Status monitoring commands

Status monitoring commands start with the show keyword. After you start a monitoring command, the result is information about the specific configuration or status provider. Because monitoring is about status, the information does not include displaying configuration data.

For status monitoring

The general format is as follows.

show provider

For configuration data

The general format is as follows.

show class [name]

In the previous syntax, class is equivalent to the name of the command to enter a specific configuration mode and name is the name of a specific instance of that configuration. Without the optional name parameter, the command displays the configuration of all instances of that class.

For example, to show the configuration for all XML manager instances, enter the following command.

show xml-manager

However, to show the configuration for only the default XML manager, enter the following command.

show xml-manager default

Note: The show profile status monitoring command is for the profiling of stylesheets. To view the configuration of cryptographic profiles, use the show cryptoprofile command when in global mode.

Status monitoring commands are available in all configuration modes, unless otherwise indicated. See the following table for the available commands.

Table 1. Status monitoring commands
Command	Purpose
show accepted-connections	This command lists the number of accepted connections for specific intervals.
show amqp-broker-status	This command displays message statistics for AMQP brokers.
show analytics-endpoint-status	This command lists details about the analytics endpoints.
show analytics-endpoint-jwt-status	This command lists JWT details about analytics endpoints.
show api-http-connections	This command lists statistics about HTTP connections by API gateway for specific intervals.
show api-document-cache-status	This command displays status information about the document cache for API gateway services.
show api-statistics	This command displays general data and stylesheet compilation data for only API gateway services.
show api-stylesheet	This command displays information about a specific compiled stylesheet managed by an API gateway.
show api-stylesheets	This command displays data about cached stylesheets managed by API gateway services.
show api-stylesheet-cache-status	This command displays the current status of the stylesheet cache for the API gateway.
show api-stylesheet-execution-means	This command displays the mean compilation time for stylesheets used by API gateway services for specific intervals.
show api-stylesheet-status	This command displays status of compiled stylesheets and WSDL files for an API gateway.
show api-stylesheet-executions	This command lists the number of compilations for stylesheets used by API gateway services for specific intervals.
show api-oauth-caches-status	This command lists information about the API OAuth cache for each OAuth provider.
show api-subscriber-status	This command shows information about API subscribers.
show audit-log	This command displays the contents of the audit log.
show audit-search	This command searches the audit log and displays matching events.
show authcookie-cache-status	This command lists information about `AuthCookie` cache entries.
show b2bgw-quiesce-status	This command displays information about the quiesce status of B2B gateway services.
show b2b-ebms-mpc-status	This command displays the status of the ebMS message partition channels (MPCs).
show b2b-high-availability-status	This command displays information about the status of B2B high availability.
show chkpoints	This command displays information about the available checkpoint configuration files.
show client-known-host-summary	This command displays the summary of the SSH known host table for SSH client profiles.
show client-known-hosts	This command displays the SSH known host table for SSH client profiles.
show clock	This command displays the current time, time zone, and uptimes.
show config-sequence-status	This command shows information about the configuration scripts, their runtime healthiness, and the generated output files.
show countlimit-assembly-status	This command shows information about assembly count limit.
show cpu	This command lists average CPU usage for specific intervals.
show crypto-engine	This command displays the type and status of the crypto accelerator.
show crypto-hw-disable	This command indicates how many aspects of the cryptographic card are disabled.
show crypto-mode	This command displays state information about the system-wide crypto mode.
show debug-actions	This command displays status information about the debug sessions.
show dns-cache	This command lists the hostnames that the DNS service resolved to its IP addresses.
show document-cache-status	This command displays status information about the document cache.
show document-status	This command displays status information about documents in the document cache.
show documentcache	This command displays the current size of the document cache and the number of documents cached.
show domains	This command displays status information about each domain.
show domains-memory	This command displays memory usage by services and by caches for domains.
show dynamic-tibco-ems	This command displays message statistics for dynamic TIBCO EMS servers.
show ethernet-counters	This command displays the statistics about Ethernet devices.
show failure-notification-status	This command displays the history of recently generated and uploaded error reports.
