| U0001 |
- Detecting CSECT
- GTDCDIO
- System Programmer Response
- Contact technical support for assistance.
|
| U0001 |
- Explanation
- EDTINFO RTNNAMD macro failed.
- Detecting CSECT
- GTDDOVA
- Problem Determination
- The abend reason code is the EDTINFO macro return code.
- System Programmer Response
- Contact technical support for assistance.
|
| U0001 |
- Explanation
- Invalid data returned by VSMLIST.
- Detecting CSECT
- GTDCLUP
- Problem Determination
- R2 was loaded from the VSMLIST data area plus four.
- System Programmer Response
- Contact technical support for assistance.
|
| U0002 |
- Explanation
- Open failure.
- Detecting CSECT
- GTDCDIO
- System Programmer Response
- Contact technical support for assistance.
|
| U0002 |
- Explanation
- EDTINFO RTNATTR macro failed.
- Detecting CSECT
- GTDDOVA
- Problem Determination
- The abend reason code is the EDTINFO macro return code.
- System Programmer Response
- Contact technical support for assistance.
|
| U0003 |
- Explanation
- TTR0 conversion failed.
- Detecting CSECT
- GTDCDIO
- System Programmer Response
- Contact technical support for assistance.
|
| U0003 |
- Explanation
- Allocation of the temporary control statement file (DOVAUT1) failed.
- Detecting CSECT
- GTDDOVA
- Problem Determination
- The abend reason code is the value of the S99ERROR code returned by dynamic allocation. Further
information about the failure may be found in the job log.
- System Programmer Response
- Contact technical support for assistance.
|
| U0004 |
- Explanation
- I/O error.
- Detecting CSECT
- GTDCDIO
- System Programmer Response
- Contact technical support for assistance.
|
| U0004 |
- Explanation
- OPEN failed for the temporary control statement file (DOVAUT1).
- Detecting CSECT
- GTDDOVA
- Problem Determination
- The abend reason code is the value of the OPEN macro return code. Further information about the
failure may be found in the job log.
- System Programmer Response
- Contact technical support for assistance.
|
| U0005 |
- Detecting CSECT
- GTDCDIO
- System Programmer Response
- Contact technical support for assistance.
|
| U0005 |
- Explanation
- Migration target volume has been varied online.
- Detecting CSECT
- GTDDOVA
- Problem Determination
- The abend reason code is the value of the target device number (unit address).
- User Response
- If the target volume has not been modified since it was synchronized in the previous TDMF
session, it will be possible to vary the device offline and resubmit the Delayed OVA job. However,
if there is any possibility that this volume is no longer an exact Point-In-Time copy of its source
volume, it should not be used in a DOVA job.
- System Programmer Response
- Contact technical support for assistance.
|
| U0006 |
- Detecting CSECT
- GTDCDIO
- System Programmer Response
- Contact technical support for assistance.
|
| U0007 |
- Detecting CSECT
- GTDCDIO
- System Programmer Response
- Contact technical support for assistance.
|
| U0007 |
- Explanation
- RDJFCB failed for the temporary communications dataset (DOVACOM).
- Detecting CSECT
- GTDDOVA
- Problem Determination
- The abend reason code is the value of the RDJFCB macro return code.
- System Programmer Response
- Contact technical support for assistance.
|
| U0008 |
- Detecting CSECT
- GTDCDIO
- System Programmer Response
- Contact technical support for assistance.
|
| U0008 |
- Explanation
- An I/O error occurred which could not be attributed to a single track of the volume.
- Detecting CSECT
- GTDSCAN
- Problem Determination
- The abend reason code is the virtual address of the IOB which encountered the I/O error.
- System Programmer Response
- Contact technical support for assistance.
|
| U0009 |
- Detecting CSECT
- GTDCDIO
- System Programmer Response
- Contact technical support for assistance.
|
| U0010 |
- Detecting CSECT
- GTDCDIO
- System Programmer Response
- Contact technical support for assistance.
|
| U0010 |
- Detecting CSECT
- GTDBMON
- Problem Determination
- Reason Codes:
- 4 GQSCAN failed
- 5 No RIBs returned
- 6 TDMF not on page boundary
- 7 Eye catcher error
- 9 Number of volumes mismatch
- 10 MSE pointer bad
- 11 MSV eyecatcher error
- 56 MSE unfetchable
- 57 MSV unfetchable
- 58 TSOM unfetchable
- 59 Cannot match volser in TSOM
- System Programmer Response
- Contact technical support for assistance.
|
| U0010 |
- Explanation
- Unsuccessful I/O request to read the volume label from the offline target device.
