To set up the work environment for an RTE, you specify
what type of RTE is being configured, set RTE-specific values, and
select the products to be configured in the environment. Then you
submit the KCIJPCFG job, which uses the values you provide to allocate
the work libraries, update the interim libraries, and create the configuration
profiles for the RTE. You can select a model RTE to use to set up
the new RTE, or configure it from scratch.
Procedure
Select Set up PARMGEN work environment for an
RTE from the Workflow - Primary Options Menu.
The first Set up PARMGEN work environment for an RTE panel
is displayed.
KCIPQPG1 SET UP/REFRESH PARMGEN WORK ENVIRONMENT FOR AN RTE (1 OF 3) --------
Command ===>
Quick Configuration Mode
More: +
Specify the RTE model profile to use:
==> ______________________________________________________
- To create a new RTE based on a predefined IBM model, type a ? in
the field and press Enter, then select the appropriate template.
- To create a new RTE that is a clone of an existing PARMGEN RTE,
specify the WCONFIG profile library and RTE member name to clone;
for example: (&hlq.&rte.WCONFIG(&clone_from))
- To create a new RTE that is a clone of an ICAT-created RTE,
specify the ICAT RTE Batch member location and RTE member;
for example: (&hlq.ICAT.INSTJOBS(SYSA))
- To create a new RTE from scratch, leave this field blank.
- To reconfigure or upgrade this existing PARMGEN RTE, specify its values;
for example: (TDITNT.IDTST.SYSA.WCONFIG(SYSA))
Customize jobcard data:
==> //TDITNT JOB (ACCT),'%SYSMEMBER% - NAME',CLASS=A,______________________
==> // MSGCLASS=X,MSGLEVEL=(1,1),NOTIFY=&SYSUID.,REGION=0M__________________
==> //** 0 0 RTE_NAME=%RTE_NAME% SYSMEMBER=%SYSMEMBER%_____________________
==> //** \_~_/ SYSJOBNAME=%SYSJOBNAME% JOBPARM SYSAFF=%SYSNAME%______________
Specify the Install Job Generator (JOBGEN) output library if you want
PARMGEN to reuse CALLLIBS parameters from the JOBGEN repository:
==> ____________________________________________
(Type ? for last referenced JOBGEN library discovered, if any.)
To use the IBM-provided model RTE, type a question mark
(?) in the field, then select the $MDLHF template. To create an RTE
from scratch, leave the field blank. As appropriate, specify the Install
Job Generator output library and job card data.
Jobcard data
If
a customized job card is already available, it is retrieved from the
ISPF user profile pool. If it is not available and if you did not
specify a JOBGEN output library, the job card is harvested from %gbl_target_hilev%.TKANSAM SMP/E
target library where the initial PARMGEN sample job card default is
supplied. If you specified a JOBGEN output library, the job card information
is harvested from that location. You can modify the retrieved data
as needed. The customized job card is saved in the ISPF user profile
pool and persists across ISPF sessions. On this panel, specify the
parameter values appropriate for your environment. In most cases,
the PARMGEN configuration parameters on this panel are required.
Press Enter to proceed to the next panel.
The "Set up/Refresh PARMGEN Work Environment for an RTE (2 of 3)" panel (KCIP@PG2) is displayed.
The values on this panel are read from the profile library and runtime member name you specified on
the preceding panel.
KCIP@PG2 SET UP/REFRESH PARMGEN WORK ENVIRONMENT FOR AN RTE (2 OF 3) ---------
Command ===>
Quick Configuration Mode
GBL_USER_JCL: TDITN.IDTST.PARMGEN.JCL
RTE_PLIB_HILEV: TDITM.IDTST
RTE_NAME: SYSA
Enter parameter values appropriate for your environment:
UNIT / STORCLAS /
VOLSER MGMTCLAS
GBL_TARGET_HILEV: IBM.TARGET.ITM63055________________ ________ / ________ /
HLQ of SMP/E target (TK*) datasets ______ ________
GBL_SYSDA_UNIT: SYSDA___
Work datasets UNIT name
GBL_REGION: 0M______
JCL REGION (specify K/M suffix)
Note: Type BACK to go back one panel. Type UTIL to access utility menu.
