IBM Streams 4.3.0
Runtime services and utilities
These messages describe the conditions and problems that can occur during the processing of the runtime services and utilities.
- CDISR0001E
An unexpected error occurred in the name service. - CDISR0002E
The record_name record cannot be registered because that name already exists in the name service. - CDISR0003E
The following record name cannot be found in the name service: record_name. - CDISR0004E
The name service cannot retrieve data for record name record_name. The error is: error. - CDISR0006E
The name service cannot be started because required information about the domain ID is missing. - CDISR0007E
The name service cannot be started because required information about the name server is missing. - CDISR0008E
The name service cannot be started because required information about the instance ID is missing. - CDISR0009E
An internal error occurred because the STREAMS_NS environment variable is required, but was not configured. - CDISR0010E
The name service encountered an internal error. The following name service configuration is not valid: the_name_service_setting. - CDISR0011E
The format of the contents of the following name record is not valid: name_record_content. - CDISR0012E
The name service cannot create or access the following storage directory: storage_directory. The error is: reported_error. - CDISR0013E
The following object cannot be successfully registered to the name service: record_name. The error is: reported_error. - CDISR0014E
The following object cannot be successfully unregistered to the name service: record_name. The error is: reported_error. - CDISR0015E
The following directory cannot be successfully removed: directory_name. The error is: reported_error. - CDISR0016E
The name service cannot successfully finish the operation since directory_name is not a directory. - CDISR0017E
The name service cannot successfully register the user object with invalid applicationScope or label settings. - CDISR0500E
Processing element ID pe_identifier did not start because the ID is not valid. - CDISR0501E
The runtime services encountered an internal error. The error is: internal_msgCode. - CDISR0502E
IBM Streams encountered an error when connecting to the ZooKeeper service: ZooKeeper_connection_information. The error is: error. This error might be caused by network problems. - CDISR0506E
IBM Streams encountered a remote procedure call error when connecting to the following service: service_name. The error is: error. This error might be caused by network problems. - CDISR0700I
The property_name property for the service was set to the following value: property_value. The service is service_name. - CDISR1001E
The Streams Application Manager cannot restart the processing element ID pe_identifier. In the application source code for Job ID job_identifier, the operators that the processing element executes are configured so that they cannot be restarted. - CDISR1014E
The property_name property name was not found. - CDISR1027E
The processing element ID pe_identifier was not found. - CDISR1030E
An unexpected exception occurred in the Streams Application Manager. - CDISR1038E
An internal error occurred in the Streams Application Manager. - CDISR1039E
The Streams Application Manager is not available. - CDISR1042E
The following output port ID is not valid: output_port_identifer. - CDISR1043E
The processing element ID pe_identifier must be stopped before it can be restarted. - CDISR1044E
The following job ID was not found: job_identifier. - CDISR1049E
The property_identifier property already exists. - CDISR1101E
The Streams Application Manager cannot find the tupleType with the index_identifier index. - CDISR1102E
The Streams Application Manager cannot find the hostpool with the index_identifier index. - CDISR1103E
The Streams Application Manager cannot find the library with the index_identifier index. - CDISR1105E
The operation cannot be completed because the job ID job_identifier is in the terminating state. - CDISR1110E
The Streams Application Manager cannot route the current notification to the controller service because an older notification request is still pending. - CDISR1111E
The Streams Application Manager cannot send the routing notification because newer notifications were already sent. - CDISR1130E
The input_port_identifier input port was not declared a name-based or property-based import port. - CDISR1134E
The operation cannot be completed because job ID job_identifier is in the terminated state. - CDISR1135E
The processing elements of job ID job_identifier cannot be stopped at this time. - CDISR1137E
The Streams Application Manager cannot complete the operation because the processing element ID pe_identifier is stopping or was already stopped. - CDISR1142E
The processing element ID pe_identifier cannot be restarted. The automatic retry count of retry_count_value was exceeded. - CDISR1143E
The submission parameters in the following list are either ambiguous, missing, or not valid: parameter_values. - CDISR1144E
The job submission parameters are not correct. - CDISR1145E
The validation of the job submission parameter failed. - CDISR1146E
The following job submission parameter is required, but it is missing: parameter_value. - CDISR1147E
The following job submission parameter was specified multiple times: parameter_value. A parameter can be specified only once. - CDISR1148E
The following job submission parameter is ambiguous: parameter_value1. This job submission parameter matches parameter_value2. - CDISR1149W
The following job submission parameter is not known to the application: parameter_value. The application ignored this parameter. - CDISR1150E
An error occurred when the subscription of the input port was updated from from_value to to_value. - CDISR1151E
The name-based import subscription cannot be updated for the following import port: input_port_identifier. - CDISR1154E
The Streams Application Manager client failed to collect the job logs. The error is: error_value. - CDISR1155I
The Streams Application Manager is starting a submitjob event with application application_bundle_name. - CDISR1156I
The Streams Application Manager finished the submitjob event for the following job: job_identifier. - CDISR1157E
The following stream view ID is not valid: view_identifer. - CDISR1158E
The job cannot be submitted because the DISPLAY environment variable is not defined. - CDISR1159E
The Streams Application Manager failed to register job ID job_id with the Authentication and Authorization Service. The error is: errors. - CDISR1160E
The Streams Application Manager failed to restart a collection of Processing Elements. For more information, see the messages that follow this one. The Processing Elements are: peIdSet. - CDISR1161E
The Streams Application Manager failed to restart one or more Processing Elements. For more information, see the messages that follow this one. - CDISR1162E
The Streams Application Manager cannot open the view of the following stream: stream_id. - CDISR1164E
width is not a valid value for the width of a parallel region. - CDISR1165E
The operation cannot complete because the following job configuration parameter was specified multiple times: configuration_parameter. A parameter can be specified only once. - CDISR1166E
The operation cannot complete because the following job configuration parameter was specified: configuration_parameter. This parameter is not recognized. - CDISR1167E
The operation cannot complete because the following job name is not valid: job_name. Job names must be unique in the instance. - CDISR1168E
The operation cannot complete because checkpoint support is required for the submitted application. Set the instance.checkpointRepository and instance.checkpointRepositoryConfiguration properties for the following instance: instance_id and make sure they are valid. - CDISR1170E
The user_id user ID is not authorized to perform the following operation: operation. The user must have the following permissions for the object_name object in the instance_id instance: permission. - CDISR1171E
The transfer of the application bundle file to the hosts that run the job did not complete in the time allowed. The domain ID is: domain_id. - CDISR1172E
The operation cannot complete because capabilities support is required for the submitted application. Set the instance.canSetPeOSCapabilities and instance.runAsUser properties for the following instance: instance_id. - CDISR1174E
The application did not start because of the following error: error_explanation. - CDISR1175E
The application did not start because the configuration_parameter job configuration parameter was set to the following invalid value: configuration_parameter_value. - CDISR1176E
The application did not start because the configuration_parameter and configuration_parameter job configuration parameters are both specified. This combination of parameters is not valid for the instance. - CDISR1177E
The Streams Application Manager cannot complete the request on port port_identifier. - CDISR1179E
The operation cannot complete because the name hostpool with index index is not set up correctly. - CDISR1180E
The operator name with index index has invalid resource set up, such as empty resource setting. - CDISR1181E
The Streams Application Manager could not finish the update operators event for job job_identifier since the job is running with job_productVersion release. - CDISR1182E
The Streams Application Manager could not submit the application as the application was compiled with transport option of llm_rum_tcp or llm_rum_ib, but the instance was configured to enable encryption for transport. - CDISR1251W
The operators in the submitted application were fused by using the default legacy fusion scheme because the application was not compiled on Version 4.2, or later. - CDISR1252W
The operators in the submitted application were fused by using the specified legacy fusion scheme, but some job submission settings were ignored. - CDISR1300I
The Streams Application Manager was started. - CDISR1301I
The Streams Application Manager was shut down. - CDISR1303I
The Streams Application Manager is starting a canceljob for job ID job_identifier. - CDISR1304I
The Streams Application Manager finished the canceljob event for job ID job_identifier. - CDISR1305I
The Streams Application Manager unregistered job ID job_identifier. - CDISR1307I
The Streams Application Manager finished the stoppe event for the processing element ID processing_element_id. - CDISR1310I
