Installing the server in silent mode

In silent mode, you specify the installation properties in a text file and then run the server installation without command-line prompts.

Before you begin

Make sure that you have a license server with available licenses. See License management.
Ensure that the system that you are installing the server on meets the system requirements. See System requirements and performance considerations.
Ensure that a supported version of a Java™ Runtime Environment (JRE) or Java Development Kit (JDK) is installed on the computer on which you are installing IBM UrbanCode Deploy. For more information, see System Requirements for IBM UrbanCode Deploy. Supported JREs are included with the installation files.
Important: Beginning in version 6.2.2, the IBM UrbanCode Deploy server and agent relays require a Java Runtime Environment (JRE) or Java Development Kit (JDK) version 8.

Important:
For best results, download and use the latest available version of the IBM Java Runtime Environment (JRE) for the IBM UrbanCode Deploy server and agent relays. An IBM JRE is available as a separate download. See the IBM developer kits page to get the latest version. Install the IBM JRE according to the documentation on the page. Be sure to set the JAVA_HOME system variable to the location of the IBM JRE. If you are updating or changing the JRE to the latest version, see Changing or updating the JRE of servers and Updating the JRE location for agent relays for instructions. For documentation on the IBM JRE, see IBM SDK, Java Technology Edition.

Using JREs or Java development kits other than those provided by IBM might cause unexpected results.
Set the JAVA_HOME system variable to the location of the JRE or JDK that you are using.
If you are installing the server to be compliant with Federal Information Processing Standards (FIPS), the computer must use a supported version of an IBM JRE or JDK.
If you are installing the server in a production environment, install and configure the server database before you install the server. See Installing the server database. If you are not installing in a production environment, you can install an instance of Apache Derby during the installation steps. You can migrate the database to a different database system later, as described in Migrating the server database.
If you are using a database other than Apache Derby for the server, place the JAR file for the database driver in the lib/ext folder of the installation program.
If you are installing on AIX®, the unzip program is required.
Make sure that your networks and firewalls allow communication on the required ports. See Firewall and communication configuration.
To install and run the server on Linux as a non-root user, create a user to use when you install and run the server. Also, ensure that the user has read and write permission to the folder to which you are installing the server.
Ensure that there is no limit on the maximum memory size and virtual memory size. For example, on most Linux systems, you can run the ulimit -m and ulimit -v commands and ensure that both return the value unlimited. To find out how to remove the limit on the maximum memory size and virtual memory size, see the documentation for the operating system.

If you are adding the server to a high-availability cluster, including as a cold standby server:

Configure the high-availability cluster; see Setting up high-availability clusters.
Ensure that the system on which you are installing the new server has a connection to the cluster network storage and that the system can connect to the database that the cluster is using.
Each server in the cluster must run the same version of IBM UrbanCode Deploy.

For information about high-availability clusters, see High availability and failover. For information about cold standby, see Adding cold standby servers.

About this task

You specify the server installation properties in the install.properties file, which is located in the root folder of the installation files. During the installation process, the server stores these properties in the installed.properties file, which is in the conf/server folder of the server installation files. If you have an already existing installation, you can use its installed.properties file as an example of the properties.

Note: Some of the properties in the table below can be changed after the server has been installed and others cannot. After the server starts for the first time, the server adds other properties to the installed.properties file. Some of these additional properties can be changed and others cannot.

Procedure

Download and extract the installation files for IBM UrbanCode Deploy. These files are available for download from the IBM Passport Advantage® website. See the IBM UrbanCode Deploy download document.
If you are using a database other than Apache Derby, place the JAR file for the database in the lib/ext folder of the installation files.
In the server installation files, open the install.properties file in a text editor and add the following line of code to the end of the file:
```
nonInteractive=true
```
The file looks similar to the following example:
```
component.name=IBM UrbanCode Deploy
component.directory=ibm-ucd/server
version=6.2.1.1.123456
nonInteractive=true
```

Customize the installation by specifying the properties in the following table. If you do not specify a property, the default value is used. These properties are copied to the installed.properties file of the completed installation.

If you specify a path in a property on a Windows system, you must escape any backslash (\) characters that are in the path. For example, to set the install.server.dir property to C:\ibm-ucd, specify install.server.dir=C\:\\ibm-ucd. See java.util Class Properties.

