, see problem determination information in the product documentation.
- BFGUB0009E
- The following required property file is missing: "<insert_0>"
- Severity
- 20 : Error
- Explanation
- The named property file is required but is missing. This file contains the necessary configuration for the command to complete.
- Response
- Check that the named file exists and that IBM MQ Managed File Transfer has permission to read the file.
- BFGUB0010E
- Internal error: The configuration has not been initialized before first use.
- Severity
- 20 : Error
- Explanation
- This exception is unexpected. The cause is not immediately known.
- Response
- If the problem persists, see problem determination information in the product documentation.
- BFGUB0012E
- Property "<insert_0>" was expected to be in numeric format, but the property is not present in the configuration and does not have a default value.
- Severity
- 20 : Error
- Explanation
- The named numeric property is missing from the property file but the property is required for the current configuration. The command cannot successfully complete.
- Response
- Review the properties in the associated property file and add the missing property to the file. Alternatively, remove redundant properties from the file which might inadvertently have required this missing property.
- BFGUB0013E
- Internal error: Attempt to execute method "<insert_0>" when not executing in unit test mode.
- Severity
- 20 : Error
- Explanation
- This exception is unexpected. The cause is not immediately known.
- Response
- If the problem persists, see problem determination information in the product documentation.
- BFGUB0014E
- Internal error: Attempting to modify property "<insert_0>" of a non-cloned configuration property.
- Severity
- 20 : Error
- Explanation
- This exception is unexpected. The cause is not immediately known.
- Response
- If the problem persists, see problem determination information in the product documentation.
- BFGUB0015E
- The property file "<insert_0>" is missing.
- Severity
- 20 : Error
- Explanation
- The named property is missing and the command might not complete successfully.
- Response
- Check that the named file exists and that IBM MQ Managed File Transfer has permission to read the file.
- BFGUB0016E
- The property file "<insert_0>" had the following exception during reading "<insert_1>"
- Severity
- 20 : Error
- Explanation
- IBM MQ Managed File Transfer attempted to read the name property file but failed with the given exception.
- Response
- Check that the name given is present and IBM MQ Managed File Transfer has permission to read the file.
- BFGUB0017E
- Internal error: Duplicate attempt to initialise the configuration properties.
- Severity
- 20 : Error
- Explanation
- This exception is unexpected. The cause is not immediately known.
- Response
- If the problem persists, see problem determination information in the product documentation.
- BFGUB0018E
- Internal error: Attempt to execute method "<insert_0>" when not executing in unit test mode.
- Severity
- 20 : Error
- Explanation
- This exception is unexpected. The cause is not immediately known.
- Response
- If the problem persists, see problem determination information in the product documentation.
- BFGUB0019E
- The property file "<insert_0>" is missing.
- Severity
- 20 : Error
- Explanation
- The required property file is not present in the configuration.
- Response
- Check that any previous command that might have changed the configuration has completed correctly.
- BFGUB0020E
- The property file "<insert_0>" had the following exception while reading "<insert_1>"
- Severity
- 20 : Error
- Explanation
- IBM MQ Managed File Transfer attempted to read the named property file but failed with the given exception.
- Response
- Check that the named file exists and that IBM MQ Managed File Transfer has permission to read the file.
- BFGUB0021E
- The required property name "<insert_0>" is not present in the property set.
- Severity
- 20 : Error
- Explanation
- The given property name is required for the command to complete successfully, but the propery cannot be located in any of the associated property files.
- Response
- Check that any previous command that might have changed the configuration has completed correctly.
- BFGUB0022E
- The property name "<insert_0>" has an invalid numeric value of "<insert_1>"
- Severity
- 20 : Error
- Explanation
- The named property must be a numeric value for the command to successfully complete.
- Response
- Review the associated property file and change the property so that is has a valid numeric value.
- BFGUB0023E
- The property name "<insert_0>" has a value of "<insert_1>", which is not in the range between "<insert_2>" and "<insert_3>"
- Severity
- 20 : Error
- Explanation
- The named numeric property is present in the configuration, but has a value that is outside the valid range.
- Response
- Review the associated property file and change the value to one that is in the given ranges.