Review the values on the panel and override them as necessary.
GBL_TARGET_HILEV
Specifies
the SMP/E high-level qualifier of the SMP/E target (TK*) libraries.
GBL_SYSDA_UNIT
Specifies
the non-VSAM disk UNIT for global work data sets.
Press Enter to proceed to the next panel.
The
Set Up PARMGEN Work Environment for an RTE (3 OF 3) panel (KCIP@PG3)
is displayed. The preset values are the same whether you selected
$MDLHF or not.
KCIP@PG3 SET UP/REFRESH PARMGEN WORK ENVIRONMENT FOR AN RTE (3 OF 3) ---------
Command ===> Scroll ===> PAGE
Enter parameter values appropriate for the LPAR RTE=DEMO.
Press F1=Help for more information.
More: +
RTE_DESCRIPTION: Full RTE w/ Static Hub TEMS/Agents______________
RTE_TYPE: FULL____ (Full, Sharing)
RTE_HILEV: TDITN.IDTST_____________________________ (ex.: TDITN.IDTST
(&hlq portion of Non-VSAM RK* HLQ=&hlq.&rte_name)
RTE_VSAM_HILEV: TDITN.IDTST_____________________________ (ex.: TDITN.IDTST
(&hlq portion of VSAM RK* HLQ=&hlq.&rte_name)
If any RTE dataset HLQ-related parameter values are NONSMS-managed:
RTE_SMS_UNIT: ________ (Non-VSAM disk UNIT type)
RTE_SMS_VOLUME: ________ (Non-VSAM disk VOLSER)
RTE_SMS_MGMTCLAS: ________ (Non-VSAM disk MGMTCLAS)
RTE_SMS_STORCLAS: ________ (Non-VSAM disk STORCLAS)
RTE_SMS_VSAM_VOLUME: ________ (VSAM disk VOLSER)
RTE_SMS_VSAM_MGMTCLAS: ________ (VSAM disk MGMTCLAS)
RTE_SMS_VSAM_STORCLAS: ________ (VSAM disk STORCLAS)
RTE_SMS_PDSE_FLAG: Y (Y, N) (Allocate Non-VSAM PDSE libraries)
If RTE_TYPE is SHARING:
RTE_X_HILEV_SHARING: ___________________________________ (ex.: TDITN.IDTST)
(&hlq portion of shared RTE's HLQ=&hlq.&rte_share)
RTE_SHARE: ___________________________________ ("SMP" value or *&rte_share)
(*&rte_share portion of shared RTE's HLQ=&hlq.&rte_share)
RTE_LOAD_SHARED_LIBS: Y (Y, N) (Is RTE updater of RO shared libs)
If symbolics (system variables or user-defined variables) will be used:
RTE_SYSV_SYSVAR_FLAG: N (Y, N) (System/User variables flag)
Security settings:
RTE_SECURITY_USER_LOGON: NONE____ (RACF, ACF2, TSS, NAM, None)
RTE_SECURITY_FOLD_PASSWORD_FLAG: Y (Y, N) (Fold password to upper case)
RTE_SECURITY_CLASS: ________________________________________________
RTE_X_SECURITY_EXIT_LIB: TDITN.IDTST.DEMO.RKANSAMU______________________
GBL_DSN_ACF2_MACLIB: ________________________________________________
GBL_DSN_ACF2_MACLIB1: ________________________________________________
Local Tivoli Enterprise Monitoring Server (TEMS) settings in this LPAR RTE:
RTE_TEMS_CONFIGURED_FLAG: Y (Y, N) (Configure TEMS in this RTE)
RTE_TEMS_NAME_NODEID: DEMO:CMS__________________________ (e.g.,DEMO:cms))))
KDS_TEMS_TYPE: HUB_____ (Hub, Remote)
KDS_TEMS_HA_TYPE: __ (HA=High Availability Hub TEMS type)
ITM components' communication-related and started tasks settings:
RTE_TCP_PORT_NUM: 1918__________________ (1-65535 port number)
RTE_VTAM_APPLID_PREFIX: CTD___________________ (1-4 char.VTAM APPLID prefix)
RTE_STC_PREFIX: IBM___________________ (1-4 char.started task prefix)
Depending upon your screen resolution, you might have to scroll
down (PF8) to see all the parameters. (Note the More: + which
indicates that there is additional content on the panel.)
