SAMS0001E No online domain found.
Explanation
Only online domains will be harvested.
Operator response
Start the domain you want to activate the policy for and run harvesting again.
SAMS0002E No nodes found.
Explanation
No nodes found using the command lsrpnode.
Operator response
Ensure that you run the harvesting command in a domain with at least one node.
SAMS0003E Found more than one SAPSID: SAPSID
Explanation
Harvesting found more than one SAPSID. Automatic harvesting is not possible.
Operator response
Specify one of the available SAPSIDs manually using the edit value function of the wizard
SAMS0004E No SAPSID found.
Explanation
No SAPSID found on the system.
Operator response
Ensure that SAP is installed in the directory /usr/sap.
SAMS0005E Invalid number of parameters specified. Parameter parameter is missing.
Explanation
Harvesting cannot be executed successfully if parameters are missing.
Operator response
Ensure that you have specified all previous parameters in the policy template and rerun the harvesting.
SAMS0006E The SAP version SAP version is not supported.
Explanation
This SAP version cannot be harvested.
Operator response
Ensure that a supported SAP version is installed.
SAMS0007E No valid SAP version found.
Explanation
No valid SAP version information found using the disp+work command as SAPADMIN.
Operator response
Ensure that SAP is installed properly.
SAMS0008E No instance directory found for instance type on node node name.
Explanation
No SAP instance directory found.
Operator response
Ensure that SAP is installed properly.
SAMS0009E More than one instance directory found for instance type.
Explanation
More than one instance directory found. This is an SAP configuration error.
Operator response
Ensure that SAP is installed properly.
SAMS0010E No resources of ResourceType=1 and class IBM.AgFileSystem found
Explanation
No resources of ResourceType=1 and class IBM.AgFileSystem found.
Operator response
Ensure that you have configured a shared disk that is represented as IBM.AgFileSystem.
SAMS0011E No network interfaces found
Explanation
No network interfaces found. Searched for all external network interfaces except loopback interfaces.
Operator response
Ensure that you have configured at least one external network interface.
SAMS0012E More than one hostname found for the SAP instance instance name. Select one of these hostnames: hostnames
Explanation
More than one hostname found. Select one of the hostnames found.
Operator response
For your policy, select one of the hostnames found.
SAMS0013E No hostname found for the SAP instance instance name.
Explanation
No virtual hostname found.
Operator response
Ensure that the SAP instance has a profile file /usr/sap/<SAPSID>/SYS/profile.
SAMS0014E More than one instance directory found for instance name. Select one of the instance numbers of the directories found: instance directories
Explanation
More than one instance directory found.
Operator response
Select one of the instance numbers of the listed instance directories.
SAMS0015E More than one Application Server instance directory found for node node name, the instance directories are: instance directories. This cannot be harvested. Enter all required instance directories manually
Explanation
More than one instance directory found on a node.
Operator response
Enter all required instance directories manually.
SAMS0016E For at least one of the specified IBM.AgFileSystem names, neither the SysMountPoint nor the MountPoint attribute is defined and therefore cannot be harvested.
Explanation
In order to harvest a mountpoint for a given IBM.AgFileSystem name, either the attribute SysMountPoint or MountPoint needs to be defined.
Operator response
Define the SysMountPoint or the MountPoint attribute according to the documentation.
SAMS0017I The following network interfaces are available on your local system:
Explanation
The network interfaces which are currently available on your local system are displayed in the lines following this message.
Operator response
Proceed as requested by the policy setup wizard.
SAMS0018I The following node type nodes have been defined in the displayed order:
Explanation
Displays the nodes which are currently defined. The nodes which are currently defined are displayed in the lines following this message.
Operator response
Proceed as requested by the policy setup wizard.
SAMS1001I Start successfully finished for process name process.
Explanation
Displays successful start execution for the specified process.
Operator response
No action required.
SAMS1002E Start failed for process name process.
Explanation
Displays failed start for the specified process.
Operator response
Analyse error log for process and retry start.
SAMS1003I Stop successfully finished for process name process.
Explanation
Displays successful stop execution for the specified process.
Operator response
No action required.
SAMS1004E Stop failed for process name process with flag SA_RESET=SA_RESET flag.
Explanation
Displays failed stop for the specified process.
