Model 9406-870 and 9406-890 server specifications

Server specifications provide detailed information for your server, including dimensions, electrical, power, temperature, environment, and service clearances.

This product meets the technical requirements of IEC 61000-3-3.

Models 9406-870 and 9406-890 have some additional information that is important during planning.

For power, see iSeries® 9406-870 and 9406-890 power and height considerations.
For a multiple server installation, see Multiple server installation considerations.
For service clearances, see Service clearances for multiple server installations.
For cooling requirements, see Cooling requirements for multiple server installations.

Table 1. Server specifications
Pictured is the model 9406-870 or 9406-890 server with the 9094 expansion unit
Dimensions	Width	Depth	Height
Metric (mm)	785	1494	2025
English (in.)	30.91	58.83	79.72
Depth without covers		1173.5 mm (46.2 in)
Standard shipping crate	940 mm (37 in.)	1422 mm (56 in.)	2337 mm (92 in.)
Reduced height shipping crate	940 mm (37 in.	1422 mm (56 in.)	2032 mm (80 in.)
Height reduction feature 0126 System frame is included in two pieces to be fully assembled at customer location.			1.65 m (65 in)
Maximum configuration weight	800 kg (1758 lb.)
Electrical and thermal
kVA (maximum) 8-way (9406-870) 16-way (9406-870) 24-way (9406-890) 32-way (9406-890)	6.315 6.315 8.201 10.099
Rated voltage at 50-60 plus or minus 0.5 Hz (3-phase)^{3, 4}	200-240 V ac 380-415 V ac 480 V ac
Rated current (amps per phase) 200-240 V ac 380-415 V ac 480 V ac	45 A 25 A 20 A
Thermal output (maximum) 8-way (9406-870) 16-way (9406-870) 24-way (9406-890) 32-way (9406-890)	20.478 kBtu/hr 20.478 kBtu/hr 26.591 kBtu/hr 32.744 kBtu/hr
Power requirements maximum 8-way (9406-870) 16-way (9406-870) 24-way (9406-890) 32-way (9406-890)	6000 W 6000 W 7791 W 9594 W
Power factor	0.95
Frequency (Hertz)	50 to 60
Inrush current³	163 A
Leakage current	42 mA
Phase	3
Power cord feature 200-240 V ac 380-415 V ac 480 V ac	1300, 1301 1304 1302, 1303
Power cord length	4.3 m (14 ft.) or 1.8 m (6 ft.) (U.S. only)
Compatible receptacle 200-240 V ac 380-415 V ac 480 V ac	IEC 309, 60A 460R9W Not specified, electrician installed IEC 309, 30A 430R7W
Plug type (NoIBM plug type available) 200-240 V ac 380-415 V ac 480 V ac	IEC 309, 60A 460P9W Not specified IEC 309, 30A 430P7W
Temperature requirements
Operating	10 degrees to 32 degrees C (50 degrees to 89.6 degrees F)
Nonoperating	10 degrees to 43 degrees C (50 degrees to 109.4 degrees F)
Storage	1 degrees to 60 degrees C (33.8 degrees to 140 degrees F)
Shipping	-40 degrees to 60 degrees C (-40 degrees to 140 degrees F)
Environment requirements	Operating	Non operating	Storage	Shipping
Noncondensing humidity	8 to 80%	8 to 100%	5 to 80%	5 to 100%
Wet bulb temperature	23 degrees C (73.4 degrees F)	27 degrees C (80.6 degrees F)	29 degrees C (84.2 degrees F)	29 degrees C (84.2 degrees F)
Maximum altitude	2134 m (7000 ft.)
Noise emissions¹	Operating		Idle
L_WAd	7.2 bels		7.2 bels
L_pAm (1-meter bystander)	54 dB		54 dB

Service clearances
Front	Back	Sides *	Top *
1143 mm	914 mm	762 mm	762 mm
45 in.	36 in.	30 in.	30 in.
Note: For a description of noise emission values, see Acoustics. Inrush currents occur only at initial application of power (very short duration for charging capacitors). No inrush currents occur during the normal power on or off cycle. The system will function normally with a nominal input voltage in the range of 200-480 V ac, three phase. The power supplies automatically accept any voltage with the published rated voltage range. If dual power supplies are installed and operating, the power supplies draw approximately equal current from the utility (mains) and provide approximately equal current to the load.

* Side and top clearances are optional when operating if the building floor loading specifications are met.