BACKPLN

Complete the following steps:

1. Were you sent here by a power reference code (1xxxxxxx)?
   • No: Continue with the next step.
   • Yes: Go to SYSBKPL. This ends the procedure.
2. Determine the location of the device by performing the following steps:
   1. Use the location information in the error log if it is available. If no location information for the device is available, use the location information for the I/O adapter instead.
   2. If no location information is available for either the device or the I/O adapter, find the address of the device or I/O adapter (see the System reference code format description). Use the address to find the location. See Part locations and location codes.
   3. Use the location code to determine in which unit the device, cable, and the connected backplane are located. Any backplane connecting the device or I/O adapter might be the cause of the problem. Use the following table to determine the part number for the field replaceable unit (FRU).

      CCIN or FFC	Type and model	Part number	Description	Location code
      	8202-E4B, 8202-E4C, 8202-E4D, 8205-E6B, 8205-E6C, 8205-E6D, 8231-E2B, 8231-E1C, 8231-E1D, 8231-E2C, 8231-E2D, 8233-E8B, 8236-E8C, 8268-E1D	See System parts.	System backplane	Un-P1
      	8248-L4T, 8408-E8D, 8412-EAD, 9109-RMD, 9117-MMB, 9117-MMC, 9117-MMD, 9179-MHB, 9179-MHC, 9179-MHD	See System parts.	System midplane I/O backplane	Un-P1 Un-P2
      520C	5796, 7314-G30	See System parts.	I/O backplane	Un-P1

      This ends the procedure.