Replacing the chassis management card in the EMX0 PCIe3 expansion drawer

To replace the chassis management card in the EMX0 PCIe3 expansion drawer, complete the steps in this procedure.

Procedure
  1. Ensure that you have the electrostatic discharge (ESD) wrist strap attached. If not, attach it now.
  2. Slide the chassis management card completely into the slot and push the lever (A) up to secure the card. See Figure 1.
    Figure 1. Replacing the chassis management card
    Replacing the chassis management card
  3. Connect the power cord (A) to the power supply (C), as shown in Figure 2. Repeat this step for the remaining power supply.
    Figure 2. Connecting the power cord to the power supply in the EMX0 PCIe3 expansion drawer
    Connecting the power cord to the power supply in the EMX0 PCIe3 expansion drawer



Last updated: Wed, March 02, 2016