Licensed Internal Code detected an operating system program
problem.
Read the danger notices in
Licensed Internal Code isolation procedures before
continuing with this procedure.
- If the system has logical partitions, perform this procedure
from the logical partition that reported the problem. To
determine if the system has logical partitions, go to Determining whether the system has logical partitions before continuing with this procedure.
- Select Manual mode and perform an
IPL to DST. See Performing
an IPL to dedicated service tools.
Does the same SRC occur?
- Yes: Go to step 5.
- No: Does the same URC appear on the console?
- No: Continue with the next step.
- Yes: Go to step 4.
- Does a different SRC occur, or does a different URC appear
on the console?
- Yes: Use the new SRC or reference code
to correct the problem. If the procedure for the new SRC sends you
back to this procedure, then continue with the next step. This
ends the procedure.
- No: Select Perform an IPL on
the IPL or Install the System display to complete the IPL.
Is
the problem intermittent?
- Yes: Continue with the next step.
- No: This ends the procedure.
- Copy the main storage dump to removable
media. See Storage dumps.
- Report a Licensed Internal Code problem
to your next level of support. This ends the
procedure.