- Detecting CSECT
- GTDDOVA
- System Programmer Response
- Contact technical support for assistance.
|
| U0011 |
- Detecting CSECT
- GTDCDIO
- System Programmer Response
- Contact technical support for assistance.
|
| U0012 |
- Detecting CSECT
- GTDCDIO
- System Programmer Response
- Contact technical support for assistance.
|
| U0013 |
- Detecting CSECT
- GTDCDIO
- System Programmer Response
- Contact technical support for assistance.
|
| U0014 |
- Detecting CSECT
- GTDCDIO
- System Programmer Response
- Contact technical support for assistance.
|
| U0014 |
- Explanation
- RDJFCB failed for the migration communications dataset (SYSCOM).
- Detecting CSECT
- GTDDOVA
- Problem Determination
- The abend reason code is the value of the RDJFCB macro return code.
- User Response
- Ensure the JCL contains a SYSCOM DD statement.
- System Programmer Response
- Contact technical support for assistance.
|
| U0015 |
- Detecting CSECT
- GTDCDIO
- System Programmer Response
- Contact technical support for assistance.
|
| U0015 |
- Explanation
- Migration communications dataset is in use. The GTDDOVA program is unable to gain exclusive
control of the dataset referenced by the SYSCOM DD statement. The dataset is probably still in use
with a migration session.
- Detecting CSECT
- GTDDOVA
- Problem Determination
- The abend reason code is the value of the return code from the ENQ macro (with RET=USE).
- System Programmer Response
- Contact technical support for assistance.
|
| U0016 |
- Explanation
- A target volume UCB is unusable.
- Detecting CSECT
- GTDDOVA
- Problem Determination
- The UCB flags that are checked to determine the usability of the device are as follows:
- UCBBOX Device forced offline
- UCBDEFER Device temporarily unusable
- UCBHILVL UCB level is not normal
- UCBNOCON No subchannel for device
- UCBNOPTH No operational paths to device
- UCBPERM Subchannel for device is unusable
- The abend reason code is the value of the target device number (unit address).
- User Response
- Correct the device error, vary it online and offline, then resubmit the Delayed OVA job.
- System Programmer Response
- Contact technical support for assistance.
|
| U0029 |
|
| U0052 |
- Detecting CSECT
- GTDBMON
- System Programmer Response
- Contact technical support for assistance.
|
| U0053 |
- Explanation
- Bad CIB.
- Detecting CSECT
- GTDBMON
- System Programmer Response
- Contact technical support for assistance.
|
| U0101 |
- Detecting CSECT
- GTDIP01
- System Programmer Response
- Contact technical support for assistance.
|
| U0101 |
- Explanation
- Syntax error in the supplied execution parameter.
- Detecting CSECT
- GTDVTOC
- System Programmer Response
- Contact technical support for assistance.
|
| U0101 |
- Explanation
- Unsuccessful DEBCHK ADD macro. The DEBCHK return code is used as the Abend reason code.
- Detecting CSECT
- GTDCLUP
- System Programmer Response
- Contact technical support for assistance.
|
| U0103 |
- Explanation
- Open failure for the SYSPRINT output file.
- Detecting CSECT
- GTDVTOC
- Problem Determination
- The reason code is the return code from the OPEN SVC, SVC 19.
- System Programmer Response
- Contact technical support for assistance.
|
| U0103 |
- Explanation
- Open failure for the SYSIN or SYSPRINT file.
- Detecting CSECT
- GTDEXTV
- Problem Determination
- The reason code is the return code from the OPEN SVC, SVC 19.
- User Response
- Ensure that the SYSIN and SYSPRINT DD statements are provided.
- System Programmer Response
- Contact technical support for assistance.
|
| U0104 |
- Explanation
- Unexpected return code from the UCBSCAN service.
- Detecting CSECT
- GTDVTOC
- Problem Determination
- The reason code is comprised of the UCBSCAN reason code in bits 0-15 and the UCBSCAN return code
in bits 16-31.
