POWER7 information

Replacing a 572F/575C card set concurrent maintainable battery pack

Use this procedure to replace the concurrent maintainable battery pack on adapter type CCIN 572F/575C card set.

Attention: Before you continue with this procedure, determine that it is safe to replace the cache battery pack. See Maintaining the rechargeable battery on the 57B7, 57CF, 574E, and 572F/575C SAS adapters. It is safe to replace the cache battery pack when Yes is displayed next to Battery pack can be safely replaced. If the cache data present LED is flashing, do not replace the cache battery pack or the cache data is lost. See the feature comparison tables for PCIe and PCI-X cards for the LED details and its location.

To replace a 572F/575C concurrent maintainable battery pack, complete the following steps:

  1. Using the following illustration to locate the battery components, locate the metal cover (A) that holds the battery pack. Pull out on the push-rivet (B) to release the metal cover (A).
    Figure 1. Replacing the 572F/575C cache battery
    Replacing the 572F/575C cache battery
    • (A) Metal cover
    • (B) Push-rivet
    • (C) Tab
  2. Remove the battery unit by pulling on tab (C).
    Note: Ensure that the cache battery pack is disconnected for at least 60 seconds before you connect the new battery. This duration is the minimum amount of time that is needed for the card to recognize that the battery has been replaced.
  3. Install the new cache battery pack by reversing this procedure. Ensure that the replacement cache battery pack is fully seated.
  4. Restart the write cache of the adapter by completing the following steps:
    1. Return to the Work with Resources containing Cache Battery Packs display and select the Start IOA cache. Press Enter.
    2. Ensure that you get the message Cache was started.
Parent topic: Replacing a battery pack
Parent topic: Replacing a battery pack

Send feedback Rate this page

Last updated: Wed, January 17, 2018