Message filter action commands

Message filter action mode provides the commands to create or modify a message filter action.

To enter the mode, use the global monitor-action command. To delete a message filter action, use the no monitor-action command.

While in this mode, use the commands in the following table to define a message filter action.

To view the current configuration, use the show command.
To restore default values, use the reset command.
To exit this configuration mode without saving changes to the running configuration, use the cancel command.
To exit this configuration mode and save changes to the running configuration, use the exit command.

Table 1. Message filter action commands
Command	Purpose
admin-state	This command sets the administrative state for the configuration.
block-interval	This command sets the duration during which an over-threshold message is denied service.
log-priority	This command sets the priority of the log event when a control procedure is triggered.
summary	This command specifies the brief, descriptive summary for the object instance.
type	This command sets the control procedure to trigger when a monitored message type exceeds its threshold value.