Operator response
Analyse error log for process.
SAMS1005E Incorrect action Action specified.
Explanation
The parameter Action is incorrect.
Operator response
Use correct parameter action (start, stop or status).
SAMS1006E Script name is running on an unsupported operating system: Operating system
Explanation
Script is not supported on this operating system.
Operator response
Do not use this script on this operating system.
SAMS1007I Start instance successfully finished for instance profile name instance profile.
Explanation
Displays successful start execution for the specified instance.
Operator response
No action required.
SAMS1008E Start instance failed for instance profile name instance profile.
Explanation
Displays failed start for the specified instance.
Operator response
Analyse error log for this instance and retry start.
SAMS1009I Stop instance successfully finished for instance profile name instance profile.
Explanation
Displays successful stop execution for the specified instance.
Operator response
No action required.
SAMS1010E Stop instance failed for instance profile name instance profile with flag SA_RESET=SA_RESET flag.
Explanation
Displays failed stop for the specified instance.
Operator response
Analyse error log for this instance.
SAMS1011I SAP command "SAP command name" starts now for instance profile name instance profile.
Explanation
The specified command will be started now.
Operator response
No action required.
SAMS1012I SAP command "SAP command name" successfully finished for instance profile name instance profile. Command output: SAP command output
Explanation
The specified command successfully ends.
Operator response
No action required.
SAMS1013E SAP command "SAP command name" failed with rc return_code for instance profile name instance profile. Command output: SAP command output
Explanation
The specified command failed.
Operator response
Analyse error log for this instance.
SAMS1014E Command "command name" failed with rc return_code. Command output: command output
Explanation
The specified command failed.
Operator response
Analyse error log for this instance.
SAMS1015E HDB system replication mode did not switch to primary after takeover command completed. Current system replication mode: system replication mode
Explanation
The takeover did not finish successful.
Operator response
Analyse error log for this instance.
SAMS1201I NFS server start - in start section
Explanation
NFS server start in progress
Operator response
No action required.
SAMS1202I NFS server start - IP address: TCP IP not found in DNS, trying /etc/hosts.
Explanation
The TCP IP adress was not found in DNS, trying /etc/hosts.
Operator response
No action required.
SAMS1203I NFS server start - IP address: TCP IP not found in /etc/hosts, using the IP address for rpc.statd.
Explanation
The TCP IP adress was not found in /etc/hosts, using the IP address for rpc.statd.
Operator response
No action required.
SAMS1204I NFS server start, attempting to start daemons - start attempt number: The number of the NFS server start attempt.
Explanation
Attempting to start daemons on NFS server start
Operator response
No action required.
SAMS1205I NFS server started
Explanation
NFS server started
Operator response
No action required.
SAMS1207I NFS server stop, attempting to stop daemons
Explanation
Attempting to stop daemons on NFS server stop
Operator response
No action required.
SAMS1208I NFS server stopped
Explanation
NFS server stopped
Operator response
No action required.
SAMS1209I NFS server is Offline
Explanation
NFS server is Offline
Operator response
No action required.
SAMS1210I NFS server is Online
Explanation
NFS server is Online
Operator response
No action required.
SAMS1211I NFS Server start order issued
Explanation
NFS Server start order issued
Operator response
No action required.
SAMS1212I NFS Server started
Explanation
NFS Server started
Operator response
No action required.
SAMS1213I NFS Server stop order issued
Explanation
NFS Server stop order issued
Operator response
No action required.
SAMS1214I NFS Server stopped
Explanation
NFS Server stopped
Operator response
No action required.
SAMS1215I NFS server start - return code: The return code of the NFS server start script.
Explanation
The NFS start script will return 1 for error or 0 for a successful start attempt
Operator response
No action required.
SAMS1216I NFS server stop - return code: The return code of the NFS server stop script.
Explanation
The NFS stop script will return 1 for error or 0 for a successful stop attempt
Operator response
No action required.
SAMS1251E File /etc/exports does not exist or is not readable; cannot determine if filesystem Mount point which is exportonline needs to be exported...
Explanation
File /etc/exports does not exist or is not readable; cannot determine if the filesystem needs to be exported.
Operator response
Check whether /etc/exports does exist and has sufficient file permissions.