The Streams Application Manager finished the stoppe event for job ID job_identifier. - CDISR1312I
The Streams Application Manager finished the restartpe event for the processing element ID processing_element_id. - CDISR1314I
The Streams Application Manager finished the restartpe event for the processing element ID processing_element_id on the host host. - CDISR1316I
The Streams Application Manager finished the restartpe event for the following job: job_identifier. - CDISR1317I
The processing element ID processing_element_id is in the running state in the Streams Application Manager. It is running with process ID pid of resource resource. - CDISR1319I
The Streams Application Manager finished the updatepe event for processing element ID processing_element_id. - CDISR1321I
The Streams Application Manager finished the updatepe event for job ID job_identifier. - CDISR1322I
The Streams Application Manager finished updating processing element ID processing_element_id with the configuration configuration. - CDISR1324I
The Streams Application Manager finished the addStreamProperty event for output port ID output_port_id. - CDISR1326I
The Streams Application Manager finished the addStreamProperties event for output port ID output_port_id. - CDISR1327I
The Streams Application Manager finished adding the properties stream properties to output port ID output_port_id. - CDISR1331I
The Streams Application Manager finished the setStreamProperties event for output port ID output_port_id. - CDISR1332I
The Streams Application Manager finished setting the properties stream properties for output port ID output_port_id. - CDISR1336I
The Streams Application Manager finished the removeStreamProperties event for output port ID output_port_id. - CDISR1337I
The Streams Application Manager finished removing the properties stream properties from output port ID output_port_id. - CDISR1339I
The Streams Application Manager finished the setSubscription event for input port ID input_port_id. - CDISR1340I
The Streams Application Manager finished setting the subscription subscription for input port ID input_port_id. - CDISR1342I
The Streams Application Manager finished the setFilter event for input port ID input_port_id. - CDISR1343I
The Streams Application Manager finished setting the filter filter for input port ID input_port_id. - CDISR1345I
The Streams Application Manager finished the openStreamView event for view ID view_id. - CDISR1346I
The Streams Application Manager finished opening the view_id view for job ID job_id. - CDISR1348I
The Streams Application Manager finished a closeStreamView event for the view_id view. - CDISR1349I
The Streams Application Manager closed the view_id view. - CDISR1351I
The Streams Application Manager finished a setStreamViewProperties event for the view_id view. - CDISR1352I
The Streams Application Manager set the view_id view with the following properties: view_properties. - CDISR1353E
The job submission for the application failed because there is more than one operator-driven start operator in a consistent region. - CDISR1354I
The following IBM Streams application host is added: host_id. - CDISR1355I
The following IBM Streams application host is removed: host_id. - CDISR1356I
The state of the resource_id resource is updated to resource_state. - CDISR1357E
The application did not start because the following configuration parameters cannot be used for the same job submission: configuration_parameter_set. - CDISR1358E
The Streams Application Manager encountered the following internal error: error_explanation. - CDISR1359E
The job submission or preview failed because the consistent region configuration contains too many start operators that are operator driven. - CDISR1360E
The application did not start because it was compiled on an IBM Streams version that is not supported by the current version. - CDISR1370E
The Streams Application Manager did not recover state data because the following error occurred: extra_error_data. - CDISR1371E
The job preview failed because of the following error: error_explanation. - CDISR1372E
The job submission or preview failed because the following operator configuration parameter is not valid: configuration_parameter. - CDISR1373E
The operation failed because the format of the following operator configuration parameter is not valid: configuration_parameter. The correct syntax is configuration_parameter_syntax. - CDISR1374E
The operation failed because an error occurred while parsing the following job configuration overlay file: path. The error is: error. - CDISR1375W
No tuples will be imported or exported for this application because it is running in standalone mode. - CDISR1376W
The annotation_name annotation is not supported in applications that are running in standalone mode. - CDISR1377W
The config_name configuration is not supported in applications that are running in standalone mode. - CDISR1378E
The application did not start because the streams::pe.display submission-time parameter or the DISPLAY environment variable is not set. - CDISR1379I
The Streams Application Manager added the name custom metric for job ID job_id. The kind of metric is: kind. This metric provides the following information: description. - CDISR1380I
The Streams Application Manager created processing element pe_id for job ID job_id. This processing element includes the following operators: operators. - CDISR1381E
The operation did not complete because the operator at index operator_index for job ID job_id was not found. - CDISR1382E
The operation did not complete for operator operator_index. The operator input port at index operator_input_port_index for job ID job_id was not found. - CDISR1383E
The operation did not complete for operator operator_index. The operator output port at index operator_output_port_index for job ID job_id was not found. - CDISR1384E
The operation did not complete for PE ID pe_id. The PE input port ID pe_input_port_id for job ID job_id was not found. - CDISR1385E
The operation did not complete for PE ID pe_id. The PE output port ID pe_output_port_id for job ID job_id was not found. - CDISR1386E
The operation did not complete because the PE connection ID pe_connection_id was not found. - CDISR1387E
The information for job ID job_id could not be retrieved because the job composite for the job was invalid. - CDISR1388E
One or more processing elements for job ID job_id did not start. - CDISR1389E
The operation did not complete because a processing element was not found for operator operator_index. - CDISR1390E
A lock was already acquired for task: task_name. - CDISR1391E
A state transition could not complete from current_state to new_state because it was invalid. - CDISR1392E
The following SPL type was unrecognized: spl_type. - CDISR1393E
The system could not retrieve the name or address of the local host. - CDISR1394E
The system could not serialize object [object]. The error message is error_message. - CDISR1395E
The system could not deserialize object [object]. The error message is error_message. - CDISR1396E
The Streams Application Manager did not recover state for recovery_object because the following error occurred: extra_error_data. - CDISR1397E
Processing element ID pe_id does not exist for job job_id. - CDISR1398I
The Streams Application Manager finished the update operators event for the following job: job_identifier. - CDISR1399E
Operator name operator_name does not exist in job job_id. - CDISR1400E
The processing elements pe_identifiers must be stopped before it can be restarted. - CDISR1402I
The following processing element (PE) IDs were started: pe_ids. The PEs are in the instance_name instance in the domain_name domain. - CDISR1403I
The following processing element (PE) IDs were stopped: pe_ids. The PEs are in the instance_name instance in the domain_name domain. - CDISR1404I
The following processing elements (PEs) were removed: old_pe_ids. The following processing elements were added: new_pe_ids. The PEs are in the instance_name instance in the domain_name domain. - CDISR1405E
The parallel region name specification name_specification is ambiguous. The name specification matches parallel_region_names for application id application_id. Only one matching logical parallel region name is allowed. - CDISR1406E
The attribute_value value is not valid for the attribute_name attribute. This attribute is in the following section: section_name. - CDISR1407E
The updateoperators operation for job id job_id failed because the following affected operators were found to be in a consistent region: operator_names. - CDISR1408E
The value of 'attribute_value' is specified for the 'attribute_name' attribute, but no target operators are specified. This attribute is in the following section in the job configuration overlay: 'section_name'. - CDISR1409E
The operator name specification name_specification does not match any operators in job job_id. - CDISR1410E
The operation failed for job job_id because the application description language (ADL) string cannot be retrieved from the application cache repository or an application resource. - CDISR1411E
The parallel region name specification name_specification does not match any parallel regions for application id application_id. - CDISR1412E
The operation failed because an updateoperators operation is in progress. - CDISR1413E
The operation failed because the value "channelIsolation" is required for the configuration setting "parallelRegionConfig" in order to change the width of a parallel region. The current value is "parallelRegionConfig_value". - CDISR1414E
The operation failed because the value "channelIsolation" is required for the configuration setting "parallelRegionConfig" in order to change the width of a parallel region. The value for the "parallelRegionConfig" setting is not set, defaults to default_parallelRegionConfig_value. - CDISR1415I
The following operators were restarted even though they were not part of the target region: operators_outside_target_region. Either they were directly connected to input or output operators within a parallel region, or they shared a Processing Element with operators that were targeted. - CDISR1416E
The operation failed because the value "channelIsolation" or "noChannelInfluence" is required for the configuration setting "parallelRegionConfig" in order to change the width of a parallel region. The current value is "parallelRegionConfig_value". - CDISR1417W
A request to add dynamic resources to the job was ignored because the request did not result in an increase to the width of a parallel region. - CDISR1418E
