Model 9115-505 server specifications

Server specifications provide detailed information for your server, including dimensions, electrical, power, temperature, environment, and service clearances.

Use the following specifications to plan for your server.

Server specifications
Rack-mounted drawer
Dimensions Width Depth Height EIA Units3 Weight
Metric 440 mm 710 mm 43 mm 1 17 kg
English 17.3 in. 28.0 in. 1.7 in. 37 lb.
Rack-mounted drawer
Shipping dimensions Width Depth Height Weight
Metric 635 mm 851 mm 330 mm 20 kg
English 25.0 in. 33.5 in. 13.0 in. 43 lb.
Rack-mounted drawer (China)
Shipping dimensions Width Depth Height Weight
Metric 610 mm 1016 mm 445 mm 27 kg
English 24.0 in. 40 in. 17.5 in. 60 lb.

Feature code for drawer mounted in rack

Power distribution Unit (PDU), 0551, 7014-T00, 7014-T42 and 0553 , Start of change0555End of change racks

0259
Electrical
kVA (maximum) 0.526
Rated voltage, rated amps, and frequency4 9115-505

100-127 V ac (12 A) to 200-240 V ac (10 A) at 50 to 60 plus or minus 0.5 Hz

Thermal output (maximum) 1707 Btu/hr
Maximum power consumption 500 W
Power factor 0.95
Inrush current (maximum) 75 A
Leakage current (maximum) 1.2 mA
Phase 1
Compatible plug types 2, 4, 5, 6, 18, 19, 22, 23, 24, 25, 2632, 57, 59, 62 , 66, 69, 70, 73, 75, 76
Dual power feature code 7958 (quantity 2)
Branch circuit breaker 20 A (maximum)
Power cord length

2.8 m (9 ft.) - except United States

1.8 m (6 ft.) - United States

Environment requirements
Recommended operating temperature2 5 degrees to 35 degrees C (41 degrees to 95 degrees F)
Nonoperating temperature 5 degrees to 45 degrees C (41 degrees to 113 degrees F)
Shipping temperature -40 degrees to 60 degrees C (-40 degrees to degrees 140 F)
Operating Nonoperating
Maximum dew point 28 degrees C (82.4 degrees F) 29 degrees C (84.2 degrees F)
Noncondensing humidity 8 to 80% 8 to 80%
Maximum altitude 3048 m (10000 ft.) 3048 m (10000 ft.)
Noise emissions1, 5
Product description Declared A-weighted sound power level, LWad (B) Declared A-weighted sound pressure level, LpAm (dB)
Operating Idle Operating Idle
9115-505 with two hard drives and two power supplies 6.8 6.8 52 52
9115-505 with acoustic door (feature code 6248 or 6249) with two hard drives and two power supplies 6.2 6.2 44 44
Service clearances
Clearances Front Back Left or right Top
Operating 762 mm (30 in.) 762 mm (30 in.)  
Nonoperating 762 mm (30 in.) 762 mm (30 in.) 762 mm (30 in.) 762 mm (30 in.)
Seismic considerations
Data communications
Electromagnetic compatibility compliance: This server meets the following electromagnetic compatibility specifications: FCC (CFR 47, Part 15); VCCI; CISPR-22; 89/336/EEC; BSMI (A2/NZS 3548:1995); C-Tick; ICES/NMB-003; Korean EMI/EMC (MIC Notice 2000–94, Notice 2000–72); People's Republic of China Commodity Inspection Law
Safety compliance: This server is designed and certified to meet the following safety standards: UL 60950; CAN/CSA C22.2 No. 60950–00; EN 60950; IEC 60950 including all National Differences
Note:
  1. For a description of noise emission values, see the Acoustics chapter of the Site Preparation and Physical Planning Guide, SA76-0103.
  2. Class 3 product as defined in ASHRAE Thermal Guidelines for Data Processing Environments. The allowable operating range is 5 degrees to 35 degrees C (41 degrees to 95 degrees F). See the Temperature and humidity design chapter of the Site Preparation and Physical Planning Guide, SA76-0103, for more information.
  3. See 0551, 0553, 7014, or Start of change0555End of change rack configurations for typical configurations when the 0551, 0553, 7014, or Start of change0555End of change rack is populated with various server models.
  4. The power supplies automatically accept any voltage with the published rated voltage range for a defined processor configuration. If dual power supplies are installed and operating, the power supplies draw approximately equal current from the utility (mains) and provide approximately equal current to the load.
  5. All measurements made in conformance with ISO 7779 and declared in conformance with ISO 9296.