- BFGUB0024E
- The property name "<insert_0>" has an invalid boolean value of "<insert_1>"
- Severity
- 20 : Error
- Explanation
- The named property has only two options and the one assigned is not a valid option.
- Response
- Review the associated property file and change the property to have a value of true or false, yes or no, or on or off.
- BFGUB0025E
- Internal error: Cloning as non matching original of "<insert_0>" when "<insert_1>" was expected.
- Severity
- 20 : Error
- Explanation
- This exception is unexpected. The cause is not immediately known.
- Response
- If the problem persists, see problem determination information in the product documentation.
- BFGUB0026E
- Internal error: Cloning as non matching original of "<insert_0>" when "<insert_1>" was expected.
- Severity
- 20 : Error
- Explanation
- This exception is unexpected. The cause is not immediately known.
- Response
- If the problem persists, see problem determination information in the product documentation.
- BFGUB0027E
- Internal error: Attempting to modify property "<insert_0>" of a non-cloned configuration property.
- Severity
- 20 : Error
- Explanation
- This exception is unexpected. The cause is not immediately known.
- Response
- If the problem persists, see problem determination information in the product documentation.
- BFGUB0028E
- An attempt to write property file ''<insert_0>'' into directory ''<insert_1>'' failed as the directory path is not present.
- Severity
- 20 : Error
- Explanation
- The named property file could not be written to the given directory as the directory path is not present or this command does not have permission to write to that directory.
- Response
- Check that the property name exists and that IBM MQ Managed File Transfer has permission to write the file.
- BFGUB0029E
- The property file "<insert_0>" had the following exception while reading "<insert_1>"
- Severity
- 20 : Error
- Explanation
- The attempt to read the properties in the named file has failed and the command cannot successfully complete.
- Response
- Check that the file name exists and that IBM MQ Managed File Transfer has permission to read the file.
- BFGUB0030E
- Internal error : Attempt to generate configuration root failed with exception "<insert_0>"
- Severity
- 20 : Error
- Explanation
- This exception is unexpected. The cause is not immediately known.
- Response
- If the problem persists, see problem determination information in the product documentation.
- BFGUB0031E
- Internal error: Attempt to generate configuration root for unsupported structure type: "<insert_0>"
- Severity
- 20 : Error
- Explanation
- CMSG00001
- Response
- If the problem persists, see problem determination information in the product documentation.
- BFGUB0032E
- Attempt to update the properties in ''<insert_0>'' failed as the file is not present or accessible.
- Severity
- 20 : Error
- Explanation
- CMSG00001
- Response
- If the problem persists, see problem determination information in the product documentation.
- BFGUB0033E
- Attempt to update properties in ''<insert_0>'' failed to exception: <insert_1>
- Severity
- 20 : Error
- Explanation
- CMSG00001
- Response
- If the problem persists, see problem determination information in the product documentation.
- BFGUB0034E
- Property ''<insert_0>'' was expected to be in numeric format, but it is not present in the configuration and does not have a default value.
- Severity
- 20 : Error
- Explanation
- The named property is missing and the command might not complete successfully.
- Response
- Check that the named property exists and that IBM MQ Managed File Transfer has permission to read the file.
- BFGUB0035E
- The following required property file is missing: ''<insert_0>''
- Severity
- 20 : Error
- Explanation
- The named property file is missing but is required for successful completion of the command.
- Response
- Check that any previous command that might have changed the configuration has completed correctly.
- BFGUB0036E
- Internal error: The property name ''<insert_0>'' has an invalid boolean value of ''<insert_1>''
- Severity
- 20 : Error
- Explanation
- This exception is unexpected. The cause is not immediately known.
- Response
- If the problem persists, see problem determination information in the product documentation.
- BFGUB0037E
- Internal error: The property name ''<insert_0>'' has an invalid boolean value of ''<insert_1>''
- Severity
- 20 : Error
- Explanation
- This exception is unexpected. The cause is not immediately known.
- Response
- If the problem persists, see problem determination information in the product documentation.
- BFGUB0038E
- Internal error: The property name ''<insert_0>'' has an invalid or missing string value
- Severity
- 20 : Error
- Explanation
- This exception is unexpected. The cause is not immediately known.
