Unlocking the cartridge magazine manually

This procedure is used to remove the cartridge magazine manually when, for example, the power is turned OFF or if the magazine fails to unlock in response to the Unlock Magazine command from the Operator Panel and Web User Interface.

Before you begin

To unlock the cartridge magazine manually:

Procedure

  1. On the front panel, locate the access hole for the cartridge magazine lock release mechanism to the left of the Operator Panel (1 in Figure 1).
    Figure 1. Cartridge magazine lock release access hole

    Cartridge magazine lock release access hole


    Cartridge magazine lock release access hole

  2. Insert the end of a straightened paper clip, or similar object, into the lock release access hole. Gently push the lock mechanism to release the lock and eject the cartridge magazine.
  3. If the I/O station is enabled, push the lock mechanism twice or push and hold the lock mechanism until the cartridge is withdrawn far enough to clear the I/O station lock.
  4. Remove the cartridge magazine from the front of the library. If the magazine is stuck in the library and does not eject, see Contacting IBM technical supportContacting Dell technical support
  5. Examine the magazine and cartridges for damage.
    • If there is damage to a cartridge, replace that cartridge.
    • If there is damage to the magazine, replace the magazine.