The operation failed because the following operators are not restarable: operator_names. - CDISR1419E
The updateoperators operation for job id job_id failed because the following affected operators were found to be configured for checkpointing: operator_names. - CDISR1575W
The runtime service cannot access the resource limit Linux user resource limit because the service encountered the following error: errors - CDISR1576W
The runtime service cannot set the resource limit Linux user resource limit because the service encountered the following error: errors. The current soft limit is soft limit and the hard limit is hard limit - CDISR1577I
For the resource limit Linux user resource limit, the runtime service raised the soft limit to match the hard limit of limit. - CDISR1578W
The runtime service cannot set the resource limit Linux user resource hard limit to hard_limit and soft limit to soft_limit because the service encountered the following error: errors. - CDISR1579I
For the resource limit Linux user resource limit, the runtime service set the hard limit to hard_limit and the soft limit to soft_limit. - CDISR1900E
The runtime software encountered the following transport error: message_code. - CDISR1901E
An error occurred in a data receiver. The error is: message_code. - CDISR1902E
The data receiver was not initialized because the system could not retrieve the name or address of the local host. - CDISR1903E
The call_name system call returned the following error code: error_code. - CDISR1904E
The argument_name argument was passed to a method, but the argument contains the following value that is either not valid or not correct: argument_value. - CDISR1905E
A program assertion failed: expression. - CDISR1906E
The system received an invalid message header: header_data. - CDISR1907E
The data stream that was received is corrupted. - CDISR1908E
A timeout occurred on a read or accept operation for a socket. - CDISR1909E
A connection to the port_name port was rejected. The error is: error_message. - CDISR1910E
While the connection was being established, the following instance ID was received: received_instance_id. The expected instance ID is: expected_instance_id. - CDISR1911E
While the connection was being established, the following unexpected magic code was received: code. - CDISR1912E
While the connection was being established, the following input port label was received: received_value. The expected label is: expected_value. - CDISR1913I
An attempt to connect to the port with the following label failed: port_label. - CDISR1914I
The connection to the port_label port succeeded after retry_count attempts. - CDISR1915E
Environment variable STREAMS_INSTANCE_ID must be defined. - CDISR1916E
Bad magic number: received magic number received, expected magic number expected - CDISR1917E
Unexpected data length data length - CDISR1918E
Unexpected prefix length prefix length - CDISR1919E
Incorrect bool encoding value encoding value - CDISR1920E
Port name is missing - CDISR1921E
Instance ID is missing - CDISR1922E
Bad line end: received received line end, expected received line end - CDISR1923E
Could not decode a class from buffer buffer - CDISR1924E
Unexpected instance ID: received received instance ID, expected expected instance ID - CDISR1925E
Unexpected input port label: received received port label, expected expected port label - CDISR1926E
Unexpected IO Exception - CDISR1927E
Unexpected Distillery Exception - CDISR1928E
RUM exception received from LLM - CDISR2011E
The host_identifier host ID is not valid. - CDISR2066E
A job ID must be specified. - CDISR2067E
A PE ID must be specified. - CDISR2068E
An operator name must be specified. - CDISR2069E
An port index must be specified. - CDISR2070E
Resource not found - resource_id. - CDISR2252I
IBM Streams is attempting to add the host_id host to the following instance: instance_id. - CDISR2253I
IBM Streams successfully added the host_id host to the following instance: instance_id. - CDISR2254I
IBM Streams is attempting to remove the host_id host from the following instance: instance_id. - CDISR2255I
IBM Streams successfully removed the host_id host from the following instance: instance_id. - CDISR2277I
The Streams Resource Manager service was started successfully. - CDISR2278I
The Streams Resource Manager service was shut down successfully. - CDISR2500E
An unexpected internal error occurred in the Authentication and authorization service. - CDISR2503E
The specified user name or the specified password is not valid. - CDISR2518E
You do not have the authority to use this domain. - CDISR2523E
The authentication key is not valid. - CDISR2539E
The session is not valid, or the session has expired. - CDISR2542E
You cannot remove the following object: object_identifier. - CDISR2543E
The following object already exists: object_identifier. - CDISR2545E
The Authentication and Authorization Service cannot be contacted. - CDISR2546E
The Authentication and Authorization Service cannot be contacted. An unexpected exception occurred. - CDISR2559E
The authentication by key operation failed. - CDISR2567E
The following object name contains characters that are not ASCII characters: object_value. - CDISR2569E
The key files that are used for authentication cannot be found, or cannot be opened. - CDISR2570E
An error occurred during the authentication by key operation. The error is: error_value. - CDISR2590E
The user does not have the operation_identifier permission for the object_identifier object in the instance_identifier instance. - CDISR2596E
The Authentication and Authorization Service is currently busy for domain domain_name. - CDISR2597E
The credential or token has expired. - CDISR3000E
The application definition file cannot be interpreted. - CDISR3008E
The processing element ID pe_id has both isolation attributes and colocation attributes defined for it. - CDISR3009E
For the processing element ID pe_id, the exlocation attributes and the collocation attributes conflict. - CDISR3011E
The processing element ID pe_id was not found in the application definition. - CDISR3013E
The specified instance does not contain hosts that can be scheduled. - CDISR3018E
The operation failed because the following inPoolIndex value for hostpool hostPoolIndex is not valid: inPoolIndex. - CDISR3019E
The operation failed because explicit host members cannot be specified for hostpool hostPoolIndex. - CDISR3020E
The operation failed because the following internal property is not in the correct format: placementStrategy. - CDISR3021E
The operation failed because the following internal property is not in the correct format: composingStrategy. - CDISR3022E
The operation failed because the following host is not found: host_id. - CDISR3023E
The operation failed because the following host cannot be a member of multiple exclusive hostpools: host_id. - CDISR3024E
The operation failed because an internal job schedule object is not in the correct format. - CDISR3026E
The processing element ID pe_id cannot be moved from the host_1_name host to the host_2_name host because the processing element definition specifies that it cannot be relocated. - CDISR3027E
The job submission, or processing element restart, failed. A placement that meets the constraints of all the processing elements was not found. - CDISR3028E
The specified recommendation scope of rec_scope is not valid. - CDISR3029E
The scope_id scope ID of the instance-scoped recommendation is not valid. - CDISR3030E
You cannot request the performance recommendations for a host host_id that cannot run jobs. - CDISR3031E
Job ID job_id of the job-scoped recommendation is not valid. - CDISR3033E
Hostpool index hostpool_index is not valid. - CDISR3034E
The operation failed because a required size parameter is missing in the explicit hostpool definition of hostpool hostpool_index. - CDISR3035W
requested_count processing elements were requested, but the number of processing elements submitted was actual_count. - CDISR3040I
Job ID job_id was scheduled. - CDISR3041E
The operation failed because the PE placement constraints cannot be met. For more information, see the messages that follow this one. - CDISR3042E
The preliminary verification of the constraints of job ID job_id indicates that not all the constraints can be met. For more information, see the messages that follow this one. - CDISR3043I
The following processing elements must run on one of the following hosts. The processing elements are: pe_id_list. The hosts on which the processing elements must run are: host_name_list. For more information, see the messages that follow this one. - CDISR3044E
The following processing elements must run on the same host, but these processing elements cannot be scheduled on the same host: pe_id_list. For more information, see the messages that follow this one. - CDISR3045I
The processing element ID pe_id is constrained to be scheduled from the following hosts: host_name_list. For more information, see the messages that follow this one. - CDISR3046E
The processing element ID pe_id cannot be scheduled. For more information, see the messages that follow this one. - CDISR3047I
A constraint on the operator_name operator requires that it be scheduled from the following hosts: host_name_list. For more information, see the messages that follow this one. - CDISR3048E
The operator_name operator cannot be scheduled. For more information, see the messages that follow this one. - CDISR3049E
The operation can not be performed on resource_name. The following processing elements are currently placed on this resource for instance instance_name in domain domain_name and there is no other resource placement alternatives: pe_id_list. - CDISR3050I
The host_name host was included in the scheduling process because the absolute location of the host was specified. - CDISR3051I
The following hosts were included in the scheduling process because the hosts are eligible to be included in the hostpool_name hostpool by having the following tags. The hosts are: host_name_list. The tags that are shared by the hosts are: host_tag_list. - CDISR3052I
The following hosts were included in the scheduling process because the hosts are indexed in the hostpool_name hostpool with the following tags. The hosts are: host_name_list. The tags that are shared by the hosts are: host_tag_list. - CDISR3053I
Because the processing element cannot be relocated, the host_name host on which it runs was included in the scheduling process. - CDISR3054I
Because the processing element is not affected by this operation, the host_name host on which it runs was included in the scheduling process. - CDISR3055I