- System Programmer Response
- Contact technical support for assistance.
|
| U0105 |
- Explanation
- Dynamic allocation failed for a VTOC.
- Detecting CSECT
- GTDVTOC
- Problem Determination
- The parameters used were:
DSN=FORMAT4.DSCB,DISP=SHR,UNIT=SYSALLDA,VOL=SER=volser
The reason code is the return code from SVC 99; R14 contains the address of the dynamic
allocation request block.
- System Programmer Response
- Contact technical support for assistance.
|
| U0106 |
- Explanation
- RDJFCB failed for the dynamically allocated FORMAT4.DSCB data set (VTOC).
- Detecting CSECT
- GTDVTOC
- Problem Determination
- The reason code is the return code from SVC 64 (RDJFCB).
- System Programmer Response
- Contact technical support for assistance.
|
| U0107 |
- Explanation
- Open failure for the Volume Table of Contents (VTOC) on the dynamically allocated volume.
- Detecting CSECT
- GTDVTOC
- Problem Determination
- The reason code is the return code from SVC 22.
- System Programmer Response
- The reason code is the return code from SVC 22.
|
| U0108 |
- Explanation
- Five second interrupt for VTOC OPEN processing.
- Detecting CSECT
- GTDVTOC
- System Action
- GTDVTOC normally recovers from this internally generated notification abend and will continue
normal processing. If it does not, GTDVTOC will terminate the step.
- Problem Determination
- The reason code is the device number currently being processed.
- System Programmer Response
- Contact technical support for assistance.
|
| U0109 |
- Explanation
- Error following SSID control blocks.
- Detecting CSECT
- GTDTERA
- Problem Determination
- Rerun the job with a SYSUDUMP DD statement to gather the dump.
- System Programmer Response
- Contact technical support for assistance.
|
| U0110 |
- Explanation
- GETMAIN error.
- Detecting CSECT
- GTDTERA
- Problem Determination
- Rerun the job with a SYSUDUMP DD statement to gather the dump.
- System Programmer Response
- Contact technical support for assistance.
|
| U0135 |
- Explanation
- EXCP failure. Message GTD9435S is issued prior to the abnormal termination request.
- Detecting CSECT
- GTDEXTV
- Problem Determination
- Use GPR2 (IOB pointer) and the SYSUDUMP output to determine the cause of the error.
- System Programmer Response
- Contact technical support for assistance.
|
| U0136 |
- Explanation
- EXCP failure. Message GTD9436S is issued prior to the abnormal termination request.
- Detecting CSECT
- GTDEXTV
- Problem Determination
- Use GPR2 (IOB pointer) and the SYSUDUMP output to determine the cause of the error.
- System Programmer Response
- Contact technical support for assistance.
|
| U0137 |
- Explanation
- EXCP failure. Message GTD9437S is issued prior to the abnormal termination request.
- Detecting CSECT
- GTDEXTV
- Problem Determination
- Use GPR2 (IOB pointer) and the SYSUDUMP output to determine the cause of the error.
- System Programmer Response
- Contact technical support for assistance.
|
| U0138 |
- Explanation
- EXCP failure. Message GTD9438S is issued prior to the abnormal termination request.
- Detecting CSECT
- GTDEXTV
- Problem Determination
- Use GPR2 (IOB pointer) and the SYSUDUMP output to determine the cause of the error.
- System Programmer Response
- Contact technical support for assistance.
|
| U0145 |
- Explanation
- EXCP failure. Message GTD9445S is issued prior to the abnormal termination request.
- Detecting CSECT
- GTDEXTV
- Problem Determination
- Use GPR2 (IOB pointer) and the SYSUDUMP output to determine the cause of the error.
- System Programmer Response
- Contact technical support for assistance.
|
| U0147 |
- Explanation
- EXCP failure. Message GTD9447S is issued prior to the abnormal termination request.
- Detecting CSECT
- GTDEXTV
- Problem Determination
- Use GPR2 (IOB pointer) and the SYSUDUMP output to determine the cause of the error.
- System Programmer Response
- Contact technical support for assistance.
|
| U2004 |
- Explanation
- Open failure for the SYSPRINT dataset.
