Use this procedure to place the rack-mounted system into
the operating position.
When placing the system in the operating position, ensure
that the cables at the rear of the system do not catch or bind as
you push the system unit back into the rack.
- Unlock the blue safety rail latches (A) by lifting
them upward.
Figure 1. Unlocking the safety rail latches
- Push the system unit back into the rack until both system-unit
release latches have locked into position.
Figure 2. Placing
the system in the operating position
- Close the front rack door of the system unit that you are
servicing.
Subscribe to this information
