Selecting function 21 from the control panel

Use this information to learn about the detailed instructions for selecting function 21 while the system is operational.

1. Select control panel function 21 (Make DST available).

   Select manual mode, and then push the increment (↑) or decrement (↓) button on the control panel until 21 is shown in the Function/Data display. Press the Enter button on the control panel.

2. Sign on to DST.
   Type QSRV as the valid user ID and get the password from the customer. If the customer has changed the full DST authority user ID or password, ask the customer for the correct values.

   Notes:

   • If prompted to change the password, be sure to provide the new or changed password to the customer.
   • If the sign-on attempts to DST exceed the number of allowable attempts, the service tools user ID is disabled. The system administrator with QSECOFR authority needs to reset the user ID.

   The Use Dedicated Service Tools (DST) display is shown. The system is in the full paging environment. This ends the procedure.