Table 1. Installation properties
Property	Default value	Description
com.urbancode.ds.web.rest.integration.vsys.VsysHelper.timeout	120	The time, in seconds, that server waits while it provisions an IBM PureApplication® System environment. For complicated patterns, you might have to increase this value. Specify a value greater than the longest provision session requires. For example, if no provision is expected to take longer than 10 minutes, specify `900`, or 15 minutes.
database.databasename	None	The name of the database to use when you specify `db2zos` in the database.type property.
database.derby.port	11377	The port for the Derby database. This property is used only for Derby databases.
database.type	`derby`	The type of database. Valid values are `derby`, `mysql`, `oracle`, `sqlserver`, `postgres`, `db2`, and `db2zos`. Warning: Derby is for evaluation purposes only; do not use Derby for a production server. In addition, if you install the server as a node in a high-availability cluster, you cannot use Derby.
encryption.keystore	../conf/encryption.keystore	The path to the encryption keystore. This parameter is optional if you have an existing installation that you are upgrading.
encryption.keystore.alias	`desedekeyuniqueID`	The encryption keystore alias. This parameter is optional if you have an existing installation that you are upgrading.
hibernate.connection.driver_class	The default value depends on the type of database	The class name of the database driver, such as `com.ibm.db2.jcc.DB2Driver` for DB2® or `org.apache.derby.jdbc.ClientDriver` for Derby.
hibernate.connection.password	`password`	The password for the database connection. This password is encrypted during the installation process.
hibernate.connection.url	`jdbc:derby://localhost:11377/data`	The connection URL for the database. For more information on building a database connection string, refer to documentation from your database provider.
hibernate.connection.username	`ibm_ucd`	The user name for the database connection. Unless skip.db.install is set to `Y`, this user must have permission to create tables in the database.
hibernate.default_schema	None	The name of the database schema. This property is required only for Oracle databases on Windows.
install.ha	`N`	Specify `Y` if the new server is part of a high-availability cluster. If you specify `Y`, Derby is not an option for the server. In this case, you must specify database information in properties such as database.type and hibernate.connection.url.
install.java.home	The value of the JAVA_HOME system variable	The location of the installation of Java to use. This value must match the value of the JAVA_HOME system variable. It must also match the location of the JRE or JDK that you use to run the installation file.
install.server.dir	`/opt/ibm-ucd-6.0/server` (Linux) or `C:\Program Files\ibm-ucd\server` (Windows)	The installation directory for the server.
install.server.web.always.secure	`Y`	Specify `Y` to always use secure connections to the server. Specify `N` to allow non-secure connections.
install server.web.host	The host name of the server	If you are installing a stand-alone server, specify the host name of the computer that hosts the server. If you are installing a stand-alone server in a production environment, consider specifying a host name that is not tied to the physical computer. By specifying such a host name, you can expand the server to a high-availability system later. If you are installing a server in a high-availability cluster, specify the host name of the load balancer for the cluster.
install.server.web.https.port	8443	Specify the HTTPS port for the server. The default value is `8443`. If you are installing IBM UrbanCode Deploy and IBM UrbanCode Release, be sure to use a different port for each product. If you are installing multiple instances of IBM UrbanCode Deploy on the same computer, be sure to use a different port for each instance.
install.server.web.ip	0.0.0.0	The IP address that the server listens on. Specify `0.0.0.0` to listen on all addresses that are available to the system.
install.server.web.port	8080	Specify the HTTP port for the server. The default value is `8080`.If you are installing IBM UrbanCode Deploy and IBM UrbanCode Release, be sure to use a different port for each product. If you are installing multiple instances of IBM UrbanCode Deploy on the same computer, be sure to use a different port for each instance.
rcl.server.url	None	Specify the connection information for the license server. You can specify the port and host name or IP address for the license server, such as `27000@RCLServer.example.com`. To avoid problems when a license server is not available, you can specify multiple license servers. In this case, separate each address with colons on Linux and UNIX or semicolons on Windows, as in the following example: `27000@RCLServer.example.com;27000@backupRCLServer.example.com`. For more complicated license server scenarios, see this document: http://www-01.ibm.com/support/knowledgecenter/SSSTWP_8.1.4/com.ibm.rational.license.doc/topics/r_specify_lic_servers.html. For more information about setting up a Rational® Common Licensing server and applying licenses, see the Rational Common Licensing help: Rational Common Licensing v8.1.4 - 8.1.4.9 documentation. For more information about licensing, see License management. This parameter is optional if you have an existing installation that you are upgrading.
server.activemq.queue.memory	`100 mb`	The memory limit for queues in Apache ActiveMQ. To prevent a single queue from using too much memory, this amount of memory should be less than one-fifth of the system memory limit in server.activemq.system.memory. Specify an integer value followed by `mb` for megabytes or `gb` for gigabytes.
server.activemq.system.memory	`512 mb`	The total amount of memory that Apache ActiveMQ can use on the system. This amount of memory should always be much less than the maximum amount of memory that is allotted to the server. On Linux and Unix systems, the maximum server memory is set in the set_env file, in the `JAVA_OPTS` parameter, in the `-Xmx` parameter. Specify an integer value followed by `mb` for megabytes or `gb` for gigabytes.
server.activemq.topic.memory	`100 mb`	The memory limit for topics in Apache ActiveMQ. To prevent a single topic from using too much memory, this amount of memory should be less than one-fifth of the system memory limit in server.activemq.system.memory. Specify an integer value followed by `mb` for megabytes or `gb` for gigabytes.
server.appdata.dir	The default application data folder is /opt/ibm-ucd/server/appdata on Linux and C:\Program Files\ibm-ucd\server\appdata on Windows.	The path to the application data directory. The directory must be accessible to the server, and you must have the appropriate permissions. If you are installing a node in a high-availability cluster, this directory must be on the cluster network storage.
server.initial.password	None	Specify the starting password for the administrator account on the server. The administrator user name is `admin`.
server.jms.mutualAuth	`false`	Specify `true` to require mutual authentication between servers and agents. See Configuring mutual authentication.
server.jms.port	7918	Specify the port that agents use to contact the server. The default value is `7918`. If you are using failover servers, you must list the JMS connection ports of those servers here, separated by commas. Each server must have a corresponding port number in this property, even if some of those servers use the same port.
server.keystore	None	The path to the server keystore.
server.keystore.password	`changeit`	The password for the server keystore. This password is encrypted during the installation process. Additionally, this password is initially assigned to the `encryption.keystore.password` property.
skip.db.install	N	If the value is `Y` or `yes`, the installation process does not create the database schema. For example, you skip creating the schema if you have a pre-populated database, such as if you are adding a server to a cluster. In this case, you must still provide the database connection information in the other properties such as hibernate.connection.url.

