Operations
Operations contains the tasks for operating managed systems.
- Power On
Use the Power On task to start a managed system. - Power Off
Shut down the managed system. Powering off the managed system will make all partitions unavailable until the system is again powered on. - Power Management
You can reduce the managed system's processor power consumption by enabling power saver mode. - LED Status
View system attention LED information, light specific LEDs to identify a system component, and test all LEDs on a managed system. - Schedule Operations
Create a schedule for certain operations to be performed on the managed system without operator assistance. - Advanced System Management
The HMC can connect directly to the Advanced System Management (ASM) interface for a selected system. - Utilization Data
You can set the HMC to collect resource utilization data for a specific managed system or for all systems the HMC manages. - Rebuild
You can extract the configuration information from the managed system and rebuild the information on the Hardware Management Console (HMC). - Change Password
Change the HMC access password on the selected managed system
Parent topic: Systems Management for Servers
Last updated: Fri, December 06, 2019