To be the primary console, the workstation must be operational
and have the correct port and address. If the workstation is a PC,
it must also have an active emulation program on the workstation.
The workstation requirements follow:
- Management consoles
- Twinaxial workstation - Port 0 Address 0
- ASCII workstation - Port 0
- PC attached to ASCII IOP or IOA
- Port 0
- PC software to emulate a 316x or 3151 terminal
- PC attached to twinaxial IOP
- Port 0 Address 0
- 5250 emulator software active on PC
- PC attached to a LocalTalk IOA (6054)
- SNAps 5250 Version 1.2 (or above) application
- Console capable selected on MacIntosh (IOA converts to Port 0
Address 0)
- PC attached to a 2609, 2612, 2699, or 2721 communications IOA
- Client Access Console cable attached to the 2609 or 2612 P2 port
(part number 46G0450 or 46G0479), 2699 (part number 21H3779), or 2721
(part number 44H7504)
- Operations Console cable attached to the 2609 or 2612 (part number
97H7555), 2699 (part number 97H7556), or 2721 (part number 97H7557)
with 5250 emulation or Rumba active on PC
Subscribe to this information