POWER7 information

SAS RAID enablement

You might need to configure redundant array of independent disks (RAID) on your serial-attached SCSI (SAS) disk drives in your system enclosure. Use these instructions to install features to enable RAID on your system.

The following instructions will enable you to install SAS RAID Enablement cards to prepare your system to use SAS disk drives in a RAID configuration.

To find information on installing adapters or configuring RAID on your system see the following links:

To view the PDF file of PCI adapters, approximately 40 MB in size, see PCI adapters
To view the PDF file of SAS RAID controllers for Linux, approximately 2 MB in size, see SAS RAID controllers for Linux
To view the PDF file of SAS RAID controllers for AIX®, approximately 2 MB in size, see SAS RAID controllers for AIX
To view the PDF file of SAS RAID controllers for IBM® i, approximately 2 MB in size, see SAS RAID controllers for IBM i
IBM i Information Center website at http://www.ibm.com/systems/i/infocenter

Send feedback Rate this page

Last updated: Mon, December 15, 2014