show features	This command displays information about licensed features.
show file	This command displays the contents of a printable file in a DataPower directory.
show file-hash	This command displays the generated hash for a file in a DataPower directory.
show firmware	This command displays the current firmware version, with image type and installation date.
show firmware-version	This command displays the current firmware version, without image type and installation date.
show gateway-peering-cache-status	This command lists information about the cache for gateway-peering instances.
show gateway-peering-cluster-status	This command shows the list of cluster-based gateway peering members and their individual status.
show gateway-peering-key-status	This command lists information about the gateway-peering instances on the server.
show gateway-peering-status	This command shows statistics about the members in peer groups and their individual status.
show gateway-transactions	This command displays pending transactions of a service.
show gatewayscript-status	This command displays status information about GatewayScript run times.
show git-operation-status	This command displays the status of GitOps operations.
show git-template-operation-status	This command displays the status of operations against GitOps templates.
show graphql-status	This command lists information about the status of GraphQL transactions for the APIs in the domain.
show hsm-keys	This command displays the current firmware version, with image type and installation date.
show http	This command list the HTTP mean transaction rate and time for DataPower services for specific intervals.
show http-connections	This command lists statistics about HTTP connections by XML manager for specific intervals.
show httpserv-quiesce-status	This command displays information about the quiesce status of HTTP service services.
show idg-mq-conversations	This command shows conversation information for IBM MQ v9+ queue managers.
show idg-mqqm	This command shows message statistics for static IBM MQ v9+ queue managers.
show ip	This command lists IP information.
show ipaddress	This command provides IP address information about interfaces.
show ip-multicast-status	This command lists IP information.
show ipmi-sel-events	This command displays the IPMI SEL events that the BMC collected.
show kafka-cluster-status	This command displays message statistics for Kafka clusters.
show kerberos-tickets	This command displays information about Kerberos service tickets in the cache.
show known-hosts	This command displays the SSH known host table.
show ldap-pool-entries	This command lists information about LDAP connections in LDAP connection pools.
show ldap-pool-status	This command lists information about LDAP connection pools.
show library-version	This command displays information about Kerberos service tickets in the cache.
show link	This command provides status about all network interfaces.
show link-aggregation-member-status	This command lists members in link aggregation interfaces.
show link-aggregation-status	This command provides statistics for aggregate interfaces.
show load	This command displays the usage estimates of system resources as percentages.
show loadbalancer-status	This command displays the status of all load balancer groups.
show local-self-balanced-services	This command describes all local services that listen for incoming connections on the virtual IP address of a self-balanced standby group.
show log	This command displays the default log.
show logging	This command displays a specified log.
show loglevel	This command displays the log level for log targets.
show luna-latency	This command displays information about the latency of the cryptographic transactions on the Luna HSM.
show mean-transaction-time	This command lists the mean transaction time for DataPower services for specific intervals.
show memory	This command displays detailed information about memory usage.
show message-count-filters	This command displays information about filters for count monitors.
show message-counts	This command lists statistics for count monitors for specific intervals.
show message-duration-filters	This command displays information about filters for duration monitors.
show message-durations	This command lists statistics about duration monitors for specific intervals.
show message-sources	This command displays information about sources for message monitors.
show mpgw-quiesce-status	This command displays information about the quiesce status of multiprotocol gateway services
show ndcache	This command shows the status of IPv6 neighbor discovery translations on all interfaces.
show network-interface	This command shows generic status of all local network interfaces.
show ntp-refresh	This command lists the refresh status for the current NTP server.
show oauth-caches-status	This command lists information about OAuth cache tickets.
show oauth-gateway-peering-status	This command lists information about the API OAuth keys in the API OAuth cache.
show oauth-gateway-peering-summary	This command lists information about the token store for API OAuth keys.
show odr-connectorgroup-status	This command shows the status of all ODR connector groups
show odr-loadbalancer-status	This command shows the status of the ODR Load Balancer Group members.
show otel-exporter-status	This command displays the status for the OpenTelemetry exporter.
show password-map	This command lists the password aliases in the password maps.
show policy-domains-supported	This command shows data about policy domains.