Because the host_name host was specified as an override in the command, the host was included in the scheduling process. - CDISR3060I
Because the following hosts are in an exclusive hostpool, these hosts cannot be included in the scheduling process. The hosts are: host_name_list. - CDISR3061I
Because the following hosts are already hosting a processing element, and are therefore not eligible for an exclusive hostpool, these hosts cannot be included in the scheduling process: host_name_list. - CDISR3062I
Because the following hosts have one or more utilization metrics above the threshold, these hosts cannot be included in the scheduling process: host_name_list. - CDISR3063I
Because the following hosts already host a processing element, and therefore cannot host an operator that has a host isolation constraint, these hosts cannot be included in the scheduling process: host_name_list. - CDISR3064I
Because the following hosts are not in the correct state to be scheduled, these hosts were removed from the scheduling process: host_name_list. - CDISR3065I
Because the following hosts are not in the current instance, these hosts cannot be included in the scheduling process: host_name_list. - CDISR3066I
Because the following hosts are not supported by all the operators in the partition, these hosts cannot be included in the scheduling process: host_name_list. - CDISR3067I
Because the following hosts are not supported by all the operators that share a host colocation constraint, these hosts cannot be included in the scheduling process: host_name_list. - CDISR3068I
Because the following hosts already host an operator that shares a host exlocation constraint, these hosts cannot be included in the scheduling process: host_name_list. - CDISR3069I
Because the following hosts are already referenced by a different hostpool index, these hosts cannot be included in the scheduling process: host_name_list. - CDISR3070I
None of the hosts can be found in the hostpool_name hostpool. By checking the instance configuration, ensure that the hosts with the following tags are configured and started. The tags are: host_tag_list. - CDISR3071I
Because the following hosts are currently hosting an operator that has a host isolation constraint, these hosts cannot be included in the scheduling process. The hosts are: host_name_list. - CDISR3072I
Because the composite tag set tag_set for Processing Element pe_id does not meet the tag restriction set restriction_tag_set, the following host cannot be included in the scheduling process host_name. - CDISR3073I
Because the following hosts are not associated with the target region of the job to be scheduled, these hosts were removed from the scheduling process: host_name_list. - CDISR3080I
The compute PE restart recommendations were requested for a scope of recommendation_scope and a scope ID of scope_id. - CDISR3081I
The request for compute PE restart recommendations was completed. - CDISR3083I
The compute placement operation started for job ID job_id and job name job_name. - CDISR3084I
The compute placement operation for the job was completed. - CDISR3085E
The compute placement operation for the job failed. - CDISR3086I
The compute placement operation started for processing element ID pe_id and job ID job_id. - CDISR3087I
The compute placement operation for the processing element is finished. - CDISR3089I
The compute placement operation started for processing element ID pe_id and job ID job_id on the host_name host. - CDISR3090I
The compute placement operation started for the processing element on the host. - CDISR3200E
One or more processing elements were not created from the specified operator sets. - CDISR3201E
To be fused, all operators must specify the same value for the Restartable attribute. - CDISR3202E
To be fused, all operators must specify the same value for the Relocatable attribute. - CDISR3203E
The operator cannot be fused with any other operator because partitionIsolation is set to true. - CDISR3204E
An operator with the partition_exlocation_group_id group ID and partitionExlocation specified cannot be fused with any other operator that specifies the same group ID. - CDISR3205E
To be fused, all operators must reference exclusive hostpool exclusive_hostpool_index. Only actual_number_of_operators_in_pool of expected_number_of_operators_in_pool operators satisfy this requirement. - CDISR3206E
To be fused, all operators must specify the same provision location value for the provision_location_id internal property. Possible values are: provision_location_values. - CDISR3207E
To be fused, all operators must specify the same segregated location value for the segregated_location_id internal property. Possible values are: segregated_location_values. - CDISR3208E
To be fused, all operators must specify the segregated_location_id internal property with the following value: segregated_value. Only actual_number_segregated of expected_number_segregated operators satisfy this requirement. - CDISR3209E
To be fused, all operators must specify the same host constraints. The host constraints are: host_specification_set. - CDISR3210E
Operators that reference the hostpool with index hostpool_index cannot be fused with other operators that reference the same hostpool with a different index in_pool_index_set. - CDISR3211E
Operators with the same hostExlocation group ID specified or implied cannot be fused. The group ID is exlocation_id. - CDISR3212I
The following constraints are specified for the operator_name operator: constraints. - CDISR3213I
Details about the operator constraints for the application_bundle_name application bundle are in messages that follow this message. - CDISR3214I
The operator fusion sets for the application_bundle_name application bundle were created by using the following fusion configuration parameters: fusion_parameters. - CDISR3215I
A processing element will be fused from the following operator set: operator_names. - CDISR3216E
No processing elements were created from the following operator set: operator_names. - CDISR3217E
The following job contains one or more processing elements that cannot be fused: job_name. - CDISR3218E
The required attribute_name attribute is not in the section_name section or has no members. - CDISR3219E
The operator_name value is not unique for the attribute_name attribute. This attribute is in the following section: operator_section. - CDISR3220E
Multiple resource configurations are not allowed for the operator_name operator. - CDISR3221E
The following inPoolIndex value for the operator_name operator is not valid: inPool_index. This value is not allowed or is too large for the hostpool. - CDISR3222E
The size_value value is not valid for the size_attribute attribute. This attribute may have been specified as a command parameter or in the following section of the job configuration overlay file: section_name. - CDISR3223E
Both the first_attribute_name attribute and the second_attribute_name attribute are not allowed in the following section: section_name. - CDISR3224E
The attribute_name attribute must be specified for the following information: section_attribute and section_name. - CDISR3225E
The constraint_name constraint cannot be applied to the following operator: operator_name. - CDISR3226I
A processing element will be created from the following operator set: operator_names. This processing element will be placed on the host_name host and have the following host tagging requirements: tag_set. - CDISR3227I
A processing element will be created from the following operator set: operator_names . This processing element will be placed on the host_name host and have the following host tagging requirements: tag_set. The candidate hosts are: host_set. - CDISR3228I
The operator_name operator has the following attributes: attribute_set. - CDISR3229I
A group_type group is defined for the following operators: operator_names. - CDISR3230I
A hostpool is defined with the following operators: operator_names. The operator attributes are: attribute_set. - CDISR3231E
Operators that have hostIsolation specified cannot be fused with operators that have hostColocation specified. - CDISR3232E
The operation failed because the operator_name operator name is not known for this application. - CDISR3233E
The operation failed because the job submission configuration is not valid. - CDISR3234E
The operation failed because the operator_name operator is specified more than once in the section_name section. - CDISR3235E
The operation failed because the required keyword_name keyword is missing in the section_name section. - CDISR3236E
The operation failed because a JSON error was detected when parsing the job configuration overlay file. Cause: cause Job configuration overlay: job_configuration_overlay_contents - CDISR3237E
The operation failed because the following pool placement group name is not valid: name. The group name cannot use the IBM Streams reserved prefix of STREAMS_HP. - CDISR3238I
The operator_name operator has related constraints because it is host co-located with one or more of the target operators. The constraints are: constraints. - CDISR3239E
Operator group group_name of type group_type contains the following operators that are not members of the set of target operators: opNameSet. - CDISR3240E
The following operators were specified that are not members of the set of target operators: opNameSet. - CDISR3241E
The fieldNameSet fields are not allowed to be specified in the JobConfigurationOverlay for a updateOperators operation. - CDISR3242E
Resources for job job_id are not able to be made more exclusive because they are currently being shared by the following jobs: job_set. - CDISR3243E
The following resources resource_id_set were not able to be removed from job job_id because they are not currently assigned to the job. - CDISR3244W
A resource with the following tagging requirement was requested but was not able to be satisfied: resource_tagging_requirement. - CDISR3245W
Based on the numberOfResourcesToRequest or numberOfResourcesToBeAdded value specified in the job configuration overlay file, the scheduler requested requested_num_resources resources to be added to the job, but only actual_num_resources were able to be granted. The tagging requirement that was requested was: resource_tagging_requirement. - CDISR3246E
The operation failed because there are multiple adjustment subsections specified in the section_name section of the job configuration overlay. - CDISR3247I
The user request for num_requested_resources new resources was truncated to num_truncated_resources as this is the limit of resources usable by the job. - CDISR3248I