- Response
- If the problem persists, see problem determination information in the product documentation.
- BFGUB0039E
- A required property of ''<insert_0>'' is missing from the properties.
- Severity
- 20 : Error
- Explanation
- The named property is required for this command to complete successfully.
- Response
- Review the associated property file and either add this property or correct this property.
- BFGUB0040E
- Internal error: Property type ''<insert_0>'' requires a coordination value in method ''<insert_1>''.
- Severity
- 20 : Error
- Explanation
- This exception is unexpected. The cause is not immediately known.
- Response
- If the problem persists, see problem determination information in the product documentation.
- BFGUB0041I
- The process is stopping because of errors previously reported in the properties.
- Severity
- 0 : Information
- Explanation
- The process is stopping, it cannot run because of the previously reported errors.
- Response
- Review the previously reported errors.
- BFGUB0042E
- The properties and configuration tree cannot be located.
- Severity
- 20 : Error
- Explanation
- IBM MQ Managed File Transfer is unable to locate any of its properties or its configuration in the expected location. This command cannot complete successfully.
- Response
- If there has been a recent installation, check the logs and ensure all associated components have been installed and configured. If the configuration has been manually changed recently, review those changes.
- BFGUB0043W
- The given property value for ''<insert_0>'' is not valid because it contains control characters. This usually occurs if the backslash character has not been escaped.
- Severity
- 10 : Warning
- Explanation
- When inputting property values that contain a backslash character (for example, a Windows path name), these values must be escaped to ensure they are passed through as expected.
- Response
- Replace all occurrences of the backslash '\\' with a double-backslash '\\\\' in the referenced property value.
- BFGUB0044E
- Internal error: The required property file "<insert_0>" is missing. The command cannot successfully complete.
- Severity
- 20 : Error
- Explanation
- This exception is unexpected. The cause is not immediately known.
- Response
- If the problem persists, see problem determination information in the product documentation.
- BFGUB0045E
- The attempt to property read file "<insert_0>" failed with exception "<insert_1>"
- Severity
- 20 : Error
- Explanation
- While loading the IBM MQ Managed File Transfer configuration, an attempt to read the named file has failed. The command cannot complete.
- Response
- Check that the named file exists and that IBM MQ Managed File Transfer has permission to read the file.
- BFGUB0046E
- The property name "<insert_0>" has an invalid numeric value of "<insert_1>"
- Severity
- 20 : Error
- Explanation
- The named property must be a valid numeric value for the command to successfully complete.
- Response
- Review the associated property file and change the property so that is has a valid numeric value.
- BFGUB0047W
- The property name "<insert_0>" in file "<insert_1>" is not a valid MQMFT property and will be ignored.
- Severity
- 10 : Warning
- Explanation
- MQMFT does not support the specified property. The property will be ignored.
- Response
- Remove the specified property from the properties file.
- BFGUB0048E
- The attempt to create directory ''<insert_0>'' was not successful.
- Severity
- 20 : Error
- Explanation
- The command could not complete successfully because the directory path specified could not be created.
- Response
- Check that the IBM MQ Managed File Transfer configuration structure has not been corrupted and that the command has permission to create the directory path.
- BFGUB0049E
- The attempt to create a ''<insert_0>'' property file in directory ''<insert_1>'' could not be completed because a property file already exists and the force overwrite parameter (-f) was not specified.
- Severity
- 20 : Error
- Explanation
- The command could not complete successfully because the property file specified already exists in the named directory.
- Response
- Check the correct property file name has been specified and use the -f parameter to force an overwrite of the property file.
- BFGUB0050E
- The coordination ''<insert_0>'' cannot be located.
- Severity
- 20 : Error
- Explanation
- The specified coordination name does not exist in the IBM MQ Managed File Transfer configuration structure. As a result, this command cannot complete successfully.
- Response
- Review the specified coordination name and correct as necessary.
- BFGUB0051E
- The agent ''<insert_0>'' cannot be located in the configuration directory structure.
- Severity
- 20 : Error
- Explanation
- The agent name specified does not exist in the IBM MQ Managed File Transfer configuration directory structure. As a result, this command cannot complete successfully.
- Response
- Review the specified agent name and correct as necessary.