show profile	This command summarizes profiling information about stylesheets.
show quota-enforcement-status	This command shows the quota enforcement status.
show raid-array	This command displays the status of the RAID array.
show raid-battery-module	This command displays state data about the battery backup unit of the RAID controller.
show raid-controller	This command displays state data about the RAID controller.
show raid-logical-drive	This command displays the status of the RAID logical drive.
show raid-partitions	This command displays the status of the partitions on the RAID volume.
show raid-physical-drive	This command displays the status of the RAID physical drives.
show ratelimit-api-status	This command shows information about the enforcement of API rate limit scheme.
show ratelimit-assembly-status	This command shows information about the enforcement of the assembly rate limit or burst limit scheme.
show ratelimit-concurrent-status	This command displays status information about all concurrent transactions that are stored in data storage.
show ratelimit-count-status	This command displays status information about all counters that are stored in data storage.
show ratelimit-rate-status	This command displays status information about all rate-based thresholds and the associated metadata that is stored in data storage.
show ratelimit-tokenbucket-status	This command displays status information about all token bucket thresholds and the associated metadata that is stored in data storage.
show receive-kbps	This command lists interface-specific statistics for received transactions in kibibit per second for specific intervals.
show receive-packets	This command lists interface-specific statistics for received transactions in packets per second for specific intervals.
show route	This command shows the routing table.
show running-config	This command displays the running configuration as a set of commands.
show safstatus	This command lists request information for NSS clients.
show self-balanced-status	This command displays the status of self-balanced services in standby groups.
show sensors-current	This command displays the values for sensors that read electrical current.
show sensors-fans	This command displays the values for sensors that read the speed of the fans.
show sensors-other	This command displays the status of sensors that have true or false values.
show sensors-power	This command displays the values for sensors that read electrical power.
show sensors-temperature	This command displays the values for sensors that read temperatures.
show sensors-voltage	This command displays the values for sensors that read voltage.
show services	This command lists all local services that are listening for incoming connections.
show services-memory	This command displays memory usage for active services.
show snmp-status	This command displays the status of the SNMPv3 engine.
show source-amqp-quiesce-status	This command displays information about the quiesce status of AMQP handlers.
show source-as1-quiesce-status	This command displays information about the quiesce status of AS1 handlers.
show source-as2-quiesce-status	This command displays information about the quiesce status of AS2 handlers.
show source-as3-quiesce-status	This command displays information about the quiesce status of AS3 handlers.
show source-ebms2-quiesce-status	This command displays information about the quiesce status of ebMS2 handlers.
show source-ebms3-quiesce-status	This command displays information about the quiesce status of ebMS3 handlers.
show source-ftp-poller-quiesce-status	This command displays information about the quiesce status of FTP poller handlers.
show source-ftp-server-quiesce-status	This command displays information about the quiesce status of FTP server handlers.
show source-http-quiesce-status	This command displays information about the quiesce status of HTTP handlers.
show source-https-quiesce-status	This command displays information about the quiesce status of HTTPS handlers.
show source-idg-mq-quiesce-status	This command displays information about the quiesce status of IBM MQ v9+ handlers.
show source-idg-mqmft-quiesce-status	This command displays information about the quiesce status of IBM MQ v9+ MFT handlers.
show source-imsconnect-quiesce-status	This command displays information about the quiesce status of IMS Connect handlers.
show source-kafka-quiesce-status	This command displays information about the quiesce status of Kafka handlers.
show source-nfs-poller-quiesce-status	This command displays information about the quiesce status of NFS poller handlers.
show source-pop-poller-quiesce-status	This command displays information about the quiesce status of POP poller handlers.
show source-raw-quiesce-status	This command displays information about the quiesce status of stateless raw XML handlers.
show source-sftp-poller-quiesce-status	This command displays information about the quiesce status of SFTP poller handlers.
show source-ssh-server-quiesce-status	This command displays information about the quiesce status of SFTP server handlers.
show source-stateful-tcp-quiesce-status	This command displays information about the quiesce status of stateful raw XML handlers.
show source-wasjms-quiesce-status	This command displays information about the quiesce status of WebSphere JMS handlers.
show sql	This command provides statistics about SQL data sources.
show sql-connections	This command provides statistics about the connection pool for SQL data sources.
show sqlruntime	This command provides about SQL runtime environments.