The following resources were released from the job job_id because they are not currently hosting any Processing Elements unused_resources. - CDISR3249E
Explicit hosts are not allowed to be specified when instance has applicationResourceAllocationMode property set to job. - CDISR3250W
The behavior for the property_name instance property has changed in the release_id release and may require adjustments to the configuration of the instance to maintain similar behavior. - CDISR3251W
The provided parm_name parameter is not supported in the current mode. It will be ignored. - CDISR3252W
Based on an operatorsPerResource value of ops_per_resource, the scheduler requested requested_num_resources resources to be added to the job, but only actual_num_resources were able to be granted. The tagging requirement that was requested was: resource_tagging_requirement. - CDISR3253W
Based on minimum of resources needed to support the requirements for job, the scheduler requested requested_num_resources resources to be added to the job, but only actual_num_resources were able to be granted. The tagging requirement that was requested was: resource_tagging_requirement. - CDISR3500E
The service of the processing element container for processing element ID processing_element_id was forced to shut down because the typical shut down operation for the processing element application did not succeed. - CDISR3501E
The service of the processing element container for processing element ID processing_element_id was forced to shut down because the typical shut down operation for the service of the processing container did not succeed. - CDISR3502E
The Controller service failed to run setcap command for processing element ID processing_element_id. The error is: error. - CDISR3503E
The Controller service cannot start the following processing element ID: processing_element_id. The error is: error. - CDISR3504E
Processing element ID processing_element_id in the instance_id instance is already running. - CDISR3505E
Processing element ID processing_element_id in the instance_id instance is already stopped. - CDISR3506E
The processing element logs for job ID job_id cannot be deleted. This job is in the instance_id instance. - CDISR3700W
The Host Controller service cannot contact the Streams Application Manager. The error is: error. - CDISR3702W
The Host Controller service cannot contact the Streams Resource Manager. The error is: error. - CDISR3704W
Data directory data_directory for PE pe_id of job job_id does not exist. - CDISR3800I
The host_controller_service Host Controller service was started. - CDISR3802I
The processing element ID processing_element_id of the job_name job with ID job_id was started on the host host by the submitter user with process ID process_id, it is running with Streams release streams_release. - CDISR3803I
The processing element ID processing_element_id of the job_name job which ran with process ID process_id was stopped on the host host. - CDISR4000E
The processing element ID processing_element_id of the job_name job with job ID job_id was submitted by the job_submitter user, and then was shut down unexpectedly. The error is: error. - CDISR4001E
Processing element ID processing_element_id started but then failed with the following error: error. - CDISR4200W
The service of the processing element container for processing element ID processing_element_id cannot contact the Controller service. The error is: error. - CDISR4302I
Processing element ID processing_element_id was shut down. The latest metrics are: nCpuMilliseconds=nCpuMilliseconds_metric, nMemoryConsumption=nMemoryConsumption_metric. - CDISR4303I
The tracing configuration for the processing element ID processing_element_id was updated to a value of tracing_value. - CDISR4304I
The log level for the processing element ID processing_element_id was updated to a value of log_level_value. - CDISR4307I
The processing element ID processing_element_id of the job_name job with job ID job_id was submitted by the job_submitter user, and has shut down. - CDISR4308E
The processing element ID processing_element_id was shut down because of an unexpected error. The error is: error. - CDISR4309I
The properties of the application_configuration application configuration for the following processing element ID are updated: processing_element_id. The updated property values are property_values. - CDISR4310I
The properties of the application_configuration application configuration for the following processing element ID were removed: processing_element_id. - CDISR4311E
Application bundle bundle_id failed to deploy on resource resource_id. Cause: cause - CDISR4312E
Failed to deploy application on resource resource_id. Missing application bundle ID in download request. - CDISR4313E
Application bundle bundle_id failed to deploy on resource resource_id. The bundle is not installed in the domain. - CDISR4314E
Failed to install and register application bundle bundle_id on resource resource_id. Cause: cause - CDISR4315E
Failed to download application bundle bundle_id on resource resource_id. Failed resources: failed_resources - CDISR4316E
Failed to clean up application storage on resource reeource_id. Cause: cause - CDISR4317E
Download request for file_name from resource request_reeource_id to resource target_resource_id failed. Cause: cause - CDISR4318E
Failed to prepare invocation directory for job job_id PE pe_id on resource resource_id. Cause: cause - CDISR4319E
Failed to install application ID bundle_id on resource resource_id. Cause: cause - CDISR4320E
Failed to install application ID bundle_id on resource resource_id. - CDISR4321E
Failed to unpack application bundle bundle_path on resource resource_id. Cause: cause - CDISR4322E
Failed to prepare working directory for job job_id while trying to deploy application on resource resource_id. Cause: cause - CDISR4323E
Failed to prepare working directory for job job_id while trying to deploy application on resource resource_id. - CDISR4324E
Failed to prepare application landing zone directory while trying to deploy application on resource resource_id. Cause: cause - CDISR5000E
The following message cannot be loaded: message index. The default message will be loaded. - CDISR5001E
The string literal is not valid because the following leading byte of the multibyte UTF-8 character is not correct: 0xhex value of the first byte. - CDISR5002E
The string literal is not valid because the following trailing byte of the multibyte UTF-8 character is not correct: 0xhex value of the last byte. - CDISR5003E
The string literal is not valid because the following number of bytes in the multibyte UTF-8 character is incorrect: number of actual bytes. - CDISR5004E
The string literal is not valid because the trailing surrogate is missing from the \u sequence. - CDISR5005E
The string literal is not valid because the \u sequence in the string literal ends with a partial unicode character. - CDISR5006E
The string literal is not valid because the unicode character of the \u sequence contains an incorrect character. - CDISR5007E
The string literal is not valid because the trailing surrogate in the \u sequence is not correct. - CDISR5008E
The string literal is not valid because the code unit in the \u sequence does not contain a valid character in the Basic Multilingual Plane. - CDISR5009E
The string literal is not valid because it is not enclosed in single quotation marks (') or double quotation marks ("). - CDISR5010E
The string literal is not valid because it ends with the following escape character: \. - CDISR5011E
The lower bound of the slice of a string is lower bound. This lower bound is larger than the size of the string, which is number of actual characters. - CDISR5012E
A window received an unexpected punctuation. - CDISR5013E
The window configuration is not valid. A sliding window cannot have a punctuation-based eviction policy. - CDISR5014E
The window configuration is not valid. A sliding window cannot have a punctuation-based trigger policy. - CDISR5015E
The output port index requested index is outside the valid range of [0..maximum valid index). - CDISR5016E
The submitted tuple type tuple type does not match the output port type port type at the following port index: output port number. - CDISR5017E
A constant tuple cannot be sent to a mutating port at the following index: output port number. - CDISR5018E
A StreamProperty of the StreamProperty type type is passed a value of the access value type type. - CDISR5019E
The standalone program cannot open the following ADL file: pathname to ADL file. The error is: error. - CDISR5020E
The pathname to ADL file ADL file cannot be loaded. The error is: error. - CDISR5021E
The following value for the submission time parameter is missing: submission time parameter value. - CDISR5023E
The file pathname output file did not open. The error is: error. - CDISR5024E
An error occurred while the XMLParse operator parsed the XML input that is used to generate the following output stream: output stream number. The generation of the tuple was suppressed. - CDISR5025E
The following error occurred during XML parsing: XML parse error. - CDISR5026E
The file pathname input file did not open. The error is: error. - CDISR5027E
The delay time for the following tuple number cannot be read: tuple number. - CDISR5028E
The read of the SPL type of the tuple type failed for the following tuple number: tuple number. - CDISR5029E
During the read of tuple number tuple number, where source character was found, the expected character character was expected, but the source character character was found. - CDISR5030E
An exception occurred during the execution of the operator name operator. The exception is: exception - CDISR5031E
A TCP server or UDP source operator cannot bind to the following port: port number or service name. The error is: error. - CDISR5032E
A TCP server or a UDP source operator cannot register the following name: name. The error is: error. - CDISR5033E
An exception occurred during the execution of the operator name operator. Processing element number processing element number is terminating. - CDISR5034E
A blob that references external memory must not be modified. - CDISR5035E
A TCP client or a UDP sink operator cannot resolve the following name: name. - CDISR5036E
An internal error occurred for payload name payload name. - CDISR5037E
The value shutdown duration specified for the -k or the kill-after option is not valid. The expected value is a positive floating point number. - CDISR5038E