If your environment is not SMS-managed, you must specify
the VSAM values. Optionally, you can customize the following parameters.
These values will be inherited by the corresponding product-specific
parameters in the RTE configuration profile.
RTE_TEMS_NAME_NODEID
RTE_TCP_PORT_NUM
RTE_VTAM_APPLID_PREFIX
RTE_STC_PREFIX
Press Enter to proceed to the next panel.
The
Include Products in this PARMGEN RTE panel (KCIP@PGI) is displayed.
This panel lists all the products installed in the product target
library.
KCIP@PGI - INCLUDE (CONFIGURE) INSTALLED PRODUCT(S) IN THIS LPAR R Row 1 of 26
Command ===> Scroll ===> PAGE
Select ("S" or "/") products to CONFIGURE those product(s) in DEMO RTE.
Select or deselect products to include or exclude from configuration.
Products configured in the model or current RTE (reconfiguring) are preselected
When finished, change N to Y to confirm selections. Confirm ==> N (Y, N)
Kpp Component or Product Name and Version
---- ----------------------------------------------------------------------
/ KAH System Automation Monitoring Agent V350
/ KC5 OMEGAMON AI for CICS V610
/ KDO Tivoli Decision Support for z/OS Agent V181
/ KDS Tivoli Enterprise Monitoring Server V630
/ KD4 ITCAM for SOA Agent V711
/ KD5 OMEGAMON AI for DB2 V610
/ KGW OMEGAMON AI for CICS TG V610
/ KI5 OMEGAMON for IMS V550
/ KJJ OMEGAMON AI for JVM V610
/ KMQ OMEGAMON for Messaging - MQ V750
/ KM5 OMEGAMON AI for z/OS V610
/ KNA NetView for z/OS Agent V621
/ KN3 OMEGAMON AI for Networks V610
/ KOB OMEGAMON Enhanced 3270 User Interface V750
/ KQI OMEGAMON for Messaging - Integration Bus V750
/ KRG Advanced Audit for DFSMShsm Agent V260
/ KRH Advanced Reporting and Management for DFSMShsm Agent V260
/ KRJ Advanced Allocation Management Agent V330
/ KRK Automated Tape Allocation Manager for z/OS Agent V330
/ KRN Advanced Catalog Management Agent V260
/ KRV Advanced Backup and Recovery for z/OS Agent V240
/ KRW Tape Optimizer for z/OS Agent V220
/ KS3 OMEGAMON AI for Storage V610
/ KYN ITCAM for Application Diagnostics, TEMA V710.03
End of data
Deselect any products that you do not want to include in
the RTE, then change Confirm ==> N to Y, and press
Enter.
The JCL for the KCIJPCFG job is displayed.
Review the JCL to understand what the job is doing, then submit the job.
The
KCIJPCFG job submits a second job, KCIJPPRF. Wait until both jobs complete before proceeding to the
next step. Until the jobs have completed, you will see a status of "Submitted" for this step on the
main Workflow panel.
Results
The configuration software allocates the PARMGEN work libraries,
creates the configuration profiles, and populates the PARMGEN templates
in IKAN* libraries with runtime members for the products selected
for configuration.