- Detecting CSECT
- GTDQDSK
- System Programmer Response
- Contact technical support for assistance.
|
| U2006 |
- Explanation
- RDJFCB failure.
- Detecting CSECT
- GTDQDSK
- System Programmer Response
- Contact technical support for assistance.
|
| U2007 |
- Explanation
- Open failure for the Volume Table of Contents.
- Detecting CSECT
- GTDQDSK
- System Programmer Response
- Contact technical support for assistance.
|
| U2051 |
- Explanation
- Validity check for the Data Facilities Area (DFA) control block failed.
- Detecting CSECT
- GTDQDSK
- Problem Determination
- General purpose register 3 at the time of the abend contains the address of the invalid
block.
- System Programmer Response
- Contact technical support for assistance.
|
| U2052 |
- Explanation
- Validity check for the Data Facilities Vector Table (DFVT) control block failed.
- Detecting CSECT
- GTDQDSK
- Problem Determination
- General purpose register 3 at the time of the abend contains the address of the invalid
block.
- System Programmer Response
- Contact technical support for assistance.
|
| U2053 |
- Explanation
- Validity check for the SSSVT control block failed.
- Detecting CSECT
- GTDQDSK
- Problem Determination
- General purpose register 3 at the time of the abend contains the address of the invalid block.
- System Programmer Response
- Contact technical support for assistance.
|
| U2054 |
- Explanation
- Either the pointer in the SSSVT to the SSSCT was zero, or the validity check of the SSSCT
control block failed.
- Detecting CSECT
- GTDQDSK
- Problem Determination
- General purpose register 3 at the time of the abend contains the address of the invalid SSSCT
control block.
- System Programmer Response
- Contact technical support for assistance.
|
| U2055 |
- Explanation
- The counter of SSSCBs in the SSSCT is zero.
- Detecting CSECT
- GTDQDSK
- Problem Determination
- General purpose register 3 at the time of the abend contains the address of the SSSCT control
block.
- System Programmer Response
- Contact technical support for assistance.
|
| U2056 |
- Explanation
- Validity check for the SSSCB control block failed.
- Detecting CSECT
- GTDQDSK
- System Programmer Response
- Contact technical support for assistance.
|
| U2057 |
- Explanation
- Validity check for the SSSBDH control block failed.
- Detecting CSECT
- GTDQDSK
- System Programmer Response
- Contact technical support for assistance.
|
| U2077 |
- Explanation
- An I/O error occurred while attempting to read the device characteristics and configuration
data.
- Detecting CSECT
- GTDQDSK
- Problem Determination
- General purpose register 3 at the time of the abend points to the IOB.
- System Programmer Response
- Contact technical support for assistance.
|
| U3700 |
- Explanation
- GTDIMON can not locate DDTE at DIE exit.
- Detecting CSECT
- GTDIMON
- System Programmer Response
- Contact technical support for assistance.
|
| U3895 |
- Explanation
- ICKDSF processing has been terminated because the program has been waiting for an ENQ resource
for more than one minute.
- Detecting CSECT
- GTDCSEL
- System Programmer Response
- Contact technical support for assistance.
|
| U3896 |
- Explanation
- The TDMF session was terminated by the Hang Monitor with recovery routine percolation forced.
The Hang Monitor determined that an earlier attempt to resolve a hang in the TDMF main task was not
successful.
- Detecting CSECT
- GTDHMON
- System Programmer Response
- Contact technical support for assistance.
|
| U3897 |
- Explanation
- The Hang Monitor failed to terminate the TDMF session.
This abend is accompanied by message
SDR9468I. The return code from the CALLRTM macro is displayed in the message and is used as the
reason code for this abend.
- Detecting CSECT
- GTDHMON
- System Programmer Response
- Contact technical support for assistance.
|
| U3898 |
- Explanation
- The TDMF session was terminated by the Hang Monitor.
- Detecting CSECT
- GTDHMON
- System Programmer Response
- Contact technical support for assistance.
|
| U3899 |
- Explanation
- The OVA job was terminated by a TDMF session. The GTD session has determined that I/O
redirection is no longer possible for one or more volumes to which the OVA job has registered. I/O
redirection is no longer in effect for the volume. Thus, I/O requests made by this OVA job to the
volume are prevented by TDMF. This will usually result in error messages from Data Management as
attempts are made to access the volume's VTOC and VVDS during job termination.