An internal error occurred at input port number port number for operator operator name. - CDISR5039E
An internal error occurred at output port number port number for operator operator name. - CDISR5040E
An internal error occurred at operator operator name. - CDISR5044E
The submission time parameter name parameter name is ambiguous within the list of required parameters: required parameter names. - CDISR5045W
Warning: The following submission time name is not referenced: parameter name. - CDISR5046E
The character encoding name character set encoding is not known.. - CDISR5047E
The call to the submit routine from the constructor of the operator for the following port index is not valid: port number. - CDISR5048E
The standalone application cannot load the ADL file. - CDISR5049W
A count-based trigger size of count trigger value is specified, but it is not valid. The only valid size is 1. - CDISR5050E
The operator cannot find the key value key in the index file pathname mapping file, and a default key is not specified. - CDISR5051E
The operator kind operator cannot parse the indices in the following map line: mapping file line. - CDISR5052E
The operator kind operator cannot extract the key in the following line of the map: mapping file line. - CDISR5053E
Runtime failures occurred in the following operators: failed operators. - CDISR5054E
The operator kind operator has duplicate keys in the following line of the map: mapping file line. - CDISR5055E
The shared library name shared library cannot be loaded. The error is: error code. - CDISR5056E
The entry point name entry point cannot be located. The error is: error code. - CDISR5057E
The conversion from the value string to a C++ type of C++ type did not succeed. - CDISR5058E
The hostname hostname or the port name or number port cannot be resolved. The error is: error. - CDISR5059E
The interface name interface cannot be resolved. - CDISR5061E
An internal error occurred. - CDISR5062E
In the selectFromList routine, the selector size of selector list size does not match the input size of input list size. - CDISR5063E
The parameter name argument to the slice routine is negative. - CDISR5064E
The kthelem index value of index number is outside the bounds of the indexed list. The bounds are [0..size of indexed list). - CDISR5065E
The conversion from the value type type to an rstring did not succeed. - CDISR5066E
The conversion from the value string to the SPL type of string type did not succeed. - CDISR5067E
The local host name cannot be determined. The error is: system error. - CDISR5068E
Literal: getKind() != expected literal kind. - CDISR5069E
The subscript is not valid because it uses the In operator. - CDISR5070E
The subscription expression clause clause is a predicate rather than an "And" or an "Or" clause. - CDISR5071E
The subscription expression clause clause is an "And" or an "Or" clause. - CDISR5072E
The removal of the last subclause in the clause clause is not valid. - CDISR5073E
It is not valid to remove the following index: clause index. - CDISR5074E
The queried clause clause does not have a subscript. - CDISR5075E
The following getSubclause index is not valid: index. - CDISR5077E
An internal error occurred that was caused by an exception. The error is: exception. - CDISR5078E
An unknown exception occurred during the resource cleanup. The exception was ignored. - CDISR5079E
An exception occurred during the processing of the processing element. The error is: error. - CDISR5080E
An exception occurred during the restoration of the checkpoint. The error is: exception. - CDISR5081E
An exception occurred during a write to the transport client. The error is: exception. - CDISR5082E
The output port index output port of the processing element is not active. The SPL runtime is dropping the tuple or the punctuation. - CDISR5083E
The following regular expression cannot be compiled: regular expression. - CDISR5084E
The following regular expression, which is used for substitution, could not be compiled: regular expression. - CDISR5085E
The following metric was not found: metric. - CDISR5087E
The conversion from source encoding to target encoding is not supported. - CDISR5088E
A multibyte sequence that is not valid was encountered during the conversion from source encoding to target encoding. - CDISR5089E
The NativeByteBuffer cannot convert the pointer to a pointer size-bit pointer. - CDISR5090E
An object of the ValueHandle or ConstValueHandle class cannot be created from the C++ type T=C++ type. - CDISR5091E
The conversion to type target type from a value handle that contains a value of type value type is not valid. - CDISR5092E
A tuple of type target type cannot be assigned from a tuple of type type. - CDISR5093E
A tuple of type target type cannot be swapped with a tuple of type type. - CDISR5094E
The following set cannot be created from the collection: set<element type>. - CDISR5095E
When the operator name operator was saving the checkpoint in the getCheckpoint routine, the operator encountered the following exception: exception. - CDISR5096E
The SPL operator operator failed because the keys of the maps are not identical. - CDISR5097E
The following map cannot be created from the collection: map<key type,value type> - CDISR5098E
The key map index cannot be found. - CDISR5099E
The following list cannot be created from the collection: list<element type> - CDISR5100E
The lower bound lower bound of the slice is greater than the size of the list, which is number of elements. - CDISR5101E
The string value constant that was assigned to an Enum object is not correct. - CDISR5102E
An Enum object of type target type cannot be assigned from an Enum object of type type. - CDISR5103E
An Enum object of type target type cannot be swapped with an Enum object of type type. - CDISR5104E
The following index is not valid: index value. The valid range for the index is [0..object size]. - CDISR5105E
The lower bound of the slice is lower bound, and the lower bound is greater than the size of the blob, which is number of elements. - CDISR5106E
The following bounded map cannot be created from the collection: bmap<key type,value type,map size> - CDISR5107E
The following bounded map cannot be created from the collection: blist<key type,list size> - CDISR5108E
The front routine cannot be called on an empty list, which has no element at index 0. - CDISR5109E
The back routine cannot be called on an empty list. The list has no element at index -1. - CDISR5110E
The following bounded string cannot be created from the collection: bstring<size> - CDISR5111E
The application is trying to resize the external buffer. The current size is size. The buffer requires size bytes. - CDISR5112E
The attempt to resize the external buffer will result in a size that is greater than the maximum allowed size. The current size is size. The buffer requires size bytes, but the maximum allowed growth is size. - CDISR5113E
The NetworkByteBuffer cannot convert a pointer to a pointer size-bit pointer. - CDISR5114E
The pathname directory does not exist. - CDISR5115E
The pathname pathname is not a directory. - CDISR5116E
An internal error occurred at input port ID port id of the processing element. - CDISR5117E
An internal error occurred at output port ID port id of the processing element. - CDISR5118E
An internal error occurred at input port number port number of the processing element. - CDISR5119E
The port number output port index is not part of this processing element. - CDISR5120E
An internal error occurred at operator index: operator index. - CDISR5121E
The multibyte sequence that was detected during the encoding from UTF-8 is not valid. - CDISR5122E
A multibyte sequence that is not valid was detected during the encoding to UTF-8. - CDISR5123E
The operator name operator encountered an exception during the execution of the getCheckpoint routine. Processing element number processing element number is terminating. - CDISR5124E
The operator name operator encountered an exception during the execution of restoreCheckpoint routine. Processing element number processing element number is terminating. - CDISR5125E
The metric metric already exists. - CDISR5126E
A Java exception occurred at location of exception during the JavaOp invocation. - CDISR5127E
Duplicate values were provided for the submission time parameter. The duplicate values are: submission time value and submission time value. - CDISR5128E
Only a list<uint8> can be cast to a blob. - CDISR5129E
An error occurred while the dynamic shared object was loaded for the processing element name processing element from the pathname file. The error is: error. - CDISR5130E
The cast to a complex value from the list value of list value is not valid. - CDISR5131E
The input port at the index index of the operator name operator is not imported by subscription. - CDISR5132E
The input port at index index of the operator name operator is not exported by properties. - CDISR5133E
The following tuple index is out of bounds: index value. The valid range is 0..maximum valid index. - CDISR5134E
The attribute name attribute does not exist in the tuple. - CDISR5135E
The following input port index is outside the valid range: index value. The valid range is [0..maximum valid index plus one). - CDISR5136E
An error occurred while parsing the XML string XML string. The error was: error code. - CDISR5137E
An internal error occurred while the SPL runtime was searching for the stream property name stream property. - CDISR5138E
The nested list in the conversion to the ublas matrix is not valid. - CDISR5139E
The string length of string size is too long to encode on a TCP connection to InfoSphere Streams Version 1. - CDISR5140E
The pipe system call failed. The error is: error code. - CDISR5141E
The fork system call failed. The error is: error code. - CDISR5142E
The copy of the source pathname file to the target pathname file failed. The error is: error. - CDISR5143E
The SO_REUSEADDR option cannot be set on the socket. The error is: error code. - CDISR5144E
The SPL operator operator failed because of a list size mismatch. - CDISR5145E
The JavaOp operator cannot start the Java Virtual Machine. The JNI error codes are: creation result code and location result code. - CDISR5146I
The operator name metric of the metric name operator has a value of metric value at exit. - CDISR5147I
The metric name metric of the processing element has a value of metric value at exit. - CDISR5150I
The signal signal occurred during the application execution. The application is shutting down. - CDISR5151I