- BFGUB0052E
- The agent ''<insert_0>'' cannot be located in the logs directory structure.
- Severity
- 20 : Error
- Explanation
- The agent name specified is not present in the IBM MQ Managed File Transfer configuration directory structure. As a result, this command cannot complete successfully.
- Response
- Review the logger name and correct as necessary.
- BFGUB0053E
- The logger ''<insert_0>'' cannot be located in the configuration directory structure.
- Severity
- 20 : Error
- Explanation
- The logger name specified does not exist in the IBM MQ Managed File Transfer configuration directory structure. As a result, this command cannot complete successfully.
- Response
- Review the logger name and correct as necessary.
- BFGUB0054E
- The installation name ''<insert_0>'' is invalid and cannot be used in this command.
- Severity
- 20 : Error
- Explanation
- The installation name specified is not valid and the command cannot complete successfully.
- Response
- Review the installation name and ensure that it is correct and that it matches the guidelines specified in IBM Documentation
- BFGUB0055E
- The queue manager name ''<insert_0>'' is invalid and cannot be used in this command.
- Severity
- 20 : Error
- Explanation
- The queue manager name specified is not valid and the command cannot complete successfully.
- Response
- Review the queue manager name and ensure that it is correct and that it matches the guidelines specified in IBM Documentation
- BFGUB0056E
- The agent name ''<insert_0>'' is invalid and cannot be used in this command.
- Severity
- 20 : Error
- Explanation
- The agent name specified is not valid and the command cannot complete successfully.
- Response
- Review the agent name and ensure that it is correct and that it matches the guidelines specified in IBM Documentation
- BFGUB0057E
- The logger name ''<insert_0>'' is invalid and cannot be used in this command.
- Severity
- 20 : Error
- Explanation
- The logger name specified is not valid and the command cannot complete successfully.
- Response
- Review the logger name and ensure that it is correct and that it matches the guidelines specified in IBM Documentation
- BFGUB0058E
- The attempt to update the configuration failed because the coordination ''<insert_0>'' could not be located. The command will not complete successfully.
- Severity
- 20 : Error
- Explanation
- The IBM MQ Managed File Transfer configuration could not be updated because the coordination specified does not exist in the configuration.
- Response
- Review the coordination name and review whether the IBM MQ Managed File Transfer configuration might have been corrupted.
- BFGUB0059E
- The attempt to update the configuration failed because the coordination property file ''<insert_0>'' could not be located. The command will not complete successfully.
- Severity
- 20 : Error
- Explanation
- The IBM MQ Managed File Transfer configuration could not be updated because the coordination specified does not exist in the configuration.
- Response
- Review the coordination name and review whether the IBM MQ Managed File Transfer configuration might have been corrupted.
- BFGUB0060W
- The MQMFT property name "<insert_0>" is not valid in file "<insert_1>" and will be ignored.
- Severity
- 10 : Warning
- Explanation
- MQMFT does not support the property being set in the specified file. The property will be ignored.
- Response
- Remove the property from the specified properties file. If necessary, set the property in the correct MQMFT properties file.
- BFGUB0061E
- Internal error: attempt to update properties to file when no original file based properties were loaded.
- Severity
- 20 : Error
- Explanation
- CMSG001
- Response
- CMSG002
- BFGUB0062E
- The logger ''<insert_0>'' cannot be located in the logs.
- Severity
- 20 : Error
- Explanation
- The given agent logger is not present in the IBM MQ Managed File Transfer configuration structure. As a result this command cannot complete successfully.
- Response
- Review the given logger name and correct as necessary.
- BFGUB0063E
- Attempt to delete agent <insert_0> cannot be completed until the agent has been stopped.
- Severity
- 20 : Error
- Explanation
- To perform a delete agent a number of files must be removed. These files are current in use by the named agent and cannot be deleted until the agent has been stopped.
- Response
- Use the fteStopAgent command to stop the agent.
- BFGUB0064E
- Attempt to delete logger <insert_0> cannot be completed until the logger has been stopped.
- Severity
- 20 : Error
- Explanation
- To perform a delete logger a number of files must be removed. These files are current in use by the named logger and cannot be deleted until the logger has been stopped.