The file looks similar to the following example:

component.name=IBM UrbanCode Deploy
component.directory=ibm-ucd/server
version=6.0.0.0.123456
nonInteractive=true

install.server.dir=/opt/ibm-ucd/server
install.java.home=/opt/IBM/ibm-java-i386-80
install.server.web.always.secure=Y
install.server.web.host=myserver.example.com
install.server.web.https.port=8443
install.server.web.ip=0.0.0.0
install.server.web.port=8080
database.type=derby
hibernate.connection.username=ibm_ucd
hibernate.connection.password=password
hibernate.connection.url=jdbc:derby://localhost:11377/data
database.derby.port=11377
rcl.server.url=27000@RCLServer.example.com

server.initial.password=admin

Save the file.
Run the installation file with the command install-server.bat on Windows or the command ./install-server.sh on Linux.

Results

The installation program installs the server. If you install the server as a node in high-availability cluster, the installer loads the existing encryption keystore that is in the shared storage folder by using the default settings. If the default password is incorrect, you are prompted for the password. If after three attempts you do not enter the correct password, the installation process stops. If the keystore has more than one alias, you are prompted to specify an alias.

What to do next

To start the server, see Starting and stopping the server.

If you selected mutual authentication, set up the authentication. See Configuring mutual authentication.

When you run the server for the first time, you might see an error message that says that no agent or tag is configured to import new component versions. To import component versions, including built artifacts, you must use an agent, and the server requires that you specify a default agent for this purpose. You can override this default setting when you create a component. Follow these steps to specify a default agent or agent tag:

To specify a default agent, click System > System Settings and under General Settings, clear the Use Agent Tag For Integration check box. Then, select an agent in the Agent for Version Imports list. Then, at the bottom of the page, click Save.
To specify a default agent tag, click Settings > System Settings and under General Settings, clear the Use Agent Tag For Integration check box. Then, select an agent tag in the Agent Tag for version imports list. Then, at the bottom of the page, click Save. If no tags are listed, add a tag to one or more agents on the server.

If you see "Out of memory" errors, increase the amount of memory that is available to the IBM UrbanCode Deploy service. See Increasing the amount of memory that is available to the server.

If you are using Derby, you might see the following error in the results of the installation program:

[echo]     waiting for db to start - 6 seconds remaining
[echo]     waiting for db to start - 3 seconds remaining
[echo] Could not start database
[echo] Stopping embedded database ...
[java] Tue Feb 04 09:11:25 EST 2014 : Could not connect 
  to Derby Network Server on host localhost, port 11377: 
  Connection refused

If you see this error, you must change the default security settings for the Java installation on the server:

Open the Java security policy file in a text editor. If you are using a Java Runtime Environment (JRE), this file is at the location JAVA_HOME/lib/security/java.policy, where JAVA_HOME is the base folder of the Java installation. If you are using a Java Development Kit (JDK), the file is at the location JAVA_HOME/jre/lib/security/java.policy.
In the java.policy file, in the section that is labeled // default permissions granted to all domains, within the grant{} block, add the following code:
```
permission java.net.SocketPermission "localhost:11377", "listen";
```
Run the installation program again.

Feedback