The signal signal is trapped for the second time. The application is stopping. - CDISR5153W
The messages for the locale locale cannot be loaded. The default text of the messages will be used. - CDISR5154E
An error occurred during the processing of the file name file. The error is: error code. - CDISR5155E
An error occurred during the processing of tuple tuple index in the file name file. The error is: error code. - CDISR5156E
An error occurred while the SPL runtime processing the XML string XML string. - CDISR5157E
An exception occurred during the execution of the application. The error is: exception explanation. - CDISR5158E
An unknown exception occurred during the execution of the application. - CDISR5159W
The TCPSink operator lost the connection. - CDISR5160E
The system did not rename the file name file to be the file name file. The error is: error. - CDISR5161E
The parameter name parameter name was not found. - CDISR5162E
The value of the parameter is not a ConstValueHandle object. - CDISR5163E
The serialized XML for the attribute name attribute is not the attribute type type. - CDISR5164E
The serialized tuple XML cannot be parsed. The error is: error. - CDISR5165E
An error occurred during a conversion from the value value to the type type. - CDISR5166E
The serialized XML for the attribute name attribute is missing. - CDISR5167E
The serialized XML for the type type is missing. - CDISR5168E
The SPL runtime cannot parse the serialized tuple XML. An unknown exception occurred. - CDISR5169E
exception description:line number:column number: message - CDISR5170E
The XML is not valid. The error is: error. - CDISR5171E
The following XML schema cannot be loaded: URI. - CDISR5172E
The value of the operand of the modulus or division operator is zero, which is not valid. - CDISR5173E
The subscription expression clause clause does not contain a modulo divisor. - CDISR5174E
The filename value pattern of the pattern Filesink file parameter is not formed correctly. - CDISR5175E
The Filesink file parameter generated an empty string. - CDISR5176E
An uninitialized XML value cannot be read. - CDISR5179E
An error occurred when a file was moved. The error is: error. - CDISR5180E
The write to the pathname file did not succeed. - CDISR5181E
The following binary format type character is not recognized: hexadecimal value. - CDISR5182E
The value of the step parameter to the range function is zero, which is not valid. - CDISR5183E
An error occurred in the following xquery expression: xquery query. The error is: error. - CDISR5184E
An error occurred when the following xquery was executed: xquery query. The error is: error - CDISR5185E
An unknown exception occurred during the xquery processing. - CDISR5186E
The attribute name attribute was not found in the tuple. - CDISR5187E
The attribute type must be an integer type, a floating-point type, an rstring, or a boolean. - CDISR5188E
The attribute type of a list must be a list of an integer type, a floating-point type, rstring, or boolean. - CDISR5189E
The left and right expressions have different types. - CDISR5190E
The attribute must have an integral type to use any arithmetic operation. - CDISR5201E
A message identifier must be specified. - CDISR5202E
The path must be specified for the user messages. - CDISR5203E
The bundle name for the user messages must be specified. - CDISR5204E
The message prefix prefix does not match the message prefix prefix of the specified bundle. - CDISR5208E
The following substitution argument is not valid: substitution argument. - CDISR5209E
The toolkit name must be specified for the user messages. - CDISR5210E
The type of the substitution attribute with the attribute name name is not a supported type. The type must be one of the following types: rstring, integral, or binary floating point. - CDISR5211E
The resource bundle name resource bundle cannot be found. The default messages will be used. - CDISR5213E
TCPClient or TCPServer: The wire format confirmation failed. The write operation failed at step step number. - CDISR5214E
TCPClient or TCPServer: The wire format confirmation failed. The magic number is incorrect: step number. - CDISR5215E
TCPClient or TCPServer: The wire format confirmation failed. The read operation timed out at step step number. - CDISR5216E
TCPServer: The wire format confirmation failed. The response at the following step is unknown: step number. - CDISR5217E
TCPClient or TCPServer: The wire format confirmation failed. The protocol cannot allocate a buffer of size buffer size at step step number. - CDISR5218E
TCPClient or TCPServer: The wire format confirmation failed. The error is: error - CDISR5219I
TCPClient or TCPServer: The wire format confirmation succeeded: message. - CDISR5220E
TCPClient or TCPServer: The wire format confirmation failed. The XML of the wire format is not valid. The error is: error. - CDISR5221W
A format mismatch exists. The mismatched formats are: format and format. - CDISR5222W
A data compression type mismatch exists. The mismatched compression types are: compression type and compression type. - CDISR5223W
An encoding mismatch exists. The mismatched encoding types are: encoding type and encoding type. - CDISR5224W
The tuple schemas are not both present or are not both missing. - CDISR5225W
The tuple schemas are not identical. - CDISR5226W
A mismatch of the includesPunctuations parameter settings exists. The mismatched parameter settings are: boolean value and boolean value. - CDISR5227W
A mismatch of the hasDelay parameter settings exists. The mismatched parameter settings are: boolean value and boolean value. - CDISR5233E
Processing element number processing element number is unable to resolve the hostname TCP hostname or to resolve port number port number from the operator name operator. - CDISR5234E
Processing element number processing element number is unable to resolve the hostname UDP hostname or to resolve port number port number from the operator name operator. - CDISR5235W
A processing element ignored signal number signal number. - CDISR5236E
The parameter name argument to the keepAlive parameter is negative. - CDISR5237E
The TCP listen operation failed. The error is: error code. - CDISR5238E
The TCP poll operation failed. The error is: error code. - CDISR5239E
A control plane operation failed. The error is: error code. - CDISR5240E
Invalid combination of arguments in control method invocation: passing count arguments, while the argument types vector is NULL. - CDISR5241E
Invalid combination of arguments in control method invocation: passing count arguments and count argument types. - CDISR5242E
Unsupported type type in control method invocation. - CDISR5243E
An operator was attempting to access the data directory and no data directory has been specified. - CDISR5244E
The SPL Runtime got error when manipulating checkpoint data for operator name operator: error, received exception: exception. - CDISR5245E
The read of the attribute name attribute failed for the following tuple number: tuple number. - CDISR5246E
Environment variable name is undefined. - CDISR5247E
The system cannot find a Java installation. - CDISR5248E
The system failed to start the Java Virtual Machine. Function JNI_CreateJavaVM returned error_code_0 and function JNI_GetCreatedJavaVMs returned error_code_1. - CDISR5249E
The system failed to load the Java Virtual Machine library because of error in: message. dlerror() returned: dlerror_message. - CDISR5250E
The system failed to create a PE model. - CDISR5251E
The system failed to parse the PE model. - CDISR5252E
The subscript in a filter expression must be positive. - CDISR5253E
The literal value literal value in a filter expression is outside the allowed range of lower limit - upper limit. - CDISR5254E
The literal value literal value in a filter expression is cannot be cast to an integer. - CDISR5255E
The literal value literal value in a filter expression is cannot be cast to floating point type floating point type because its absolute value is below the lowest value for its target type, minimum value. - CDISR5256E
The literal value literal value in a filter expression cannot be cast to type type. - CDISR5257E
The filter expression filter expression cannot be parsed. - CDISR5258E
The filter expression filter expression cannot be parsed. The parse failed around parse failure location. - CDISR5259E
Invalid operation operation on an attribute of type type. - CDISR5260E
Attribute operation is not boolean. - CDISR5261E
The input could not be decompressed. - CDISR5262E
The consistent region drain operation could not be completed due to shutdown. - CDISR5263E
The input port at the index index of the operator name operator is not imported. - CDISR5271E
The operation operation is not a supported operation in an import filter. - CDISR5272E
The window at the port index index of the operator name operator does not accept a policy of type policy type. - CDISR5273E
An attempt was made to convert an optional of one type to an optional of another type: optional<type>. - CDISR5274E
The operator name operator does not have a window. - CDISR5275E
The operator name operator does not have an event time window. - CDISR5276E
The getEventTime function was called on a tuple without an event-time attribute. - CDISR5277E
A watermark was received from the unexpected source, the port index port of the operator name operator. - CDISR5278E
The operation operation name is not supported. - CDISR5279E
A watermark input watermark was received which was earlier than the operator's current watermark current watermark. The watermark was received from operator operator name, port port index. - CDISR5280E
A value handle representing an optional type was accessed when null. - CDISR5281W
Operator cannot generate watermarks. It has 0 input ports and EventTimeContext watermark mode watermark mode. - CDISR5282W
Watermark lag ignored for operator annotated with EventTimeContext watermark mode watermark mode. - CDISR5283E
Invalid value for SSL / TLS parameter parameter name: parameter value - CDISR5284E
An internal error occurred with SSL / TLS: error details - CDISR5285E
Unable to allocate SSL / TLS structure. - CDISR5286E
Cannot load SSL / TLS certificates from file: file path. - CDISR5287E
Cannot load SSL / TLS private key from file: file path. - CDISR5288E
Cannot validate SSL / TLS private key from file: file path. - CDISR5289E
Cannot validate peer SSL / TLS certificate. - CDISR5290E
Cannot get SSL / TLS application configuration named: application configuration name. - CDISR5500E
Input port port does not allow any window configuration: port set - CDISR5501E