- Detecting CSECT
- GTDKVOL, GTDRTNV
- System Programmer Response
- Contact technical support for assistance.
|
| U4000 |
|
| U4001 |
- Detecting CSECT
- GTDMAIN, GTDRTNM
- System Action
- TDMF execution is terminated.
- System Programmer Response
- Contact technical support for assistance.
|
| U4003 |
- Detecting CSECT
- GTDMAIN, GTDRTNM
- System Action
- TDMF execution is terminated.
- System Programmer Response
- Contact technical support for assistance.
|
| U4008 |
- Explanation
- TRANSWAP error.
- Detecting CSECT
- GTDINIT
- System Action
- TDMF execution is terminated.
- System Programmer Response
- Contact technical support for assistance.
|
| U4010 |
- Explanation
- Unable to obtain storage.
- Detecting CSECT
- GTDMAIN
- System Action
- TDMF execution is terminated.
- System Programmer Response
- Contact technical support for assistance.
|
| U4011 |
- Explanation
- Unable to obtain storage for the main TDMF control block from the ECSA subpool.
- Detecting CSECT
- GTDMAIN
- System Action
- TDMF execution is terminated.
- System Programmer Response
- Contact technical support for assistance.
|
| U4011 |
- Detecting CSECT
- GTDRTNV
- System Action
- TDMF execution is terminated.
- Problem Determination
- System Programmer Response
- Contact technical support for assistance.
|
| U4012 |
- Explanation
- Unable to obtain storage.
- Detecting CSECT
- GTDMAIN
- System Programmer Response
- Contact technical support for assistance.
|
| U4012 |
- Detecting CSECT
- GTDRTNV
- System Action
- TDMF execution is terminated.
- System Programmer Response
- Contact technical support for assistance.
|
| U4013 |
- Explanation
- Unable to obtain storage.
- Detecting CSECT
- GTDMAIN
- System Action
- TDMF execution is terminated.
- System Programmer Response
- Contact technical support for assistance.
|
| U4014 |
- Explanation
- Unable to obtain storage.
- Detecting CSECT
- GTDMAIN
- System Action
- TDMF execution is terminated.
- System Programmer Response
- Contact technical support for assistance.
|
| U4015 |
- Explanation
- Unable to obtain storage.
- Detecting CSECT
- GTDMAIN
- System Action
- TDMF execution is terminated.
- System Programmer Response
- Contact technical support for assistance.
|
| U4039 |
- Explanation
- Out of save area stack entries.
- Detecting CSECT
- GTDADDT, GTDBDDT, GTDCMSG, GTDCOM1, GTDCOM2, GTDIBM, GTDINIT, GTDINSE, GTDMOPT, GTDMSTR,
GTDRTNM, GTDRTNV, GTDSIO, GTDSLAV, GTDSTK, GTDVUCB
- System Action
- TDMF execution is terminated.
- System Programmer Response
- Contact technical support for assistance.
|
| U4040 |
- Explanation
- LOAD macro failed for a TDMF module.
- Detecting CSECT
- GTDMAIN
- System Action
- TDMF execution is terminated.
- Problem Determination
- The name of the module that could not be loaded into virtual storage is placed into general
purpose registers 4 and 5. The ABEND reason code contains, in bits 0-15, the original hexadecimal
abend code from the LOAD macro and, in bits 16-31, the corresponding reason code. For example, if
the module name in GPR 4 and 5 could not be found in the STEPLIB library, the reason code will be
08060004 .
- System Programmer Response
- Contact technical support for assistance.
|
| U4095 |
- Explanation
- Save area stack indicator corrupted.
- Detecting CSECT
- GTDADDT, GTDBDDT, GTDCMSG, GTDCOM1, GTDCOM2, GTDIBM, GTDINIT, GTDINSE, GTDMOPT, GTDMSTR,
GTDRTNM, GTDRTNV, GTDSIO, GTDSLAV, GTDSTK, GTDVUCB
- System Action
- TDMF execution is terminated.
- Problem Determination
- The TDMF save area stack entry word 0 indicates that the entry is neither free or in use.
- System Programmer Response
- Contact technical support for assistance.
|