LIBI - LTAP

LIBI0801E
INVALID LIBFUN PARAMETER @LIBFUN(plist)
LIBI0802E
REQUIRED PARAMETER IS MISSING FROM @LIBFUN(plist)
LIBI0810E
INVALID LIBRARY INTERFACE INSTRUCTION
LIBI0815E
DUPLICATE INTERNAL FUNCTION NAME intfunction
LIBI0820E
DUPLICATE EXTERNAL FUNCTION NAME extfunction
LIBI0821E
INVALID EXTERNAL FUNCTION NAME extfunction
LIBI0822E
INVALID INTERNAL FUNCTION NAME intfunction
LIBI0823E
FUNCTION ORDINAL NUMBER fordinal IS ALREADY ASSIGNED TO extfunction
LIBI0824E
INVALID FUNCTION ORDINAL NUMBER fordinal
LIBI1201T
SYSXV DATASET CANNOT BE OPENED FOR OUTPUT
LIBI1202T
SYSCLS DATASET CANNOT BE OPENED FOR OUTPUT
LIBI1212T
WRITE ERROR ON SYSXV
LIBI1213T
WRITE ERROR ON SYSCLS
LIBI1215T
FCLOSE ERROR ON SYSXV
LIBI1216T
FCLOSE ERROR ON SYSCLS
LIBI1250T
NO LIBRARY INSTRUCTION ID IS SPECIFIED
LIBI1251T
MORE THAN ONE VALID LIBRARY ID INSTRUCTION IS SPECIFIED
LIBI1252T
INVALID LIBRARY ORDINAL NUMBER ordinal
LIBI1253T
REQUIRED LIBRARY ID PARAMETER IS MISSING
LIBI1254T
INVALID LIBRARY NAME name
LIBI1260T
NO FUNCTIONS ARE SPECIFIED
LIN002
TPF MUST BE EITHER A TRIBUTARY OR A CONTROL STATION FOR MULTIPOINT
LIN003
TPF MUST CONTAIN BSC TO SPECIFY BSC OPTIONS—IGNORED
LIN006
# of BSC DROPS DEFINED BY lines LESS THAN # of BSC LINES – DEFAULT SET
LIN007
AT LEAST 1 PARAMETER REQUIRED FOR BSCOP
LIN008
INVALID PARAMETER IN BSCOP — parameter PARAMETER IGNORED
LIN009
DUPLICATE PARAMETER IN BSCOP — parameter PARAMETER IGNORED
LIN010
BSC MUST BE MULTIPOINT FOR TPF TO BE A CONTROL STATION
LOAD0001I
File: filename, Line: linenumber PROGCLEAR=YES was specified in the loader input file. All programs that were loaded previously to the image will be cleared.
LOAD0002I
File: filename, Line: linenumber ELDRCLEAR=NO was set. Any loadsets that were loaded previously to the image will remain unchanged.
LOAD0003I
File: filename, Line: linenumber No processor was specified for processor-unique keypoint kptname. The default processor will be assumed for this keypoint.
LOAD0004I
File: filename, Line: linenumber parm parameter is not valid for the tpfofflineloader loader.
LOAD0005I
File: filename, Line: linenumber stmt control statement is not valid for the tpfofflineloader loader.
LOAD0006I
File: filename, Line: linenumber Lines under stmt control statement were ignored.
LOAD0007I
The default of ELDRCLEAR=NO was accepted. Any loadsets that were loaded previously to the image will remain unchanged.
LOAD0008I
File: filename, Line: linenumber PROGCLEAR=YES was implied in the loader input file. All programs that were loaded previously to the image will be cleared.
LOAD0009I
The MOVE statement is not necessary with PROGCLEAR=YES.
LOAD0010I
Parsing step ended with return code rc.
LOAD0011I
offldr version:version information
LOAD0012I
File: filename, Line: linenumber FCTBCLEAR=YES was set. The alternate FACE table will be cleared online.
LOAD0020I
Load step ended with return code rc.