Port port window type is window type. The expected type is window type. - CDISR5502E
Port port window is not partitioned. - CDISR5503E
Port port window eviction count policy value value is negative. - CDISR5504E
Port port window eviction time policy value value is negative. - CDISR5505E
Input port schema schema does not match output port schema schema. - CDISR5506E
Port port window eviction delta policy attribute attribute does not exist. - CDISR5507E
Port port window eviction delta policy for attribute attribute value class class is not the required type type for source. - CDISR5508E
Port port window trigger time policy value value is negative. - CDISR5509E
Port port window partition eviction age policy value value is negative. - CDISR5510E
Port port window trigger count policy value value is negative. - CDISR5511E
Port port is not windowed. - CDISR5512E
Port port window partition eviction count policy value value is negative. - CDISR5513E
Port port window partition tuple eviction count policy value value is negative. - CDISR5514E
Port port no window eviction policy specified. - CDISR5515E
Port port no sliding window trigger policy specified. - CDISR5516E
Input port port for operator operator requires a windowed port: port set - CDISR5517E
Operator operator does not allow input ports. - CDISR5518E
Input port cannot be added as operator operator has a maximum of number input ports. - CDISR5519E
Port index out of range: index - CDISR5520E
Operator index does not allow output ports. - CDISR5521E
Output port cannot be added as operator operator has a maximum of number output ports. - CDISR5522E
Operator operator has a minimum of number input ports but only number are configured. - CDISR5523E
Operator operator has a minimum of number input ports and maximum of number but number are configured. - CDISR5524E
Operator operator has a minimum of number output ports but only number are configured. - CDISR5525E
Port port is connected in the graph. - CDISR5526E
Mismatched issuer and subject for JCP self-signed certificate. - CDISR5528E
Custom metric metric name already exists. - CDISR5529E
Custom metric name cannot be empty. - CDISR5530E
Custom metric metric name does not exist. - CDISR5531I
metric name for input port: input port - CDISR5532I
metric name for output port: output port - CDISR5533E
Null attribute value passed for index index - CDISR5534E
Output port port export type export type is not equal to export type. - CDISR5535E
Port port is not connected to a PE port. - CDISR5536E
Attribute index 'index' out of range - CDISR5537E
Attribute name 'name' does not exist in the Tuple's schema. - CDISR5542E
Mandatory parameter parameter is optional in the operator model: annotation annotation on setter - CDISR5543E
Required type type not specified for parameter parameter in the operator model: annotation annotation on method - CDISR5545E
Cardinality for parameter parameter in the operator model is required to be 1 to be compatible with annotation annotation on method - CDISR5546E
The metric kind metric kind for custom metric metric is required to be metric kind to match @CustomMetric. - CDISR5547E
@ContextCheck failures for Java operator class class - CDISR5548E
Tuple type mismatch - port's StreamSchema: schema - submitted tuple's StreamSchema: schema - CDISR5549E
Class class not supported for @Parameter at method: method - CDISR5550E
property requires single value - CDISR5551E
property requires a value in the form <input port name>.<attribute name>. Invalid value specified - value - CDISR5552E
Cannot remove all attributes from a schema: schema - CDISR5553E
Java primitive implementation class class does not implement interface - CDISR5554E
Timestamp is unavailable during checkpointing - CDISR5555E
An input stream can only be retrieved during a restore. - CDISR5556E
An output stream can only be retrieved during checkpointing - CDISR5557E
Operator must be at the start of a consistent region - CDISR5559E
Index index is out of range for enum - CDISR5560E
Identifier identifier is not valid for enum - CDISR5561E
spl enum type: Index for spl enum member does not equal ordinal for java enum type.java enum member - CDISR5562E
Conversion between SPL type spl type (MetaType.meta type) and Java type java type is not supported. - CDISR5563E
Language type: spl type not supported by JavaOp - CDISR5564E
Internal Error: Window attribute for delta policy not found: attribute - CDISR5565E
Unsupported attribute type for window delta policy: attribute - CDISR5566E
Environment variable STREAMS_INSTALL not set - CDISR5567E
Operator already shutdown - CDISR5568E
Notification source name has already been added. - CDISR5569E
Java Platform API Specification version not at Java 7 or higher. - CDISR5570E
Cannot determine Java Platform API Specification version - CDISR5599E
Temporary directory directory was not fully removed. - CDISR5600E
The execution location directory does not exist. - CDISR5601E
The execution location directory is not a directory. - CDISR5602E
The execution location directory does not have the correct permissions. - CDISR5607E
A watermark was received from the unexpected source operator operatorId, port portIndex. - CDISR5608E
A watermark input watermark was received which was earlier than the current watermark current watermark. The watermark was received from operator operatorId, port portIndex. - CDISR5609W
Operator cannot generate watermarks. It has 0 input ports and EventTimeContext watermark mode watermark mode. - CDISR5610W
Watermark lag ignored for operator annotated with EventTimeContext watermark mode watermark mode. - CDISR5611E
Set state to MAXIMUM_RESET_ATTEMPTS_REACHED for region region. - CDISR5612I
Consistent region region needs to be reset because its drain timed out. - CDISR5613I
The following PEs completed draining: list of PEs. The following PEs did not complete draining: list of PEs. - CDISR5614I
Consistent region region needs to be reset because its reset timed out. - CDISR5615I
The following PEs completed resetting: list of PEs. The following PEs did not complete resetting: list of PEs. - CDISR5616I
Consistent region index needs to be reset because a reset was requested externally. - CDISR5617I
Consistent region index needs to be reset because the start operator started after a drain or reset was attempted. - CDISR5618I
Consistent region index needs to be reset because the the first time region became healthy happened after a drain or reset was needed. - CDISR5619I
Consistent region index needs to be reset because the region health changed from old health to new health. - CDISR6000E
An unexpected error occurred in the following resource manager: rm_name. - CDISR6001E
An unexpected error occurred in the following resource manager: rm_name. Error is: error. - CDISR6002E
The rm_name resource manager is not available. - CDISR6003E
The rm_name resource manager is already running on host=hostname port=port. - CDISR6004E
The rm_name resource manager does not support the following format for the tag_name tag: definition_format. - CDISR6005E
The rm_name resource manager does not support the following tag_name tag attribute: attribute_name. - CDISR6006E
The rm_name resource manager does not support the 'attribute_value' value for the following 'tag_name' tag attribute: attribute_name. - CDISR6007E
The rm_name resource manager requires a numeric value for the following 'tag_name' tag attribute: attribute_name. The 'attribute_value' value is incorrect. - CDISR6008E
The rm_name resource manager requires a string value for the following 'tag_name' tag attribute: attribute_name. The 'attribute_value' value is incorrect. - CDISR6009E
The 'tag_name' tag is not associated with the request. - CDISR6010E
The 'tag_name' tag definition was not defined using the 'format_name' format. - CDISR6011E
The rm_name resource manager could not complete the request. The error is: error_msg. - CDISR6012E
The rm_name resource persistence manager is not connected. - CDISR6013E
The option_name option was not supplied. This command line option is required. - CDISR6014E
The user_name user can not access the following configuration file: file_name. - CDISR6015E
There are no rm_name resource managers registered for all domains in the zookeeper ensemble. - CDISR6016E
There are no rm_name resource managers registered for the following domain: domain_name. - CDISR6017E
There are no rm_name resource managers registered in the zookeeper ensemble. - CDISR6018I
Stopping the rm_name resource manager on host=host_name port=port pid=pid. - CDISR6019I
The rm_name resource manager stopped successfully on host=host_name port=port pid=pid. - CDISR6020E
The rm_name resource manager is actively managing resources. Stop the domains that are currently using resources or use the --force option. - CDISR6021E
The property_name property must be specified in the following configuration file: file_name. - CDISR6022E
The option1 option can not be specified at the same time as the option2 option. - CDISR6023E
The rm_name resource manager is not available for the following domain: domain_name. - CDISR6024E
The property_value value for the property_name property is not supported. The property is specified in the following configuration file: file_name. - CDISR6025I
The rm_name resource manager has been submitted as a background process. Use the 'command' command to view process information. - CDISR6026E
The tag_attribute tag attribute is incompatible for the following tag definitions: tag_list. - CDISR6027E
The master resource could not be allocated for the following domain: domain_name. - CDISR6028E
An unexpected error occurred stopping the following resource manager: rm_name. Error is: error. - CDISR6101E
The following consumer does not exist in IBM Spectrum Symphony: consumer_name. - CDISR6102E
The following resource group does not exist in IBM Spectrum Symphony: group_name. - CDISR6103E
The 'consumer_name' consumer is not authorized to the following resource group in IBM Spectrum Symphony: resource_group_name. - CDISR6104E
The following tag definitions do not have any resource groups in common: tag_list. - CDISR6200E
An error occurred allocating the master resource. - CDISR6201E
The following container identifier could not be located: container_id. - CDISR6202E
A resource request could not be found for the following container: container_id. - CDISR6203E
The following property must be specified in the configuration file: property_name. - CDISR6204E
Can not locate YARN_APPLICATION_CLASSPATH. Ensure a value has been set in the Yarn configuration.
Parent topic: IBM Streams messages