Replacing the vital product data card in the 5105-22E, 9008-22L, 9009-22A, 9009-22G, 9223-22H, or 9223-22S

To replace the vital product data card in the system, complete the steps in this procedure.

1. Ensure that you have the electrostatic discharge (ESD) wrist strap on and that the ESD clip is plugged into a ground jack or connected to an unpainted metal surface. If not, do so now.
2. Replace the VPD card.
   1. Align the VPD card in its slot in location P1-C13 on the system backplane as shown in Figure 1.
   2. Push the VPD card into place until it is fully seated.