LOAD1201T
Could not open the filename loader input file.
LOAD1202T
Loader input file is empty.
LOAD1203T
Error while opening temporary load medium.
LOAD1204T
Error while writing to temporary load medium.
LOAD1205T
Error while reading temporary load medium.
LOAD1206T
Error while opening load output file.
LOAD1207T
Error while writing to load output file.
LOAD1209T
Unable to allocate storage for struct. Job canceled.
LOAD1213T
Error while writing to report file.
LOAD1214T
Error while opening report file.
LOAD1220T
Multiple instances of the parm parameter exist.
LOAD1221T
Load type not specified.
LOAD1222T
parm is not a valid parameter for the offline loader.
LOAD1223T
There has been a conflict in the files specified.
LOAD1224T
Directory specified for –w could not be accessed.
LOAD1225T
The first parameter must be a valid load type.
LOAD1226T
-expdt and -retpd command line parameters are mutually exclusive.
LOAD1227T
-volser parameter is not valid.
LOAD1228T
-volser parameter must be specified if output device is specified as /dev/...
LOAD1229T
-expdt parameter is not valid.
LOAD1230T
-retpd parameter is not valid.
LOAD1231T
volser found on tape label does not match specified value of volser.
LOAD1232T
tape found on device is not labeled.
LOAD1233T
tape found on device is not expired.
LOAD1234T
tape found on device is write protected.
LOAD1235I
tape on device device has volser.
LOAD1250T
Load step not performed because of errors in the parsing step.
LOAD1251T
Parsing step not performed because of errors while processing parameters.
LOAD1255T
A terminating condition occurred. Load not completed.
LOAD1260T
The loader type loader is not available on Linux®.
LOAD1270T
Output device specified for GENFIL has been exceeded.
LOAD1271T
An incorrect data length was specified when writing to the loader general file.
LOAD1272T
An error occurred while determining the device type of the loader general file.
LOAD1273T
The output device specified is not valid for the loader general file.
LOAD1274T
The output device specified for GENFIL parameter could not be opened.
LOAD1275T
The output device specified for GENFI2 parameter could not be opened.
LOAD1276T
component occupies more records than are allotted in CTKX.
LOAD1279T
IPLA occupies more than num_recs records.
LOAD1298T
Keypoint table is not in sync with CTKX. Keypoint kpt_char is identified as processor type in CTKX.
LOAD1299T
Keypoint table is not in sync with list of keypoint equates.
LOAD4000W
File: filename, Line: linenumber Control statement spelled incorrectly. stmt control statement was assumed.
LOAD4001W
component1 was superseded by component2. component2 will be loaded to the z/TPF system.
LOAD4002W
pat1 was superseded by pat2. pat2 will be used for verification.
LOAD4003W
File: filename, Line: linenumber Parameter spelled incorrectly. The loader interprets this parameter to be parm.
LOAD4004W
component1 was superseded by an online patch. The online patch will be loaded to the z/TPF system.
LOAD4005W
File: filename, Line: linenumber A block comment was not closed before the end of the loader input file was reached.
LOAD4007W
Cannot open trace file.
LOAD4008W
File: filename, Line: linenumber CTKX is being loaded. Loading CTKX implies a FCTBCLEAR=YES. The alternate FACE table will be cleared online.
LOAD4009W
File: filename, Line: linenumber Unrecognized text ignored: text_string.
LOAD4012W
File: filename, Line: linenumber No loader input file was specified for the @INCLUDE control statement. @INCLUDE control statement was ignored.
LOAD4013W
File: filename, Line: linenumber Processor specified for component was ignored. Processors can be specified only for processor-unique keypoints.
LOAD4016W
File: filename, Line: linenumber Object files can only be specified when patching a program in the @APPLICATION control statement.
LOAD4017W
BSO bsoname contains number relocation entries.
LOAD4018W
component contains a relocation at offset offset that is not supported for imported data.
LOAD4070W
program is not present in the specified IPAT. The program will be loaded anyway.
LOAD4080W
progname did not have __TPF_TOD time stamp. Using current time stamp.
