Using the display menu

Learn how to use the display menu on the TFT - LCD display.

To activate the display menu, press the Select/Menu button. The Main menu is displayed.

The Main menu screen.

The menu choices are described in the following list:

  • Brightness/Contrast
    • Brightness - Brightness Slider Default 50, incremental adjustment by 0 from 1 - 100
    • Contrast - Contrast Slider Default 50, incremental adjustment by 0 from 1 - 100
  • Display Settings
    • Wide Mode
      • 1:1 - Uses exact pixel count from video controller
      • Aspect - Uses pixel ratio but scales to largest available picture
      • Fill - Default. Scales incoming image to utilize full screen
    • Horizontal Position - Screen picture adjustment - Default at 50 Center of the Screen, incremental adjustment by 1 pixel from 0 - 100
    • Vertical Position - Screen picture adjustment - Default at 50 Center of the Screen, incremental adjustment by 1 pixel from 0 - 100
    • Sharpness - Visual reference to light and dark - Default 50, incremental adjustment by 10 from 0 - 100
    • Pixel Clock - Analog input control - Default Panel Dependent
    • Phase - Analog input control - Default Panel Dependent
    • Display Info - Display Resolution and Refresh Rate
    • Reset Display settings - Reset Display Settings to Factory Default - confirmation required
  • Color Settings
    • Standard
    • Warm
    • Cool
    • Custom Color - If selected, the following RGB default values are displayed:
      • Red - Default 50, incremental adjustment by 1, from 0 - 100
      • Blue - Default 50, incremental adjustment by 1, from 0 - 100
      • Green - Default 50, incremental adjustment by 1, from 0 - 100
    • Reset Color Settings - Resets color to factory default - confirmation required
  • Auto Adjust - Auto adjustment - confirmation required
  • Other Settings
    • Language
      • English - Converts OSD UI into local language chosen by user (default language)
      • Spanish - Converts OSD UI into local language chosen by user
      • French - Converts OSD UI into local language chosen by user
      • German - Converts OSD UI into local language chosen by user
      • Japanese - Converts OSD UI into local language chosen by user
      • Korean - Converts OSD UI into local language chosen by user
      • Simple Chinese - Converts OSD UI into local language chosen by user
    • Menu Timer Sliding scale by 5 second increments, from 5 to 100 - default is 20
    • DDC/CI On/Off - default is On
    • LCD Conditioning On/Off - default is Off
    • Reset Reset Other settings to Factory Default - confirmation required
  • Factory Reset - Reset all settings to default