- Response
- Use the fteStopLogger command to stop the logger.
- BFGUB0065E
- The property name "<insert_0>" has an invalid value of "<insert_1>". The valid values are "<insert_2>".
- Severity
- 20 : Error
- Explanation
- The named property must be a valid value for the command to successfully complete.
- Response
- Review the associated property file and change the property so that is has a valid value.
- BFGUB0066E
- The coordination ''<insert_0>'' cannot be located.
- Severity
- 20 : Error
- Explanation
- The specified coordination name does not exist in the IBM MQ Managed File Transfer configuration structure. As a result, this command cannot complete successfully.
- Response
- Review the specified coordination name and correct as necessary.
- BFGUB0067E
- The default coordination name is missing from the configuration.
- Severity
- 20 : Error
- Explanation
- The command requires a coordination reference, however none was supplied in the command arguments and the default value is either missing or corrupt.
- Response
- Review any recent changes to the IBM MQ Managed File Transfer configuration and ensure all have completed successfully.
- BFGUB0068E
- User must be an IBM MQ Managed File Transfer administrator to run this command.
- Severity
- 20 : Error
- Explanation
- The command could not successfully complete because the user requires IBM MQ Managed File Transfer administrator rights.
- Response
- User needs to be an IBM MQ Managed File Transfer administrator to execute this command.
- BFGUB0069E
- Internal error: Attempt to change permission on file <insert_0> to <insert_1> failed with exception <insert_2>.
- Severity
- 20 : Error
- Explanation
- This exception is unexpected. The cause is not immediately known.
- Response
- If the problem persists, see problem determination information in the product documentation.
- BFGUB0070E
- Internal error: Native library for platform <insert_0> (architecture <insert_1>) could not be loaded because <insert_3>. java.library.path is: <insert_2>
- Severity
- 20 : Error
- Explanation
- This exception is unexpected. The cause is not immediately known.
- Response
- If the problem persists, see problem determination information in the product documentation.
- BFGUB0071E
- Internal error: Native library for platform <insert_0> (architecture <insert_1>) could not be loaded. java.library.path is: <insert_2>
- Severity
- 20 : Error
- Explanation
- This exception is unexpected. The cause is not immediately known.
- Response
- If the problem persists, see problem determination information in the product documentation.
- BFGUB0072E
- The configuration directory of <insert_0> cannot be accessed therefore the command cannot be successfully completed.
- Severity
- 20 : Error
- Explanation
- The root directory for configuration cannot be located. This command cannot complete successfully and no further configuration can be created.
- Response
- Check to see if the directory given is present and that this command has permission to access the directory. If the directory is missing then review the installation logs to ensure any previous installation completed successfully.
- BFGUB0073E
- An attempt to force replace property file <insert_0> in directory <insert_1> could not be completed as this user does not have permission to replace the existing file.
- Severity
- 20 : Error
- Explanation
- This command was attempting to replace an existing property, but the user do not have sufficient permission to remove the existing property file and as a a result the command could not be completed successfully.
- Response
- Check the current ownership and permission setting of the property file to be replace and correct as necessary.
- BFGUB0074E
- Internal error: Request to validate a null coordination name.
- Severity
- 20 : Error
- Explanation
- This exception is unexpected. The cause is not immediately known.
- Response
- If the problem persists, see problem determination information in the product documentation.
- BFGUB0075E
- The property set <insert_0> in directory <insert_1> is not present or you do not have read access to that coordination.
- Severity
- 20 : Error
- Explanation
- A request to access a property set configuration has not been successful as the named property set is either not present in the configuration directory or the user does not have permission to read that configuration.
- Response
- Review the given property set name and correct as necessary or if correct check the file permissions of the coordination directory.
- BFGUB0076E
- The property set <insert_0> is missing or unable to read the coordination.properties file in directory <insert_1>.
- Severity
- 20 : Error
- Explanation
- A request to access a property set configuration has not been successful. The named coordination directory is present, but the coordination.properties file is either missing or the user does not have sufficient access to read the file.
- Response
- Check that the coordination.properties file is present in the named directory. If it is not, then recover from a backup or regenerate using the fteSetupCoordination command. If the file is present, check that the user has at least read access to the file.
