PCI_IOV

The single root I/O virtualization (SR-IOV) adapter might be failing.

To determine the location of the SR-IOV adapter, complete the following steps:

1. Is a location code available in the serviceable event view for this failing item?

   Yes:

   Go to step 3.

   No:

   Continue to the next step.

2. To determine the location of the failing item, complete the following steps:
   1. Record the Dynamic Reconfiguration Connector (DRC) index, which is word 4 of the reference code.
   2. The DRC index is of the form xxxxyyyy, where yyyy is the hexadecimal bus number. Go to Card Positions and use the hexadecimal bus number to find the location of the failing item. Then continue with the next step.
3. Is the system managed by a management console?

   Yes:

   Use the management console to replace the failing item at the location identified in this procedure.

   No:

   Use the following table to identify the description, part number, and location of the failing item to be replaced. Replace the failing item by using the replacement procedures found in the location information.

   Table 1. Failing items for symbolic FRU PCI_IOV

   Type and Model	Location code	Description	Part number	Location information
   5148-21L, 5148-22L, 8247-21L, 8247-22L, 8247-42L, 8284-21A, 8284-22A, 8286-41A, or 8286-42A	Un-P1-Cx	PCIe adapter	Remove the adapter to determine the part number or use the CCIN of the adapter and go to Managing PCI adapters to determine the part number.	See Part locations and location codes.

This ends the procedure.