LOAD4081W
Unsupported value for CGCC_COW_CRPA symbol. progname will reside in standard CRPA.
LOAD4082W
Unsupported value for CGCC_COW_CRPA symbol. progname will reside in copy-on-write CRPA.
LOAD4099W
File: filename, Line: linenumber User exit warning warning num encountered for program prog name. Program loaded anyway.
LOAD4100W
targetfile from source1 was superceded by file from source2
LOAD4101W
file IS NOT A LOCAL FILE. CANNOT DETERMINE SOURCE GROUP NAME. GROUP ID WILL BE SET TO DEFAULT.
LOAD4102W
file IS NOT A LOCAL FILE. CANNOT DETERMINE SOURCE OWNER NAME. OWNER ID WILL BE SET TO DEFAULT.
LOAD4103W
file IS NOT A LOCAL FILE. CANNOT DETERMINE SOURCE OWNER OR GROUP NAME. OWNER AND GROUP IDs WILL BE SET TO DEFAULT.
LOAD4104W
File: filename, Line: linenumber The parm parameter is no longer supported and is ignored.
LOAD8001E
File: filename, Line: linenumber Version specified for component is not valid.
LOAD8002E
File: filename, Line: linenumber Value specified for the parm parameter is not valid.
LOAD8003E
File: filename, Line: linenumber &pathname is not a valid search path name.
LOAD8004E
File: filename, Line: linenumber parm parameter was previously defined and cannot be redefined.
LOAD8005E
File: filename, Line: linenumber Directory dir could not be opened.
LOAD8006E
File: filename, Line: linenumber Extension specified for progname is not valid.
LOAD8008E
File: filename, Line: linenumber Could not open the filename loader input file specified for the @INCLUDE control statement.
LOAD8009E
File: filename, Line: linenumber Search path &pathname is not defined.
LOAD8010E
File: filename, Line: linenumber Relative path dir cannot be specified because the CWD parameter was not defined.
LOAD8011E
File: filename, Line: linenumber parm is not valid for the type loader.
LOAD8012E
File: filename, Line: linenumber An absolute path must be specified for the CWD parameter.
LOAD8013E
File: filename, Line: linenumber No value was specified for the parm parameter.
LOAD8014E
File: filename, Line: linenumber No parameter was specified for this definition.
LOAD8015E
File: filename, Line: linenumber No valid directories were specified for search path &pathname.
LOAD8016E
File: filename, Line: linenumber parm is not a valid parameter for the @DEFINE control statement.
LOAD8017E
File: filename, Line: linenumber Lines under stmt control statement were ignored.
LOAD8018E
File: filename, Line: linenumber No location was specified for component.
LOAD8019E
File: filename, Line: linenumber Processor specified for keypoint kptname is not valid.
LOAD8020E
File: filename, Line: linenumber Patch information specified is not complete.
LOAD8021E
File: filename, Line: linenumber Cannot patch component because it was not loaded previously in the current stmt control statement.
LOAD8022E
File: filename, Line: linenumber Cannot patch component in the stmt control statement.
LOAD8023E
File: filename, Line: linenumber New data specified to patch component is not valid.
LOAD8024E
File: filename, Line: linenumber No name was specified for patch.
LOAD8025E
File: filename, Line: linenumber Relative starting address specified to patch component is not valid.
LOAD8026E
A patch was not applied to component. Specified patch information extends beyond the end of the component.
LOAD8027E
File: filename, Line: linenumber path is not a valid location.
LOAD8028E
File: filename, Line: linenumber Path contains characters that are not valid.
LOAD8029E
File: filename, Line: linenumber stmt control statement is not valid for the tpfofflineloader loader
LOAD8030E
File: filename, Line: linenumber @INCLUDE control statment creates a circular include condition by including the input_file loader input file.
LOAD8031E
component was not loaded. A program length of zero was indicated.
LOAD8032E
component was not loaded. Exceeds maximum size allowed.
LOAD8033E
component was not loaded. Unexpected data encountered.