- BFGUB0077E
- The property set <insert_0> is missing or unable to read the command.properties file in directory <insert_1>.
- Severity
- 20 : Error
- Explanation
- A request to access a property set configuration has not been successful. As the named coordination directory is present, but the command.properties file is either missing or the user does not have sufficient access to read the file.
- Response
- Check that the command.properties file is present in the named directory. If it is not, then recover from a backup or regenerate using the fteSetupCommand command. If the file is present, check that the user has at least read access to the file.
- BFGUB0078W
- The property name "<insert_0>" in file "<insert_1>" of "<insert_2>" is not a valid MQMFT property and will be ignored.
- Severity
- 10 : Warning
- Explanation
- MQMFT does not support the specified property. The property will be ignored.
- Response
- Remove the specified property from the properties file.
- BFGUB0079W
- The MQMFT property name "<insert_0>" is not valid in file "<insert_1>" of "<insert_2>" and will be ignored.
- Severity
- 10 : Warning
- Explanation
- MQMFT does not support the property being set in the specified file. The property will be ignored.
- Response
- Remove the property from the specified properties file. If necessary, set the property in the correct MQMFT properties file.
- BFGUB0080E
- A required property of ''<insert_0>'' is missing for the properties for "<insert_1>".
- Severity
- 20 : Error
- Explanation
- The named property is required for this command to complete successfully.
- Response
- Review the associated property file and either add this property or correct this property.
- BFGUB0081E
- Internal error: Unknown configuration type of <insert_0> encountered.
- Severity
- 20 : Error
- Explanation
- CMSG001
- Response
- If the problem persists, see problem determination information in the product documentation.
- BFGUB0082E
- Unsupported property ''<insert_0>'' found in property file ''<insert_1>''.
- Severity
- 20 : Error
- Explanation
- The named property has been removed from the product and its continued use is not supported. The process will not start successfully until this property is removed from the specified property file.
- Response
- Remove the unsupported property and try the command again.
- BFGUB0083W
- The property name "<insert_0>" has an invalid numeric value of "<insert_1>". The default value "<insert_2>" has been used instead.
- Severity
- 10 : Warning
- Explanation
- The named property must be a numeric value.
- Response
- Review the associated property file and change the property so that it has a valid numeric value.
- BFGUB0084W
- The property name "<insert_0>" has a value of "<insert_1>", which is not in the range between "<insert_2>" and "<insert_3>". The default value "<insert_4>" has been used instead.
- Severity
- 10 : Warning
- Explanation
- The named numeric property is present in the configuration, but has a value that is outside the valid range.
- Response
- Review the associated property file and change the value to one that is in the given ranges.
- BFGUB0085W
- The property name "<insert_0>" has an invalid Boolean value of "<insert_1>". The default value "<insert_2>" has been used instead.
- Severity
- 10 : Warning
- Explanation
- The named property has two options only and the option assigned is not valid.
- Response
- Review the associated property file and change the property to have a value of true or false, yes or no, or on or off.
- BFGUB0086W
- The property name "<insert_0>" is not a valid MQMFT property and will be ignored.
- Severity
- 10 : Warning
- Explanation
- MQMFT does not support the specified property. The property will be ignored.
- Response
- Remove the specified property from the properties file.
- BFGUB0087E
- Unsupported property ''<insert_0>'' found.
- Severity
- 20 : Error
- Explanation
- The named property has been removed from the product and its continued use is not supported. The process will not start successfully until this property is removed from the specified property file.
- Response
- Remove the unsupported property and try the command again.
- BFGUB0088E
- The configuration location <insert_0> is not writeable therefore the command cannot be successfully completed.
- Severity
- 20 : Error
- Explanation
- The configuration location is not writable for the user who issued the command. This command cannot complete successfully and no further configuration can be created.
- Response
- Check if the user issuing the command has the write permission to access the location.Review the user-id used for running the command and check the file permission of the configuration location which has to write permission for that user.
- BFGUB9999E
- <insert_0>
- Severity
- 20 : Error
- Explanation
- If this message does not give enough information, check the accompanying error messages for further information.
- Response
- For further information on resolving this error, refer to the problem determination information on the product Web site.