SAMS1252E
Error: Incorrect parameter Action
Usage description
Explanation
Incorrect usage of parameter 'Action'
Operator response
Use a correct parameter regarding to the usage description
SAMS1253E NFS server start - File /etc/init.d/nfslock not found, cannot start NFS server
Explanation
File /etc/init.d/nfslock not found, can not start NFS server.
Operator response
Check whether /etc/exports does exist and has sufficient file permissions.
SAMS1301I Starting Database Oracle system ID.
Explanation
Starting Database.
Operator response
No action required.
SAMS1302I Database Oracle system ID already started.
Explanation
The database is already started
Operator response
No action required.
SAMS1303W Database Oracle system ID possibly left running when system went down, i.e. due to a system crash.
Explanation
The database possibly left running when system went down, i.e. due to a system crash.
Operator response
No action required.
SAMS1304W Database Oracle system ID NOT started.
Explanation
The database is not started
Operator response
No action required.
SAMS1305I Database Oracle system ID started.
Explanation
Database started.
Operator response
No action required.
SAMS1306I Database Oracle system ID started after finish of backup.
Explanation
Database started after finish of backup.
Operator response
No action required.
SAMS1307I Stopping Database Oracle system ID.
Explanation
Stopping Database.
Operator response
No action required.
SAMS1308I Database Oracle system ID shut down.
Explanation
Database shut down.
Operator response
No action required.
SAMS1309W Database Oracle system ID could not be shut down.
Explanation
Database could not be not shut down by System Automation.
Operator response
Ensure that the database is in the proper state which is required for this operation. Ensure that the database can be shut down by System Automation.
SAMS1310I Listener Listener name start rc: Return code
Explanation
Action START returned the return code for the listener.
Operator response
No action required.
SAMS1311I going to kill listener identified by process string: Command line
Explanation
Using given process string to kill listener.
Operator response
No action required.
SAMS1312I Listener Listener name kill process rc: Return code
Explanation
Action KILL returned the return code for the listener.
Operator response
No action required.
SAMS1313I Listener Listener name stop rc: Return code
Explanation
Action STOP returned the return code for the listener.
Operator response
No action required.
SAMS1351E
Can not find init file for Database Oracle system ID
Database Oracle system ID NOT started.
Explanation
Can not find init file for the database.
Operator response
Check whether Oracle home directory has been specified correctly during policy setup.
SAMS1352E Error: Incorrect parameter Action
Explanation
The parameter Action is incorrect
Operator response
Use correct parameter action (start, stop or status)
SAMS1401E SA MP cluster connector - Required cluster command cluster_command is missing.
Explanation
A command required for SA MP cluster connector is not available.
Operator response
Make sure that SA MP is installed and configured correctly.
SAMS1401I SA MP cluster connector loaded successfully. SA MP version: sa_mp_version
Explanation
SA MP cluster connector initialization has been successful.
Operator response
No action required.
SAMS1402E SA MP cluster connector - SA MP domain does not exist or is offline.
Explanation
A SA MP domain does not exist or is in status Offline.
Operator response
Make sure that an online SA MP domain exists.
SAMS1402I SA MP cluster connector - No resource found for SID: sap_sid Instance number: instance_number
Explanation
SA MP cluster connector could not find an automated resource for the given SID and instance number.
Operator response
No action required.
SAMS1403E SA MP cluster connector - Failed to retrieve SA MP version.
Explanation
SA MP cluster connector could not determine SA MP version.
Operator response
Make sure that an online SA MP domain exists.
SAMS1403I SA MP cluster connector invoked with Action: connector_action Resource: resource Cluster Action: cluster_action Output: output_file SID: sap_sid Instance number: instance_number Node: cluster_node
Explanation
SA MP cluster connector has been invoked with the parameters specified.
Operator response
No action required.
SAMS1404E SA MP cluster connector - Error invoking Action: action. Invalid value "value" for parameter "parameter"
Explanation
SA MP cluster connector could not execute specified action, because of invalid parameter value.
Operator response
Make sure that the parameter value is valid.
SAMS1404I SA MP cluster connector Action: connector_function returned with rc: return_code
Explanation
SA MP cluster connector finished processing.
Operator response
No action required.