LOAD8034E
component was not loaded because it did not contain required END statement.
LOAD8035E
component was not loaded. ELF program did not contain required ELF_section section.
LOAD8037E
component was not loaded. Error occurred while reading file.
LOAD8038E
component was not loaded. Can load only to xxxx.
LOAD8039E
component was not loaded. Could not be found.
LOAD8040E
progname was not loaded. Could not obtain information.
LOAD8041E
component was not loaded. Offset and address do not match for section section.
LOAD8043E
component was not loaded. File permissions do not allow access.
LOAD8044E
keypt was not loaded. Record ID was not CK.
LOAD8045E
progname was not loaded. Function functionname exists in both progname2 and progname.
LOAD8046E
component was not loaded. File is corrupt.
LOAD8047E
progname was not loaded. Could not locate in EPLT.
LOAD8048E
component was not loaded. Could not find a loadable entry in the program header table.
LOAD8049E
component contains a relocation at offset offset that is not supported.
LOAD8050E
File: filename, Line: linenumber The MOVE statement is not valid for the ALDR loader.
LOAD8051E
File: filename, Line: linenumber Online keypoint patches are not valid for @GFKEYPOINT.
LOAD8052E
File: filename, Line: linenumber string is not a valid component specification for the cntrlstmt control statement.
LOAD8054E
File: filename, Line: linenumber line is not a valid definition for the @DEFINE control statement.
LOAD8055E
File: filename, Line: linenumber This line must be preceded by a valid control statement.
LOAD8056E
File: filename, Line: linenumber name may not be loaded with OLDR.
LOAD8057E
A patch was not applied to progname. The .tpfzdmap section could not be found.
LOAD8058E
File: filename, Line: linenumber A program comment was begun but did not end.
LOAD8059E
File: filename, Line: linenumber stmt is not a valid control statement.
LOAD8060E
Loadset loadset name is empty.
LOAD8061E
File: filename, Line: linenumber Loadset loadset name already exists.
LOAD8062E
File: filename, Line: linenumber loadset name is not a valid loadset name.
LOAD8063E
File: filename, Line: linenumber No name was specified for this loadset.
LOAD8065E
pat cannot be used for verification. A program length of zero was indicated.
LOAD8066E
pat cannot be used for verification. Exceeds maximum size allowed.
LOAD8067E
pat cannot be used for verification. ELF program did not contain required ELF_section section.
LOAD8068E
pat cannot be used for verification. Module did not contain required END statement.
LOAD8069E
pat cannot be used for verification. Unexpected data encountered.
LOAD8070E
progname is not present in the specified IPAT and will not be loaded.
LOAD8071E
OVERLAY_IPAT has been set, but no IPAT is being loaded.
LOAD8072E
File: filename, Line: linenumber There is a conflict between the parm1 and parm2 parameters.
LOAD8073E
A patch was not applied to progname. This program is a CSO. An object file must be specified.
LOAD8074E
A patch was not applied to progname. Specified validation data extends beyond the end of the component.
LOAD8075E
pat cannot be used for verification. File is corrupt.
LOAD8076E
entry point was not moved within the EPLT. Entry point did not appear in any loaded objects.
LOAD8077E
File: filename, Line linenumber The MOVE statement is only valid within the ctrl stmt control statement.
LOAD8078E
File: filename, Line linenumber The patch information specified was not recognized.
LOAD8079E
IPLA occupies more than num_recs records.
LOAD8080E
File: filename, Line linenumber. Valdata specification is not in the required format.
LOAD8081E
File: filename, Line linenumber. Valdata cannot be used for an online keypoint patch.
LOAD8082E
A patch was not applied to component. Valdata mismatch.
LOAD8083E
A patch was not applied to progname. The specified object file name objfile was not found.
LOAD8084E
A patch was not applied to progname. Specified validation data extends beyond the end of the component.
LOAD8085E
File: filename, Line: linenumber Patches are not valid within the @VERIFY control statement.