show sse-connections	This command displays statistics about server-sent events connections.
show sslproxy-quiesce-status	This command displays information about the quiesce status of TLS proxy services.
show standby	This command displays information about the standby configuration for interfaces.
show startup-config	This command displays the startup configuration.
show startup-errors	This command displays the contents on the startup error log.
show static-hosts	This command displays the table of configured static hosts and host aliases to prevent DNS lookups.
show statistics	This command displays general data and stylesheet data for all services except API gateway services.
show stylesheet	This command displays compilation information about a specific stylesheet.
show stylesheets	This command displays data about stylesheets that are cached by an XML manager.
show stylesheet-cache-status	This command displays the current status of the stylesheet cache for the XML manager.
show stylesheet-executions	This command lists the number of compilations for stylesheets for specific intervals.
show stylesheet-execution-means	This command displays the mean compilation time for stylesheets for specific intervals.
show stylesheet-status	This command displays status of compiled stylesheets and WSDL files for XML managers.
show subscriber-cache-status	This command shows information about API subscriber cache.
show system	This command displays the system settings.
show tcp	This command lists the current TCP connections followed by the number of connections in each state.
show tcp-connections	This command lists the number of TCP connections in specific states.
show tcp-table	This command lists the current TCP connections.
show tcpproxy-quiesce-status	This command displays information about the quiesce status of TCP proxy services.
show tenant-licenses	This command displays the number of tenants that can be installed and are installed on a DataPower appliance.
show tenant-memory	This command displays information about the memory usage of the landlord and its tenants.
show throughput	This command displays interface-specific traffic statistics.
show tibco-ems	This command shows message statistics for static TIBCO EMS servers.
show tibems-server-quiesce-status	This command displays information about the quiesce status of TIBCO EMS handlers.
show time	This command displays the current time, time zone, and uptimes.
show transaction-rate	This command lists the transaction rate for DataPower services for specific intervals.
show transmit-kbps	This command lists interface-specific statistics for transmitted transactions in kibibit per second for specific intervals.
show transmit-packets	This command lists interface-specific statistics for transmitted transactions in packets per second for specific intervals.
show user-agent	This command displays the active policies of a user agent.
show users	This command lists all users who are currently logged in.
show version	This command displays the version of the firmware and libraries.
show virtual-platform	This command shows information about the deployed DataPower Gateway.
show vlan-status	This command provides information about all VLAN interfaces.
show webapp-allowed	This command lists the number of approvals for web application firewall services for specific intervals.
show webapp-rejected	This command lists the number of rejections for web application firewall services for specific intervals.
show web-application-firewall-quiesce-status	This command displays information about the quiesce status of web application firewall services.
show websocket-connections	This command lists information and statistics about WebSocket connections.
show websphere-jms	This command displays message statistics for WebSphere JMS servers.
show web-token-service-quiesce-status	This command displays information about the quiesce status of web token service services.
show ws-operation-metrics	This command provides metrics about Web Services operations for web service proxy services.
show ws-operation-status	This command provides status about Web Services operations for web service proxy services.
show ws-serviceversion-status	This command lists the refresh status for web services versions for multiple protocol gateway services.
show ws-wsdl-status	This command provides status about web services WSDL files for web service proxy services.
show wsgw-quiesce-status	This command displays information about the quiesce status of web service proxy services.
show wsm-agent-status	This command provides details about the WSM agent in the domain.
show wsm-spooler	This command provides information about WSM agent subscribers.
show wsrr-saved-search-subscription-attachment-status	This command displays policy attachments status for WSRR saved search subscription.
show wsrr-saved-search-subscription-service-status	This command displays WSDL file data for active WSRR saved search subscriptions.
show wsrr-saved-search-subscription-status	This command displays operational details of WSRR saved search subscriptions.
show wsrr-subscription-service-status	This command displays WSDL file data for WSRR subscriptions.
show wsrr-subscription-status	This command displays operational details of WSRR saved search subscriptions.
show wxs-grid-status	This command shows access metrics for eXtreme Scale grid configurations.
show xmlfirewall-quiesce-status	This command displays information about the quiesce status of XML firewall services.
show xml-names-status	This command shows the use of the XML names and JSON keys.