LOAD8086E
The param parameter requires a subsequent value to be specified.
LOAD8087E
progname was not loaded. The format is not supported.
LOAD8088E
pat cannot be used for verification. The format is not supported.
LOAD8090E
comp must be loaded for an ALDR load to ssid.
LOAD8094E
File: filename, Line: linenumber parm parameter was previously established with a command line argument and cannot be redefined.
LOAD8095E
prog name was not loaded. The loader could not allocate space to create an entry in the EPLT.
LOAD8096E
prog name was not loaded. The loader could not allocate space for all the library vectors in this program.
LOAD8097E
Error while adding ACPL to the EPLT.
LOAD8099E
File: filename, Line: linenumber User exit error error num encountered for program prog name. Program cannot be loaded.
LOAD8104E
File: filename, Line: linenumber parm parameter cannot be altered for the ALDR loader.
LOAD8105E
File: filename, Line: linenumber FCTBCLEAR=NO cannot be set when loading CTKX.
LOAD8139E
pat cannot be used for verification. Could not be found.
LOAD8140E
pat cannot be used for verification. Could not obtain information.
LOAD8143E
pat cannot be used for verification. File permissions do not allow access.
LOAD8144E
output tape volume is full
LOAD8145E
File: filename, Line: linenumber @FILE MUST BE PRECEDED BY @LOADSET
LOAD8146E
File: filename, Line: linenumber UNRECOGNIZED PARAMETER parm
LOAD8147E
File: filename, Line: linenumber DUPLICATE PARAMETER -parm ENCOUNTERED
LOAD8148E
File: filename, Line: linenumber MODE PARAMETER -modeparm NOT OCTAL
LOAD8149E
File: filename, Line: linenumber THE parm1 AND parm2 PARAMETERS ARE MUTUALLY EXCLUSIVE
LOAD8150E
File: filename, Line: linenumber TYPE PARAMETER ARGUMENT arg NOT VALID
LOAD8151E
File: filename, Line: linenumber A DEFINED SEARCH PATH CANNOT BE SPECIFIED ON THIS STATEMENT
LOAD8152E
file WAS NOT LOADED. FILE PERMISSIONS DO NOT ALLOW ACCESS.
LOAD8153E
file WAS NOT LOADED. COULD NOT BE FOUND.
LOAD8154E
File: filename, Line: linenumber Numeric parameter parm exceeds maximum value of value
LOAD8155E
File: filename, Line: linenumber String parameter parm exceeds maximum length of len
LOAD8156E
File: filename, Line: linenumber Comment exceeds max characters.
LOAD8157E
File: filename, Line: linenumber Extraneous data encountered after close of comment.
LOG001
NO LOG TAPES SPECIFIED
LOG002
TAPE MODULE NUMBERS OVERLAP
LOG003
name, parameter PARAMETER INVALID DEVICE TYPE
LOG004
OPERAND operand ENDING MOD LESS THAN STARTING MOD
LTAP0002T
srcfile:lineNo open() function failed with reason code rc, errorString
LTAP0003T
srcfile:lineNo ioctl(rewind) function failed with reason code rc, errorString
LTAP0004T
srcfile:lineNo iconv_open() function failed with reason code rc, errorString
LTAP0005T
srcfile:lineNo iconv() function failed with reason code rc, errorString
LTAP0018T
srcfile:lineNo write() function failed with reason code rc,errorString
LTAP0019T
srcfile:lineNo ioctl (writeTapeMark) function failed with reason code rc, errorString
LTAP0100T
-f command line option was not specified
LTAP0101T
--volser command line option was not specified
LTAP0102T
the --volser value must be exactly 6 characters
LTAP0103T
device name must be of the format /dev/...
LTAP0104A
Confirm you want to label tape on device with volser volser by entering 'Y', any other input will cancel label process
LTAP0105I
tape on device device has been labeled volser
LTAP0106T
--volser value must be alphanumeric only
LTAP0107T
tape on device is write protected
LTAP0108I
labeltape version:version information

Parent topic: Offline messages